Mercury Montego Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(23)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(23)

Car Battery Replacement Estimate for Mercury Montego

Mercury Montego Car Battery Replacement costs $252 on average.

CarServiceEstimateShop/Dealer Price
1971 Mercury MontegoV8-5.8LService typeCar Battery ReplacementEstimate$419.99Shop/Dealer Price$512.39 - $761.69
1974 Mercury MontegoV8-7.5LService typeCar Battery ReplacementEstimate$399.99Shop/Dealer Price$492.41 - $741.72
1972 Mercury MontegoL6-4.1LService typeCar Battery ReplacementEstimate$399.99Shop/Dealer Price$492.41 - $741.72
1970 Mercury MontegoV8-5.8LService typeCar Battery ReplacementEstimate$399.99Shop/Dealer Price$492.39 - $741.68
1971 Mercury MontegoV8-5.0LService typeCar Battery ReplacementEstimate$399.99Shop/Dealer Price$492.42 - $741.75
1973 Mercury MontegoL6-4.1LService typeCar Battery ReplacementEstimate$399.99Shop/Dealer Price$492.41 - $741.72
1973 Mercury MontegoV8-5.8LService typeCar Battery ReplacementEstimate$404.99Shop/Dealer Price$497.27 - $746.48
1973 Mercury MontegoV8-5.0LService typeCar Battery ReplacementEstimate$404.99Shop/Dealer Price$497.64 - $747.14
Show example Mercury Montego Car Battery Replacement prices

Car Battery Replacement Service

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercury mechanics

Real customer reviews from Mercury owners like you.

Excellent Rating

(23)

Rating Summary
23
0
0
0
0
23
0
0
0
0

Simon

27 years of experience
260 reviews
Simon
27 years of experience
Mercury Montego V6-3.0L - Serpentine/Drive Belt Replacement - Silver Spring, Maryland
Was on time, very polite, did a excellent job. I would recommend simon again

Andrew

15 years of experience
475 reviews
Andrew
15 years of experience
Mercury Montego V6-3.0L - Clicking or popping sound is coming from wheels - Vancouver, Washington
Great guy, very friendly with lots of knowledge.

Roger

15 years of experience
55 reviews
Roger
15 years of experience
Mercury Montego V6-3.0L - Oil Change - Austin, Texas

Michael

4 years of experience
202 reviews
Michael
4 years of experience
Mercury Montego V6-3.0L - Car is not starting - Fishers, Indiana
He took the time to check everything and followed protocol well. Michael was also willing to explain and answer our questions!

Excellent Rating

(23)

Rating Summary
23
0
0
0
0
23
0
0
0
0
Number of Mercury Montego services completed
253+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercury MECHANICS
600+
experts on our platform

Recent articles & questions

Is It Safe to Drive With a Diesel Leak?
While While diesel engines aren’t as popular in the US as they are in the UK and Europe, they do have their adherents, most notably in the heavy-duty truck sector. Diesel systems are very different from their gasoline counterparts, and...
P2571 OBD-II Trouble Code: Direct Ozone Reduction Catalyst Temperature Sensor Circuit 4 Intermittent/Erratic
P2571 P2571 code definition A P2571 trouble code indicates that the Powertrain Control Module (PCM) has detected higher-than-normal voltage from the direct control ozone reduction catalyst temperature sensor. Other related trouble codes include P2567, P2568, P2569, P2570, P2572, P2573,...
P0249 OBD-II Trouble Code: Turbocharger Wastegate Solenoid B Low
P0249 P0249 code definition The P0249 code indicates that the PCM is detecting an abnormal reading coming from the turbocharger wastegate solenoid “B” circuit. What the P0249 code means Circuit B is a specific wastegate solenoid wherein multiple solenoids...

Just put on new throttle body now when start car idles fine but as warms up idle starts surging and bouncing up and down

First you need to check all the air hoses and vacuum lines. Any air that enters the engine without passing through the throttle body will make it behave badly. Then I suggest you disconnect the battery for a few minutes...

I have a 2014 Ford Fusion my car starts up and shifts into any gear but doesn't move at all, what could be the issue please help ?

Your car is pretty new for a transmission failure, but that's about where your description points. But before jumping to conclusions though, it should be carefully checked out. It could be a failure in the electronics that control the transmission,...

2016 Jeep renegade with engine surge & software update flash pcm&tcm to match software but is slight pull and jerking normal after

Hi Alex. Thanks for sending us the question tonight. It's actually a very good question. If the dealership has inspected the vehicle and determined that the symptoms you're experiencing are caused by a computer or software glitch, a reset or...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com