Mercury Mountaineer Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(3)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(3)

Car Thermostat Replacement Estimate for Mercury Mountaineer

Mercury Mountaineer Car Thermostat Replacement costs $168 on average.

CarServiceEstimateShop/Dealer Price
2006 Mercury MountaineerV6-4.0LService typeCar Thermostat ReplacementEstimate$270.33Shop/Dealer Price$325.32 - $462.37
1998 Mercury MountaineerV8-5.0LService typeCar Thermostat ReplacementEstimate$207.75Shop/Dealer Price$252.11 - $357.24
2000 Mercury MountaineerV6-4.0LService typeCar Thermostat ReplacementEstimate$250.33Shop/Dealer Price$305.33 - $442.40
2004 Mercury MountaineerV6-4.0LService typeCar Thermostat ReplacementEstimate$250.33Shop/Dealer Price$305.31 - $442.36
2001 Mercury MountaineerV8-5.0LService typeCar Thermostat ReplacementEstimate$202.05Shop/Dealer Price$245.00 - $345.87
2005 Mercury MountaineerV8-4.6LService typeCar Thermostat ReplacementEstimate$240.75Shop/Dealer Price$293.36 - $423.24
1997 Mercury MountaineerV8-5.0LService typeCar Thermostat ReplacementEstimate$212.75Shop/Dealer Price$256.97 - $362.00
2005 Mercury MountaineerV6-4.0LService typeCar Thermostat ReplacementEstimate$255.33Shop/Dealer Price$310.57 - $447.82
Show example Mercury Mountaineer Car Thermostat Replacement prices

Car Thermostat Replacement Service

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercury mechanics

Real customer reviews from Mercury owners like you.

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0
Number of Mercury Mountaineer Thermostat Replacement services completed
33+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercury MECHANICS
600+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Fit EV
The The 2012 Honda Fit EV is lots of fun to drive and offers a smooth ride to passengers. It is Honda’s first pure electric car, and it offers a range of 70 to 123 miles between charges. The Fit...
How to Remove, Install, and Adjust Ignition Timing
Ignition distributors help spark the gas and air in the engine. Worn distributors need to be removed to be cleaned to maintain proper ignition timing.
Top 10 Hacks for Cleaning and Organizing Your Car
Keeping your car clean and organized makes driving more enjoyable and safer. Use baking soda and household items to maintain a clean car.

Coolant leak but not sure from where.

Hello, the only way to find a coolant leak is to use a coolant system pressure tester and then inspect for leaks. A coolant system pressure tester has an attachment that replaces the radiator cap and is attached to a...

Will a 2002 transmission fit into a 2007

Hello there, a transmission from a 2000 Nissan Xterra will not fit into your 2007 Nissan Xterra. The automatic transmission from the 2000 model is a 4 speed unit, where as the 2007 is a 5 speed transmission that is...

it has now been 4 days since i asked the question . if you dont know the answer just say so

Hi there. Over the past few weeks, we've had a few glitches with our Q & A section, which caused quite a back up on our ability to answer questions. As of today, we are caught up. You should have...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com