Mercury Capri Distributor Cap and Rotor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(11)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(11)

Distributor Cap and Rotor Replacement Service

How much does a Distributor Cap and Rotor Replacement cost?

On average, the cost for a Mercury Capri Distributor Cap and Rotor Replacement is $165 with $25 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Mercury CapriL4-1.6L TurboService typeDistributor Cap and Rotor ReplacementEstimate$269.16Shop/Dealer Price$301.30 - $389.62
1993 Mercury CapriL4-1.6LService typeDistributor Cap and Rotor ReplacementEstimate$242.09Shop/Dealer Price$267.95 - $341.40
1991 Mercury CapriL4-1.6LService typeDistributor Cap and Rotor ReplacementEstimate$242.09Shop/Dealer Price$267.97 - $341.44
1992 Mercury CapriL4-1.6L TurboService typeDistributor Cap and Rotor ReplacementEstimate$260.15Shop/Dealer Price$290.55 - $377.56
1993 Mercury CapriL4-1.6L TurboService typeDistributor Cap and Rotor ReplacementEstimate$260.15Shop/Dealer Price$292.02 - $380.14
1994 Mercury CapriL4-1.6LService typeDistributor Cap and Rotor ReplacementEstimate$242.09Shop/Dealer Price$268.11 - $341.69
1992 Mercury CapriL4-1.6LService typeDistributor Cap and Rotor ReplacementEstimate$242.09Shop/Dealer Price$267.99 - $341.47
1994 Mercury CapriL4-1.6L TurboService typeDistributor Cap and Rotor ReplacementEstimate$260.15Shop/Dealer Price$290.55 - $377.56
Show example Mercury Capri Distributor Cap and Rotor Replacement prices

What are the Distributor Rotor and Cap all about?

When the engine is running, high voltage created by the ignition coil travels through the coil wire to the ignition rotor. As the ignition rotor turns in the distributor, the rotor distributes the spark by sending it in a synchronized order through the spark plug wires to the spark plug located in each of the engine's cylinders.

The distributor is a main component of the ignition system. It takes very high voltage and delivers it to fire the spark plugs.

Keep in mind:

  • When the distributor rotor and cap are replaced, the entire ignition system should be inspected.
  • After replacing the distributor rotor and cap, the ignition wires will need to be reinstalled.

How it's done:

  • Check the ignition system.
  • Replace the cap and rotor if found faulty.
  • Re-check the ignition system.
  • Check ignition timing if needed.

Our recommendation:

Whenever your vehicle has routine maintenance or servicing, the ignition system should be inspected thoroughly. If you ever notice your ignition system having a hard time (such as your car having trouble turning on or staying on), then you should schedule an inspection.

What common symptoms indicate you may need to replace the Distributor Rotor and Cap?

  • Engine misfires.
  • Car does not start.
  • Noises from the engine.
  • Check engine light is on.

How important is this service?

The distributor rotor and cap is used when the engine is running. During this time, high voltage is created by the ignition coil, and sent through the coil wire to the ignition rotor. This rotor turns inside the distributor, and as it does so, it evenly distributes sparks to the spark plugs, through the spark plug wires. The spark plugs then use this spark to ignite the fuel mixture, which allows the engine to keep running.

If the distributor rotor and cap malfunction, the voltage from the ignition coil won’t be redistributed to the spark plugs, and your engine will either have a hard time running, or won’t run at all.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercury mechanics

Real customer reviews from Mercury owners like you.

Excellent Rating

(11)

Rating Summary
11
0
0
0
0
11
0
0
0
0

Glenn

15 years of experience
62 reviews
Glenn
15 years of experience
Capri 1993 - Clutch Master Cylinder - Alexandria, VA
Glenn was great. He showed up right on time and did a professional job on my clutch repair. I would (and will) hire him again.

Excellent Rating

(11)

Rating Summary
11
0
0
0
0
11
0
0
0
0
Number of Mercury Capri services completed
121+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercury MECHANICS
600+
experts on our platform

Recent articles & questions

P0072 OBD-II Trouble Code: Ambient Air Temperature Sensor Circuit Low
P0072 P0072 code definition Ambient Air Temperature Sensor Circuit Low Input Depending on the type of vehicle these are some related OBD-II Diagnostic Trouble Codes: P0070: Ambient Air Temperature Sensor Circuit P0071: Ambient Air Temperature Sensor Range/Performance P0073: Ambient Air...
How Long Does a Cruise Control Brake Release Switch Last?
The The cruise control brake release switch allows you to turn off the cruise control. On vehicles with a manual transmission, there is a clutch release switch that cancels the cruise control when the clutch pedal is pressed in. In...
The Guide to Right-of-Way Laws in Vermont
Motorists Motorists share the road with other vehicles and pedestrians, and often it is difficult to determine who should proceed first, and who should wait. That is why right-of-way laws are in place – to ensure that traffic moves efficiently,...

Brake light illuminated on the dash

Hello. The brake fluid level switch is probably getting stuck in the master cylinder causing the light to stay on. There could also be a leak (https://www.yourmechanic.com/services/brake-fluid-is-leaking-inspection) in the brake system which would cause the light to stay on. What...

hi my chevy malibu goes in reverse,neutral,park but not drive

If no power train codes appear, other than the misfiring on cylinder no. 2 which is not relevant to your issue, there may be a mechanical or hydraulic failure in the transmission such as a failed piston in a clutch...

There is a "clicking" or "hitting" sound when I release the accelerator or not braking. it sounds like a faulty part that is hitti

It is not clear from your description if the noise is engine or chassis related. If chassis related, the origin of the noise could be in anything from wheel bearings to brake components to drive axles. From your description, the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com