Mitsubishi Mighty Max Ignition Switch Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(12)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(12)

Ignition Switch Replacement Estimate for Mitsubishi Mighty Max

Mitsubishi Mighty Max Ignition Switch Replacement costs $625 on average.

CarServiceEstimateShop/Dealer Price
1996 Mitsubishi Mighty MaxL4-2.4LService typeIgnition Switch ReplacementEstimate$1166.29Shop/Dealer Price$1445.27 - $2254.29
Show example Mitsubishi Mighty Max Ignition Switch Replacement prices

Ignition Switch Replacement Service

What is the Ignition Switch all about?

The ignition switch, located on the steering column or in the dashboard, takes the power from the battery and directs it to all the accessories and electrical components of your car. It also transfers the power to the starter when you turn the ignition key. If the starter does not receive power from the ignition key, the car will not start. When the ignition switch goes bad, your car may not start and the accessories (lights, radio, etc.) may not work. Replacing an ignition switch can be as simple as removing a few screws to access the ignition switch, or as complicated as removing the whole steering column.

Ignition Switch

Keep in mind:

  • After an ignition switch is replaced, all electrical components should be checked to ensure proper operation.

How it's done:

  • Check the condition of the ignition switch.
  • Remove and replace the ignition switch if it is bad.
  • Verify operation of electrical components.

Our recommendation:

The battery feeds power to ignition switch, so it is important for the ignition system that the battery is in good condition. Don't put too much weight on your key ring because this can damage the key and the tumbler part of the ignition switch. If there is no power inside the car (none of the electrical components are working), have the mechanic inspect the main fuses. If the fuses are good, then the mechanic should inspect the ignition switch and other electrical components.

What common symptoms indicate you may need to replace the Ignition Switch?

  • Car may not start.
  • Car starts then dies.
  • Some electrical components may not work (radio, clock, lights, etc.).

How important is this service?

The ignition switch serves to send power from the battery. When you turn your key to turn on your vehicle, the ignition switch takes power from the battery and sends it to the starter, which allows your vehicle to turn on. When you turn on any electrical components in your vehicle (such as your lights, radio, and air conditioning), the ignition switch draws power from the battery, and sends it to these electrical components to power them. When your ignition switch stops working, your starter and your electrical components have no way of drawing power from your battery. With a faulty ignition switch, you won’t be able to use your radio, lights, or air conditioning, and you won’t be able to turn on your vehicle. In extreme cases, a broken ignition switch won’t allow you to turn your vehicle off, even if you remove the key.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mitsubishi mechanics

Real customer reviews from Mitsubishi owners like you.

Excellent Rating

(12)

Rating Summary
10
0
0
1
1
10
0
0
1
1

Amor

43 years of experience
181 reviews
Amor
43 years of experience
Mitsubishi Mighty Max L4-2.0L - Car is not starting - San Ramon, California
Amor was on time very professional and fixed issue and explained all work to me. I will use again. rich

Grzegorz

41 years of experience
473 reviews
Grzegorz
41 years of experience
Mitsubishi Mighty Max L4-2.0L - Car is not starting - San Francisco, California
He was fine seemed very knowledgeable

Robert

18 years of experience
68 reviews
Robert
18 years of experience
Mitsubishi Mighty Max L4-2.0L - Fuel Pump - Phoenix, Arizona
Came by got the job done!

Theodore

16 years of experience
1526 reviews
Theodore
16 years of experience
Mitsubishi Mighty Max L4-2.6L - Tune-up - Lynnwood, Washington
Quick and gave good advice.

Excellent Rating

(12)

Rating Summary
10
0
0
1
1
10
0
0
1
1
Number of Mitsubishi Mighty Max services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mitsubishi MECHANICS
700+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Fiat 500
The The 2012 Fiat 500 has reentered into the U.S. market after being absent for the past 27 years. The Fiat 500 is sportier than the Mini Cooper, yet a step above the Toyota Yaris. When compared to the Cooper,...
How to Buy a Good Quality Car Fan
If If you live in a city/town that is known for its hot climate, then sometimes the air conditioner in your car just isn’t enough on those long drives. If you need a little extra help circulating the air a...
Symptoms of a Bad or Failing Door Lock Relay
If the power door locks function intermittently or do not work at all, you may need to replace the door lock relay.

Car doesn't start and brakes not working.

Battery's over time especially in cold climate loses their ability to charge and they need to be tested. I would have a technician, such as one from YourMechanic, test the battery to make sure it has plenty of cranking amps....

Squeaking noise comes from wheels as it spins.

If the noise does not exist with the vehicle stopped (i.e., due to engine noise), then it is likely due to wheel bearings or the brakes. If brake related, unfortunately these sorts of noises can be related to the use...

Where is the output speed sensor on a 2001 BMW 330 i

The output shaft and input shaft transmission speed sensors are inside the transmission pan. The output sensor is near rear of pan and input is near front of pan on transmission. The pan needs to be removed for access to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com