Mini Cooper Clubman Car pulls in one direction Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(8)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(8)

Car pulls in one direction Inspection Service

How much does a Car pulls in one direction Inspection cost?

On average, the cost for a Mini Cooper Clubman Car pulls in one direction Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2021 Mini Cooper ClubmanL3-1.5L TurboService typeCar pulls in one direction InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2019 Mini Cooper ClubmanL4-2.0L TurboService typeCar pulls in one direction InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2016 Mini Cooper ClubmanL4-2.0L TurboService typeCar pulls in one direction InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2018 Mini Cooper ClubmanL3-1.5L TurboService typeCar pulls in one direction InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2017 Mini Cooper ClubmanL3-1.5L TurboService typeCar pulls in one direction InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2017 Mini Cooper ClubmanL4-2.0L TurboService typeCar pulls in one direction InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2020 Mini Cooper ClubmanL3-1.5L TurboService typeCar pulls in one direction InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2018 Mini Cooper ClubmanL4-2.0L TurboService typeCar pulls in one direction InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Mini Cooper Clubman Car pulls in one direction Inspection prices

Driving a car that pulls to one side is not only inconvenient, but it is also very dangerous. Maintaining constant pressure on the steering wheel to keep the car going straight is tiring and can pull your focus off the road. Plus, it can be very hard on your tires.

A pull to one side can be caused by a wide variety of issues -- everything from an underinflated tire to failed suspension parts.

Common reasons for this to happen:

Uneven Tire Pressure

Uneven tire pressure is a very common reason for a car to pull to one side. Lower pressure on one side changes the height of the tire, which causes the alignment to change. This is especially true if you have an underinflated rear tire. If the tire is underinflated, it will have increased rolling resistance which will make the pull to one side much more noticeable.

Over inflated tires are just as bad. This condition will also cause the alignment to change. An overinflated tire will cause the vehicle to push away from that tire, also creating abnormal tire wear.

You can see this in two ways:

  • An underinflated tire will show wear on the outer edges.
  • An overinflated tire will show wear down the center of the tire.

This is an easy fix: head to the local gas station and inflate all tires to their proper pressure. Tire pressure stipulations can usually be found on the driver’s side door jam. The optimal pressure is on a sticker. After you have inflated the tires back to their specifications, drive the vehicle to verify the pull is now gone.

Wheel Alignment

Another common cause of a car pulling to the side is a wheel that is out of alignment. Another symptom of misaligned wheels is uneven tread wear. Out-of-alignment wheels will quickly wear down and can lead to more serious issues if not addressed. You should have your vehicle aligned as soon as possible if this is the root cause of the pulling.

Alignment is not an adjustment of the wheels or tires, but of the suspension. A mechanic will adjust the suspension so that the angle of the tires is optimized and the tires make contact with the road according to the manufacturer specifications.

Brake Issues: Stuck Caliper, Collapsed Brake Hose, Unlubricated Slide Pins

Issues with the brake system can cause a vehicle to pull to one side. One of the most common brake issues is a stuck caliper. Brake calipers are powered by the hydraulic brake system and apply pressure to the brake pads to bring the car to a stop. If one of the calipers is stuck, the car will pull to that side.

Other brake issues that cause a car to pull include a collapsed brake hose, or slide pins that are in need of lubrication. Brake issues should be dealt with by a professional, as the braking system is a critical safety component of your car.

Bad Wheel Bearing

If you have a bad wheel bearing, there will probably be more serious symptoms present, but pulling to one side is also a warning sign.

Wheel bearings allow the friction-free rotation of the wheel hub assembly, providing smooth wheel rotation.

There are four wheel bearings on a vehicle, one at each wheel. When a wheel bearing wears out you will hear a grinding noise from the tire area, the steering wheel will sometimes shake, and the car will possibly pull to one side if it is starting to seize. This latter symptom often occurs long after you start hearing the grinding noise.

You should not drive your vehicle in this condition. Contact a mechanic immediately. Replacing a wheel bearing is a complicated repair and should be done by a professional.

Worn Suspension Components

At some point in your vehicle’s lifetime, most of the suspension will need replacing. Whether it is shocks or struts, ball joints, control arms or bushings, all the components wear out over time. As they become worn, they will often shift or lean to one side, especially during braking, which causes the car to pull to that side.

For example, a worn-out control arm bushing will shift when the brakes are applied, causing the vehicle to pull sharply to that side. Suspension parts tend to wear out slowly, so it is possible that you may not notice until they actually break.

The suspension is a key component of your car’s safety system and you should not drive it with broken or worn parts. An annual inspection of your suspension can help avoid surprises.

Worn Steering Linkage

A weak tie rod end will cause the steering wheel to shift to one side or the other while turning. If it gets extremely bad, the steering wheel could shake violently from side to side. Newer vehicles use a rack-and-pinion system that can sometimes be serviced. Older vehicles use a steering box and linkage system that is serviceable.

A broken or severely damaged steering linkage is extremely dangerous, as it could result in loss of control of the steering wheel. If you suspect any of these symptoms, have your car checked by a mechanic.

Torque Steer

Torque steer is when the car pulls to one side as the car initially accelerates. There can be several causes of this condition. Sometimes, loose steering components are the culprit. Other times, a broken motor mount is the cause. Too much slack in a tie rod, a failing lower control-arm bushing, or a ball joint with excess movement can all cause this problem.

You can test for this problem by putting your car in neutral and coasting it down the street. If the pull does not happen when coasting, your alignment is probably not the problem and torque steer could be the source of the issue.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the cause and source of the pulling issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A car is not safe to operate under conditions where it is pulling to one side. Regardless of whether it is a brake issue, suspension issue, or a bad wheel bearing, these repairs require the expertise of a professional. Book a mechanic to perform a thorough inspection as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mini mechanics

Real customer reviews from Mini owners like you.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0

Chuck

10 years of experience
347 reviews
Chuck
10 years of experience
Mini Cooper Clubman L4-2.0L Turbo - Battery - McKinney, Texas
Incredible service

Manuel

32 years of experience
580 reviews
Manuel
32 years of experience
Mini Cooper Clubman L3-1.5L Turbo - Oil Change - Long Beach, California
Very pleasant.

Luis

18 years of experience
320 reviews
Luis
18 years of experience
Mini Cooper Clubman L3-1.5L Turbo - Battery - Westfield, New Jersey
On time and very nice

Albert

15 years of experience
46 reviews
Albert
15 years of experience
Mini Cooper Clubman L4-2.0L Turbo - Whining sound when car is in gear Inspection - Corona, California
Albert was very knowledgeable and professional. All round a good guy and knows what he’s talking about

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0
Number of Mini Cooper Clubman services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mini MECHANICS
400+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Honda Pilot
If If you’re in the market for a larger SUV, you might think that you have to resign yourself to a gas-guzzling monster like a Suburban or a Chevy Tahoe, but that’s really not the case. With the 2012 Honda...
P0409 OBD-II Trouble Code: Exhaust Gas Recirculation Sensor "A" Circuit
P0409 P0409 code definition P0409 is a generic OBD2 diagnostic trouble code pointing to an issue with the exhaust gas recirculation circuit. This code may be seen with other EGR codes. What the P0409 code means The P0409 code is...
The Car Buying Habits of Gen Z Drivers
Car ownership is important for Generation Z drivers and they value safety and practicality as well as technology and freedom.

Occasional shaking and loss of engine power

Unfortunately, I don't have repair information for this vehicle yet. I've seen online that other people have experienced a similar problem accompanied by a Check Engine Light and code P0606 (https://www.yourmechanic.com/article/p0606-obd-ii-trouble-code-pcm-processor-fault-by-jamahl-walker), which stands for Fuel Pump Control Module. The solution...

Car is overheating everytime i drive it for about 15-20 minz

Hello there, many faults will cause your 2004 Cadillac SRX to overheat after driving for 15-20 minutes. When head gaskets fail the most common signs are the coolant level dropping without visible leaks, white smoke from the tail pipe, and...

Want to pass emissions testing, but I have a P0400 code for my vehicle. 2000 Nissan Altima

Hi there - the P0400 (https://www.yourmechanic.com/article/p0400-obd-ii-trouble-code-exhaust-gas-recirculation-flow-malfunction-by-jay-safford) code you have suggests a problem with the Exhaust Gas Recirculation system of your car. Given your mileage, this malfunction could be a clogged EGR valve or tube, solenoid or leaking exhaust gas tube....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com