Nissan 280ZX Serpentine/Drive Belt Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(12)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(12)

Serpentine/Drive Belt Replacement Service

How much does a Serpentine/Drive Belt Replacement cost?

On average, the cost for a Nissan 280ZX Serpentine/Drive Belt Replacement is $105 with $11 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1981 Nissan 280ZXL6-2.8L TurboService typeSerpentine/Drive Belt ReplacementEstimate$135.99Shop/Dealer Price$151.24 - $174.49
1979 Nissan 280ZXL6-2.8LService typeSerpentine/Drive Belt ReplacementEstimate$189.95Shop/Dealer Price$223.71 - $302.44
1980 Nissan 280ZXL6-2.8LService typeSerpentine/Drive Belt ReplacementEstimate$262.45Shop/Dealer Price$314.33 - $447.44
1982 Nissan 280ZXL6-2.8L TurboService typeSerpentine/Drive Belt ReplacementEstimate$115.99Shop/Dealer Price$131.24 - $154.48
1983 Nissan 280ZXL6-2.8LService typeSerpentine/Drive Belt ReplacementEstimate$189.95Shop/Dealer Price$223.72 - $302.47
1983 Nissan 280ZXL6-2.8L TurboService typeSerpentine/Drive Belt ReplacementEstimate$115.99Shop/Dealer Price$131.26 - $154.52
1982 Nissan 280ZXL6-2.8LService typeSerpentine/Drive Belt ReplacementEstimate$194.95Shop/Dealer Price$228.57 - $307.20
1981 Nissan 280ZXL6-2.8LService typeSerpentine/Drive Belt ReplacementEstimate$284.11Shop/Dealer Price$340.39 - $486.18
Show example Nissan 280ZX Serpentine/Drive Belt Replacement prices

What is a serpentine belt and how does it work?

A serpentine belt is a relatively long, flat, multi-ribbed belt that is driven by the engine’s crankshaft pulley. The belt drives many, and often all, of the engine accessories such as the alternator, air conditioning compressor, power steering pump, water pump, and air pump. The serpentine belt is tensioned by a hydraulic or spring-loaded automatic tensioner. Some older cars use a serpentine belt to drive most accessories but will also have a shorter v-style belt to drive, for example, the power steering pump.

Belts

When to consider replacing the serpentine belt:

  • Regularly scheduled maintenance. Typically, belt manufacturers recommend belt replacement at 90,000 miles. However, the belt must be inspected for wear or damage at regular intervals prior to this high mileage.
  • Squealing noise, belt slippage, visible belt damage. Should the belt fail or wear out prematurely, you may hear noise or you may see visible signs of deterioration such as missing chunks of rubber, excessive cracking, or a shredded appearance on the edge of the belt.
  • Battery Light. A loose belt, perhaps caused by a defective tensioner, may not drive the alternator at adequate speed and thus the battery may discharge, causing the warning light to illuminate.
  • Engine overheating. Often, the serpentine belt drives the water pump. In those applications, if the belt breaks the engine will overheat in seconds to minutes. If the belt is inadequately tensioned, you may notice higher-than-normal engine operating temperature.

How do mechanics replace the serpentine belt?

  • Prior to removing the belt, the mechanic must run the engine to determine if the idler pulley and the belt tensioner are noise-free. Those rotating components have grease filled bearings and are subject to wear. In addition, the mechanic will ensure that all pulleys and accessories are turning in the same plane. These steps help make sure your new belt will operate trouble-free for its full-service life.
  • The belt’s routing path through the various components is noted. The belt tensioner is released, usually with a wrench or lever, to release the tension from the belt. With the tension off, the belt slides off the pulleys.
  • All rotating components — that is the alternator, air conditioner compressor, etc. — are checked for smooth operation and no noise.
  • If everything checks out, the new belt is slipped over all of the pulleys while holding the tensioner away from the belt. Once the belt is centered on all pulleys, the tensioner is released and the installation is complete. The engine is run to ensure normal operation.

Is it safe to drive with a serpentine belt problem?

No. Should the belt have visible damage, you risk unexpected and sudden breakage that could potentially leave you stranded. Serpentine belt problems that result in the alternator not charging may cause the battery to discharge, which will result in loss of electrical power to the vehicle. Additionally, if a deteriorated belt breaks and that belt drives the water pump, the engine will overheat in a matter of seconds.

When replacing the serpentine belt keep in mind:

  • On many cars, the expected service life of a serpentine belt is around 90,000 miles. Should the belt fail well prior to that, a very careful inspection should be performed to check for out-of-alignment pulleys, a possibly out-of-position crankshaft harmonic balancer on which the drive pulley is mounted, binding pulleys, or a defective belt tensioner.
  • Attention should always be given to serpentine belt routing, since proper routing is critical to proper belt tension, and function of the driven components.
  • Sometimes it is difficult to distinguish serpentine belt related noise from other engine noises. In these cases, a mechanic will determine the origin of the noise by momentarily running the engine without the serpentine belt attached.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(12)

Rating Summary
12
0
0
0
0
12
0
0
0
0

Joseph

33 years of experience
540 reviews
Joseph
33 years of experience
Nissan 280ZX L6-2.8L - Clutch Master Cylinder - Dallas, Texas
Joseph was prompt, knowledgable, tested thoroughly and was a pleasure to work with.

Scott

21 years of experience
144 reviews
Scott
21 years of experience
Nissan 280ZX L6-2.8L Turbo - Other Inspections - San Diego, California
Scot was great.

Michael

21 years of experience
244 reviews
Michael
21 years of experience
Nissan 280ZX L6-2.8L - Car is not starting - Fontana, California
Great guy

Eduardo

12 years of experience
41 reviews
Eduardo
12 years of experience
Nissan 280ZX L6-2.8L - Oil Change - Anaheim, California
This service was excellent. He was prompt, professional, and very knowledgeable! Thanks Eduardo! I'll DEFINITELY use this service again!

Excellent Rating

(12)

Rating Summary
12
0
0
0
0
12
0
0
0
0
Number of Nissan 280ZX services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1500+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Clutch Cable
If your manual car's transmission is slipping out of gear or clutch pedal is hard or sinking to the floor, you may have to replace the clutch cable.
P2265 OBD-II Trouble Code: Water in Fuel Sensor Circuit Range/Performance
P2265 P2265 code definition The P2265 diagnostic trouble code is an indication that there is a range/performance issue with the water in fuel sensor circuit. Related Trouble Codes: P2264 OBD-II Trouble Code: Water in Fuel Sensor Circuit P2266 OBD-II Trouble...
P3419 OBD-II Trouble Code: Cylinder 3 Deactivation/Intake Valve Control Circuit Low
P3419 means a problem was detected with the cylinder deactivation mode due to bad lifters, sensors, solenoids, electrical issues, or low oil pressure.

Whining during acceleration with high RPMs, in lower gears and overdrive

I agree with the mechanic that checked it. It needs to have the transmission overhauled. I cannot make the decision if you should get it done or not, since it is a very expensive repair and may exceed the value...

will not start - 2008 Volkswagen Touareg

Hello. Typically when you have power but nothing else turning over it is a starter issue (https://www.yourmechanic.com/services/starter-replacement). You can try tapping the starter while you turn the key. If the starter turns over but won't start, you may have a...

Check Engine Light does not come on even though there are trouble codes present

The pink/light green wire in ECM pin 2 on the connector will ground the wire internally to the ECM to turn on the Check Engine Light. You could test the wire with the key on and it should have battery...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com