Mitsubishi Eclipse Cross Serpentine/Drive Belt Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(64)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(64)

Serpentine/Drive Belt Replacement Service

How much does a Serpentine/Drive Belt Replacement cost?

On average, the cost for a Mitsubishi Eclipse Cross Serpentine/Drive Belt Replacement is $144 with $50 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Mitsubishi Eclipse CrossL4-1.5L TurboService typeSerpentine/Drive Belt ReplacementEstimate$213.99Shop/Dealer Price$248.74 - $330.49
Show example Mitsubishi Eclipse Cross Serpentine/Drive Belt Replacement prices

What is a serpentine belt and how does it work?

A serpentine belt is a relatively long, flat, multi-ribbed belt that is driven by the engine’s crankshaft pulley. The belt drives many, and often all, of the engine accessories such as the alternator, air conditioning compressor, power steering pump, water pump, and air pump. The serpentine belt is tensioned by a hydraulic or spring-loaded automatic tensioner. Some older cars use a serpentine belt to drive most accessories but will also have a shorter v-style belt to drive, for example, the power steering pump.

Belts

When to consider replacing the serpentine belt:

  • Regularly scheduled maintenance. Typically, belt manufacturers recommend belt replacement at 90,000 miles. However, the belt must be inspected for wear or damage at regular intervals prior to this high mileage.
  • Squealing noise, belt slippage, visible belt damage. Should the belt fail or wear out prematurely, you may hear noise or you may see visible signs of deterioration such as missing chunks of rubber, excessive cracking, or a shredded appearance on the edge of the belt.
  • Battery Light. A loose belt, perhaps caused by a defective tensioner, may not drive the alternator at adequate speed and thus the battery may discharge, causing the warning light to illuminate.
  • Engine overheating. Often, the serpentine belt drives the water pump. In those applications, if the belt breaks the engine will overheat in seconds to minutes. If the belt is inadequately tensioned, you may notice higher-than-normal engine operating temperature.

How do mechanics replace the serpentine belt?

  • Prior to removing the belt, the mechanic must run the engine to determine if the idler pulley and the belt tensioner are noise-free. Those rotating components have grease filled bearings and are subject to wear. In addition, the mechanic will ensure that all pulleys and accessories are turning in the same plane. These steps help make sure your new belt will operate trouble-free for its full-service life.
  • The belt’s routing path through the various components is noted. The belt tensioner is released, usually with a wrench or lever, to release the tension from the belt. With the tension off, the belt slides off the pulleys.
  • All rotating components — that is the alternator, air conditioner compressor, etc. — are checked for smooth operation and no noise.
  • If everything checks out, the new belt is slipped over all of the pulleys while holding the tensioner away from the belt. Once the belt is centered on all pulleys, the tensioner is released and the installation is complete. The engine is run to ensure normal operation.

Is it safe to drive with a serpentine belt problem?

No. Should the belt have visible damage, you risk unexpected and sudden breakage that could potentially leave you stranded. Serpentine belt problems that result in the alternator not charging may cause the battery to discharge, which will result in loss of electrical power to the vehicle. Additionally, if a deteriorated belt breaks and that belt drives the water pump, the engine will overheat in a matter of seconds.

When replacing the serpentine belt keep in mind:

  • On many cars, the expected service life of a serpentine belt is around 90,000 miles. Should the belt fail well prior to that, a very careful inspection should be performed to check for out-of-alignment pulleys, a possibly out-of-position crankshaft harmonic balancer on which the drive pulley is mounted, binding pulleys, or a defective belt tensioner.
  • Attention should always be given to serpentine belt routing, since proper routing is critical to proper belt tension, and function of the driven components.
  • Sometimes it is difficult to distinguish serpentine belt related noise from other engine noises. In these cases, a mechanic will determine the origin of the noise by momentarily running the engine without the serpentine belt attached.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mitsubishi mechanics

Real customer reviews from Mitsubishi owners like you.

Excellent Rating

(64)

Rating Summary
61
2
0
1
0
61
2
0
1
0

Jamahl

20 years of experience
830 reviews
Jamahl
20 years of experience
Mitsubishi Galant L4-2.4L - Serpentine/Drive Belt - Orlando, Florida
Very knowledgeable and professional

Anthony

36 years of experience
82 reviews
Anthony
36 years of experience
Mitsubishi Endeavor V6-3.8L - Serpentine/Drive Belt - Tomball, Texas
It really took Anthony a long time to take out the socket screws from the front rotors. And Anthony insisted to finish his job on time. Really appreciate it. Will definitely recommend him to my friends.

Edwin

39 years of experience
7 reviews
Edwin
39 years of experience
Mitsubishi Outlander L4-2.4L - Serpentine/Drive Belt - Palo Alto, California
Edwin did a great job!

Andrew

23 years of experience
169 reviews
Andrew
23 years of experience
Mitsubishi Galant V6-3.0L - Serpentine/Drive Belt - Dallas, Texas
Super service! On time! Professional but friendly! Finished sooner that the estimated time! Really nice guy and this service helped me be more productive since I didn't have to leave work early to go somewhere or do it myself all day on the weekend. Thank you Andrew!!

Excellent Rating

(64)

Rating Summary
61
2
0
1
0
61
2
0
1
0
Number of Mitsubishi Serpentine/Drive Belt Replacement services completed
704+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mitsubishi MECHANICS
700+
experts on our platform

Recent articles & questions

Disabled Driver Laws and Permits in Massachusetts
Every Every state has its own unique rules and guidelines for disabled drivers. It is important that you familiarize yourself with the laws not only for the state in which you live, but for any states that you might visit...
How Much Does a Mechanic Make in Ohio?
Automotive technician jobs in Ohio have an average salary of $37k, and the state industry is growing rapidly.
How to Troubleshoot a Car That Has Extra Bounce or Sway
Bounce or sway while driving a car can be caused by faulty struts, shocks, or worn out tires. Check and inflate car tires to begin the diagnosis.

Will a home code reader/scanner let me fix my car?

Aftermarket code readers and scanners cannot, by themselves, be used to fix your car. The scanner is used to retrieve diagnostic trouble codes (DTCs) from the various control modules on the vehicle. After using your scanner to retrieve DTCs (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection),...

No injector pulse but does spark.

Hello There, You are correct in that if the crankshaft position sensor or the pickup coil were bad there would likely not be any spark to the plugs. In relation to your no injector pulse problem, check the wiring harness...

High mileage and oil grade.

The oil that the manufacturer recommends is 5w30 and it is the only oil that you should use. If you try to use a thicker 10w30 or 10w40 then you may be not lubricating the engine good enough. The thicker...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com