Nissan 240SX Fuel Injector Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Nissan 240SX Fuel Injector Replacement is $716 with $576 for parts and $140 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
1991 Nissan 240SXL4-2.4L	Service typeFuel Injector Replacement	Estimate$1648.58	Shop/Dealer Price$2000.97 - $3044.37
1994 Nissan 240SXL4-2.4L	Service typeFuel Injector Replacement	Estimate$1641.80	Shop/Dealer Price$1993.33 - $3040.88
1997 Nissan 240SXL4-2.4L	Service typeFuel Injector Replacement	Estimate$1633.08	Shop/Dealer Price$1982.47 - $3023.51
1993 Nissan 240SXL4-2.4L	Service typeFuel Injector Replacement	Estimate$1641.80	Shop/Dealer Price$1993.37 - $3040.95
1992 Nissan 240SXL4-2.4L	Service typeFuel Injector Replacement	Estimate$1641.80	Shop/Dealer Price$1995.87 - $3045.33
1995 Nissan 240SXL4-2.4L	Service typeFuel Injector Replacement	Estimate$1633.08	Shop/Dealer Price$1982.71 - $3023.93
1990 Nissan 240SXL4-2.4L	Service typeFuel Injector Replacement	Estimate$1297.73	Shop/Dealer Price$1587.54 - $2452.75
1996 Nissan 240SXL4-2.4L	Service typeFuel Injector Replacement	Estimate$1633.08	Shop/Dealer Price$1982.47 - $3023.51

Show example Nissan 240SX Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(44)

Rating Summary

36

5

2

1

0

36

5

2

1

0

SEE REVIEWS NEAR ME

Alex

23 years of experience

112 reviews

Alex

23 years of experience

by Dustin

Nissan 240SX L4-2.4L - Check Engine Light is on - Phoenix, Arizona

Got right down to the point and told me what I needed to hear, great experience with Alex.

Steven

15 years of experience

425 reviews

Steven

15 years of experience

by David

Nissan 240SX L4-2.4L - Clutch Master Cylinder - Glendale, Arizona

Steven did a great job replacing my clutch master cylinder. He even gave me a few conctacts to help fix a wiring issue that yourmechanic.com people usually don't do because of aftermarket issues. Thanks steven and hope to have you again if anything else goes wrong.

H

27 years of experience

828 reviews

H

27 years of experience

by JEAN

Nissan 240SX L4-2.4L - Alternator - Palo Alto, California

the maintenance provided did not fix the problem

H

27 years of experience

828 reviews

H

27 years of experience

by Karen

Nissan 240SX L4-2.4L - Smell in the car - Palo Alto, California

Nice, Friendly and Knowledgeable

Excellent Rating

(44)

Rating Summary

36

5

2

1

0

36

5

2

1

0

SEE REVIEWS NEAR ME

Recent articles & questions

How Long Does an Air Spring Bag Last?

Air Air suspension systems have been in place for a long time in the trucking industry, and over the past decade, they have moved into ordinary passenger vehicles. The support to the springs is delivered by means of air spring...

P2771 OBD-II Trouble Code: 4WD Low Switch Circuit

P2771 means the system detected a problem with four-wheel-drive low switch usually caused by bad sensors or solenoids or an electrical issue.

How to Buy a Good Quality Radar Detector

Have Have you ever been caught by radar and then nailed with a speeding ticket? One time is usually enough for people to always want to avoid this from happening in the future. A radar detector is an accessory you...

ABS, traction control and 4wd lights come on, brakes dragging? 2008 Jeep Patriot

Hello - mostly likely, a malfunctioning wheel speed sensor or other ABS sensor (https://www.yourmechanic.com/article/what-sensors-make-the-abs-work) is causing these symptoms. ABS, traction control and auto-engaging 4WD are integrated systems, and share sensors. A malfunction in one system can bleed over to the...

Hi Guys My car doesn't want to select gears anymore. I have to force the gear in everytime. could it be a problem with the gearbox

The problem may be the transmission clutch is not disengaging enough to allow the gear change. Have the clutch checked first for proper operation. If clutch is operating good then the problem is with the synchronized gears inside the transmission...

1995 BMW 318i starter wiring

The black/yellow wire is the ignition wire, which goes to a small stud on the starter. The large red cables come from the battery and power distribution box. They go to the large stud on the starter. The black/green wire...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com