Mitsubishi Raider Transfer case fluid is dirty Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(15)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(15)

Transfer case fluid is dirty Inspection Service

How much does a Transfer case fluid is dirty Inspection cost?

On average, the cost for a Mitsubishi Raider Transfer case fluid is dirty Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Mitsubishi RaiderV6-3.7LService typeTransfer case fluid is dirty InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2007 Mitsubishi RaiderV6-3.7LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2009 Mitsubishi RaiderV6-3.7LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2007 Mitsubishi RaiderV8-4.7LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2008 Mitsubishi RaiderV6-3.7LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2006 Mitsubishi RaiderV8-4.7LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Mitsubishi Raider Transfer case fluid is dirty Inspection prices

A transfer case is unique to all-wheel drive and four-wheel drive vehicles, sending power from the engine to the rear wheels. The transfer case is a sealed unit and may be either gear-driven or chain-driven depending on the manufacturer. Because the transfer case is a sealed unit, it requires lubrication to keep all of the moving parts clean and at a reasonable temperature. Transfer case fluid ensures the longevity of parts in the transfer case.

How this system works:

In four-wheel drive and all-wheel drive vehicles, a transfer case is either connected directly to the back of the transmission, or by a small driveshaft further back in the vehicle. When activated, the transfer case takes power from the engine to the back wheels. Depending on the kind of vehicle, power may go to the rear wheels on a full-time or part-time basis. All-wheel drive systems are typically on all of the time while a four-wheel drive system are activated by either pressing a button in the vehicle or by manipulating a selector lever, typically located near the transmission hump on the floor. In both systems, transfer case fluid keeps the internal parts of the transfer case lubricated. Over time, transfer case fluid will become dirty and break down. When transfer case fluid breaks down you may notice shuddering from the vehicle while turning or a whining noise from the gears in the transfer case.

Common reasons for this to happen:

  • Time: Over time, transfer case fluid will break down and become dirty. Dirty transfer case fluid may cause moving parts in the transfer case to have more difficulty moving, which may cause them to fail.

  • Improper Filling: If the transfer case is not properly filled with transfer case fluid, it may break down more quickly, have difficulty dissipating heat, and keeping parts lubricated.

What to expect:

A top-rated mobile mechanic will come to your home or office and determine whether or not your transfer case fluid needs to be replaced. If it does, he or she will then provide a detailed inspection report outlining the reason the fluid needed to be replaced and the cost of any repairs that may need to be made.

How it's done:

A mechanic will first have your vehicle idle for a few minutes to warm the fluid as warm fluid will drain easier. The mechanic will then drain the old transfer case fluid through the drain plug. The drain plug on most transfer cases is magnetic and picks up metal shavings that otherwise might potentially damage components in the transfer case. The mechanic should clean the drain plug before replacing it. The mechanic will then remove the fill plug and add new fluid. The mechanic should also double-check the amount of fluid, he or she puts in the transfer case, ensuring that it was done properly. A vehicle that is under-lubricated may not dissipate heat or protect critical components as well as a vehicle that is properly lubricated. When the transfer case is full, the mechanic will replace the fill plug and check for any leaks.

How important is this service?

By choosing to not replace your transfer case fluid, you may compromise critical and expensive components inside the transfer case. Because the transfer case is a sealed unit, it is very important that the transfer fluid is filled properly so that heat is appropriately dissipated and components to not suffer from unneeded friction. Repairing a differential can be very expensive, so in order to preserve these components, you should have you transfer case fluid replaced at the correct intervals. Doing so could potentially save you a lot of money down the road.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mitsubishi mechanics

Real customer reviews from Mitsubishi owners like you.

Excellent Rating

(15)

Rating Summary
15
0
0
0
0
15
0
0
0
0

Carlos

28 years of experience
522 reviews
Carlos
28 years of experience
Mitsubishi Raider V6-3.7L - Water Pump Replacement - Moreno Valley, California
Outstanding service

Toby

10 years of experience
100 reviews
Toby
10 years of experience
Mitsubishi Raider V8-4.7L - Oxygen Sensor Replacement (Front/Upper/Upstream, Rear/Lower/Downstream) - Fort Worth, Texas
Toby was on-time a little early even. Was very personable, got right to work inspecting my truck and installing new O2 sensors. I had replaced spark plugs previously and had not reinstalled the baffle for the mass air sensor and Toby took the time to install while finishing up his work.

Emanuel

18 years of experience
81 reviews
Emanuel
18 years of experience
Mitsubishi Raider V6-3.7L - Oil Change - Sugar Land, Texas

Augustine

12 years of experience
129 reviews
Augustine
12 years of experience
Mitsubishi Raider V6-3.7L - Brake Pads Replacement (Front) - Albuquerque, New Mexico
Very knowledgeable and explained in layman's terms what he was doing for the repairs.

Excellent Rating

(15)

Rating Summary
15
0
0
0
0
15
0
0
0
0
Number of Mitsubishi Raider services completed
165+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mitsubishi MECHANICS
700+
experts on our platform

Recent articles & questions

Is It Safe to Drive a Vehicle With a Cracked Windshield?
Your Your car’s windshield is more than just a window to view what’s in front of you - it protects you. Without a windshield, you would be pelted by road debris kicked up by other vehicles, snow and rain, and...
How Long Does a Door Latch Last?
A A door latch is located on every door on your vehicle. It is what keeps the doors shut while you are driving down the road. Each door has two handles, one on the outside and one on the inside....
How to Purchase a Pre-Owned BMW
BMW BMW offers a wide selection of luxury cars. In many circles, owning a BMW is a sign of success. While most balk at the price of a brand new BMC car, pre-owned models provide a viable alternative if you...

What manual transmissions will fit in my car?

Hello. Unfortunately there are really no other transmissions available that will fit into your vehicle and still have everything else work properly. If you tried putting one of the transmissions prior to this one then the axles are not going...

Pcm

Hi there. Your question for replacement cost of your vehicle's PCM (powertrain control module, is difficult to answer (new, remanufactured, used). Typically, the PCM is not a component that fails, and will most likely require programming once replaced. It could...

Turns over but wont start

A no start diagnostic (https://www.yourmechanic.com/services/car-is-not-starting-inspection) would reveal the cause. Try holding the accelerator pedal to the floor and cranking the engine. If the idle air control valve is stuck closed and/or the intake air charge is insufficient, the vehicle should...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com