Nissan D21 Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(41)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(41)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Nissan D21 Car Battery Replacement is $300 with $160 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Nissan D21V6-3.0LService typeCar Battery ReplacementEstimate$522.16Shop/Dealer Price$617.55 - $895.62
1993 Nissan D21L4-2.4LService typeCar Battery ReplacementEstimate$513.15Shop/Dealer Price$606.77 - $883.52
1990 Nissan D21L4-2.4LService typeCar Battery ReplacementEstimate$513.15Shop/Dealer Price$606.80 - $883.56
1991 Nissan D21V6-3.0LService typeCar Battery ReplacementEstimate$513.15Shop/Dealer Price$606.80 - $883.56
1990 Nissan D21V6-3.0LService typeCar Battery ReplacementEstimate$513.15Shop/Dealer Price$608.27 - $886.14
1992 Nissan D21L4-2.4LService typeCar Battery ReplacementEstimate$513.15Shop/Dealer Price$606.94 - $883.81
1991 Nissan D21L4-2.4LService typeCar Battery ReplacementEstimate$513.15Shop/Dealer Price$606.81 - $883.59
1994 Nissan D21L4-2.4LService typeCar Battery ReplacementEstimate$513.15Shop/Dealer Price$606.80 - $883.56
Show example Nissan D21 Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(41)

Rating Summary
38
1
0
0
2
38
1
0
0
2

Larry

15 years of experience
44 reviews
Larry
15 years of experience
D21 1990 - Radiator - Atlanta, GA
On time and very knowledgeable.

Eliud

20 years of experience
148 reviews
Eliud
20 years of experience
D21 1989 - Distributor - Grayson, GA
Best ever

Joel

25 years of experience
77 reviews
Joel
25 years of experience
D21 1989 - Idle Control Valve - Glendale, AZ
He was very informative about the problem and he was knowledgeable about the problem but unfortunately he wasn't able to fix it because the part was discontinued. I will definitely recommend his services to anyone. Thanks Merlyn

Chet

35 years of experience
613 reviews
Chet
35 years of experience
D21 1993 - Clutch Slave Cylinder - San Diego, CA
Chet was courteous and very knowledgeable. He completed the job in the estimated time and made some good recommendations for things that needed to be done.

Excellent Rating

(41)

Rating Summary
38
1
0
0
2
38
1
0
0
2
Number of Nissan D21 services completed
451+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1600+
experts on our platform

Recent articles & questions

P0116 OBD-II Trouble Code: ECT Sensor Circuit Range Performance Problem
P0116 P0116 code definition Engine Coolant Temperature (ECT) sensor circuit range performance problem What the P0116 code means P0116 is the OBD-II generic code that indicates the engine control module (ECM) ECT monitor has read that the ECT sensor range...
The Guide to Cracked Windshield Laws in All States
It It goes without saying that a driver needs to be able to see well in order to drive safely. Because of this, there are certain laws and rules that govern the quality that a vehicle’s windshield must be in....
B1965 OBD-II Trouble Code: Seat Horizontal Forward/Rearward Potentiometer Feedback Circuit Short to Ground
B1965 means there is an issue with the power seat potentiometer, likely that it is malfunctioning due to an electrical problem.

Is there a way to check my computer to see if it's faulty or not?

Your computer is located inside the car and would need to be tested by scanning the computer to see if it is storing fault codes (https://www.yourmechanic.com/article/how-to-read-and-understand-check-engine-light-codes-by-jason-unrau) for an internal problem or an indication to some engine sensors that may have...

My car started to make a howling noise. A service center said it needs a new driveshaft i.e. Propeller shaft. There is no vibration.

Hi there. Your vehicle has CV shafts that drive the wheels. A howling noise is more of a wheel bearing grinding sound. Raise up the vehicle and rotate all 4 wheels and listen to there sounds. If a wheel is...

What should I do to fix if my car displayed "ac off due to high engine temp" on my 2012 Chevrolet Cruze

Hello. If this message is coming on then the computer is detecting that the engine is overheating. I would check the coolant level first. If it is low then there is a coolant loss issue. If the level is fine...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com