Mercury Grand Marquis Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(13)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(13)

Brake Pad Replacement Estimate for Mercury Grand Marquis

Mercury Grand Marquis Brake Pad Replacement costs $188 on average.

CarServiceEstimateShop/Dealer Price
1983 Mercury Grand MarquisV8-5.8LService typeBrake Pads - Rear ReplacementEstimate$336.58Shop/Dealer Price$398.05 - $532.25
1985 Mercury Grand MarquisV8-5.0LService typeBrake Pads - Rear ReplacementEstimate$228.99Shop/Dealer Price$274.86 - $370.59
1984 Mercury Grand MarquisV8-5.8LService typeBrake Pads - Rear ReplacementEstimate$300.58Shop/Dealer Price$362.08 - $496.30
1989 Mercury Grand MarquisV8-5.0LService typeBrake Pads - Front ReplacementEstimate$243.03Shop/Dealer Price$294.66 - $416.10
1975 Mercury Grand MarquisV8-6.6LService typeBrake Pads - Rear ReplacementEstimate$245.31Shop/Dealer Price$299.07 - $432.39
1976 Mercury Grand MarquisV8-7.5LService typeBrake Pads - Front ReplacementEstimate$245.31Shop/Dealer Price$299.06 - $432.36
2006 Mercury Grand MarquisV8-4.6LService typeBrake Pads - Front ReplacementEstimate$232.03Shop/Dealer Price$281.07 - $400.56
2007 Mercury Grand MarquisV8-4.6LService typeBrake Pads - Front ReplacementEstimate$232.03Shop/Dealer Price$281.44 - $401.22
Show example Mercury Grand Marquis Brake Pad Replacement prices

Brake Pad Replacement Service

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercury mechanics

Real customer reviews from Mercury owners like you.

Excellent Rating

(13)

Rating Summary
13
0
0
0
0
13
0
0
0
0

Chris

10 years of experience
31 reviews
Chris
10 years of experience
Grand Marquis 2002 - Brake Pads - Salt Lake City, UT
Very thorough. Nice guy, does good work.

LAVELL

26 years of experience
129 reviews
LAVELL
26 years of experience
Grand Marquis 2001 - Brake Pads - Oakland, CA
He's absolutely great. I got home a bit later than I thought but he was there and ready.

Chris

10 years of experience
31 reviews
Chris
10 years of experience
Grand Marquis 2002 - Tie Rod End - Salt Lake City, UT
Doesn't leave work unfinished, in my case he had to go get a part and a specific tool to finish thhe job.

Jason

0 years of experience
417 reviews
Jason
0 years of experience
Grand Marquis 2001 - Air Spring Bag - Phoenix, AZ
came and took care of problem great guy

Excellent Rating

(13)

Rating Summary
13
0
0
0
0
13
0
0
0
0
Number of Mercury Grand Marquis Brake Pads Replacement services completed
143+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercury MECHANICS
600+
experts on our platform

Recent articles & questions

What Gases Does the OBD Detect in the Exhaust?
Your Your engine runs on combustion – fire – which creates exhaust gases. A wide range of gases are produced during normal operation, and they must be controlled because many of them become pollutants when released into the atmosphere. It’s...
How to Buy a Good Quality Carburetor
Vehicles Vehicles are now manufactured using a fuel injection system in order to provide the engine with the proper fuel-air mixture. Prior to the 1980s, however, carburetors performed this task. The carburetor is similar to a throttle body in that...
10 Best Stores to Buy Auto Parts in Modesto, California
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in Modesto is O’Reilly Auto Parts.

Rough idle and intermittent engine light on

Hello there, many faults can cause a rough idle and the Check Engine Light to be on with your 2007 Mazda 3. The first course of action would be to check what code is stored in the ECU. This code...

Engine Light and AT light. Car goes into limp mode

Hello. Most of the time this is the result of a transmission failure. It is common for this transmission to have internal pressure problem which will cause these codes. It can also be a voltage problem so I always check...

Car shaking during start up while it is cold outside

You will need to make sure you are using the correct oil viscosity for the temperature outside. If you use the incorrect oil it may cause the VVT system to not work correctly and cause erratic running if one or...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com