Mercury Villager Brake pads are wearing out quickly Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(65)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(65)

Brake pads are wearing out quickly Inspection Service

How much does a Brake pads are wearing out quickly Inspection cost?

On average, the cost for a Mercury Villager Brake pads are wearing out quickly Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2000 Mercury VillagerV6-3.3LService typeBrake pads are wearing out quickly InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1967 Mercury VillagerV8-6.4LService typeBrake pads are wearing out quickly InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1967 Mercury VillagerV8-4.7LService typeBrake pads are wearing out quickly InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1966 Mercury VillagerL6-2.8LService typeBrake pads are wearing out quickly InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1998 Mercury VillagerV6-3.0LService typeBrake pads are wearing out quickly InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1963 Mercury VillagerV8-3.6LService typeBrake pads are wearing out quickly InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1964 Mercury VillagerV8-7.0LService typeBrake pads are wearing out quickly InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1965 Mercury VillagerV8-7.0LService typeBrake pads are wearing out quickly InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Mercury Villager Brake pads are wearing out quickly Inspection prices

Modern disc brakes are far superior to older drum brakes in many ways. They offer better stopping power, and can be equipped with antilock technology to enhance your safety. However, they do have a few drawbacks. One of those is that pads wear out more quickly than shoes (pads are used on disc brakes, while shoes are used with drum brakes). With that being said, if you’re experiencing unusually fast brake pad wear, there could be a problem.

How this system works:

Your brake pads are the point where all the action happens with your system. They’re prone to wear and tear through normal operation. Understanding how disc brakes work isn’t all that hard, and the basics of the system are pretty simple.

A standard disc brake setup consists of a caliper, two brake pads and a rotor (per wheel). Fluid is sent to the caliper from the master cylinder when you press the brake pedal. A piston inside the caliper is activated, and the caliper then squeezes the rotor between the inner and outer brake pad. This slows down your car. It also creates friction, heat and lots of wear on the material of the brake pad.

Over time, brake pads wear out. That’s only natural. You have to replace them periodically. The exact frequency will depend on your driving style and habits. For instance, if you do a lot of stop-and-go driving, you can expect your pads to wear out much faster than a driver who does mostly highway or interstate driving.

With that being said, if you’re noticing abnormally fast brake wear, there could be some issues.

Common reasons for this to happen:

  • Driver Error: The single most common cause of abnormally fast brake wear is driver error. This is most usually seen with “two-footed” drivers who use their right foot to work the gas and their left to work the brake. These drivers tend to leave their left foot resting ever so slightly on the brake pedal. Understand that ANY pressure on the pedal engages the brakes. So, even a small amount of pressure on the corner of the pedal is enough to put the pads in contact with the rotor while the car is moving. This eats through pads very quickly. It’s also generally accompanied by “bluing” of the rotors, which is a sign of overheating.

  • Corroded Slide Pins: The caliper must be able to slide smoothly and evenly at all times. If the slide pins are corroded (most common on old cars, or flood-damaged vehicles), the caliper may not slide out evenly, leaving it sitting slightly off center. This keeps part of the pad in contact with the rotor at all times and will result in premature pad replacement.

  • Abnormal Rotor Wear: In a normal brake system, the surface of the rotor should be smooth, and both sides should be an equal thickness. However, if the rotors are worn, grooved, pitted, burnt or have seen significant wear (and are now in need of replacement), they can create rapid pad wear. It can also cause brake pads to crack, wear strangely (grooving) and other problems.

  • Using Cheap Pads: You’ll find replacement pads available for a wide range of prices, and the natural inclination is often to go for the lower priced option. However, cheap pads generally don’t wear very long. In addition, some very cheap pads can contain chunks of metal that will eat into your rotors. Avoid low-quality pads, even if it means paying a little more.

  • Torn Piston Seal: Pistons are operated by brake fluid, but if the seal is broken, fluid will leak out. Additionally, the piston will not be able to return to its starting position completely, maintaining some degree of contact between the pads and the rotor, accelerating wear significantly.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect the entire braking system, including the seals, pads, rotors, calipers, pistons, slide pins and more. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will visually inspect the disc brakes to verify both their condition and system operation. This will include the lines, the calipers, the pistons, brake pads, rotors and more. It may be necessary to jack the car up in order to remove the wheels for a full inspection of the system.

How important is this service?

If your brake pads are wearing out prematurely, it can be expensive, frustrating and dangerous. Without reliable brakes, your car is not safe to drive. Your brakes should be inspected during routine maintenance, and you should be aware of their condition at all times. One of our professional mechanics can inspect your brake system and advise you on what needs to be done to repair the issue.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercury mechanics

Real customer reviews from Mercury owners like you.

Excellent Rating

(65)

Rating Summary
58
2
1
1
3
58
2
1
1
3

Vytas

8 years of experience
62 reviews
Vytas
8 years of experience
Mercury Villager V6-3.0L - Tune-up - Streamwood, Illinois
Great mechanic! Honest, respectful and kind! He's knowledgeable, professional and patient. He answered all of my questions and respectfully addressed my concerns regarding my vehicle (vehicle wouldn't, dead battery, engine light). I thought that it was the alternator but he explained why I didn't need an alternator (no charge for the alternator). He found a parasitic drain on my battery (resistors/engine light) that led to the dead battery. Thank you for your patience and service to my vehicle! You're MY mechanic now!

Alex

22 years of experience
112 reviews
Alex
22 years of experience
Mercury Villager V6-3.0L - Brake Pads Replacement (Front) - Mesa, Arizona
Very good and fast.

Jay

37 years of experience
967 reviews
Jay
37 years of experience
Mercury Villager V6-3.3L - Car is overheating - Ontario, California
It was great finding your website. Having a Professional, organized, and dependable service like yours is great, so convenient and most importantly reliable.

Mike

26 years of experience
175 reviews
Mike
26 years of experience
Mercury Villager V6-3.3L - Car is hard to start - New Boston, Michigan
Found issues with previous owner's repairs and fixed.

Excellent Rating

(65)

Rating Summary
58
2
1
1
3
58
2
1
1
3
Number of Mercury Villager services completed
715+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercury MECHANICS
600+
experts on our platform

Recent articles & questions

P0003 OBD-II Trouble Code: Fuel Volume Regulator Control Circuit Low
P0003 P0003 trouble code definition The P0003 code is associated with the electrical circuit which connects to your fuel pressure regulator. It also may be related to other codes, such as: P0001, P0002, or P0004. What the P0003 code means...
What Does it Mean for a Car to be Reliable?
We We live in really stressful times. Domestically, there is uncertainty about our political future, and overseas can be a dangerous place to travel. In times like these, it’s natural for people to gravitate toward things that are reliable and...
P2311 OBD-II Trouble Code: Ignition Coil D Secondary Circuit
P2311 P2311 code definition Ignition Coil D Secondary Circuit What the P2311 code means P2311 is an OBD-II generic code for the engine control module (ECM) (https://www.yourmechanic.com/article/what-is-a-vehicle-s-electrical-control-unit) detecting ignition that coil D or the cylinder 4 secondary circuit has low...

ABS Light, car shakes while braking

Usually when the ABS light is on the dashboard it's caused by a faulty wheel speed sensor (https://www.yourmechanic.com/services/wheel-speed-sensor-replacement), ABS module, or low brake fluid levels (https://www.yourmechanic.com/services/brake-fluid-is-leaking-inspection). The fact that the car shakes when you apply the brakes at 60 mph...

Replace Brake Pads with Brake Rotors?

It is recommended t replace pads with the new rotors. The old rotors would of put grooves in the pads and caused them to not be flat anymore. If you decide to use the existing pads then you should sand...

Replaced [alternator](/topics-alternator-ford/) then charged battery and truck will run for 10 minutes or so then shuts off and only clicking when I turn the key

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com