Mercury Capri Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(17)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(17)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Mercury Capri Power Steering Pump Replacement is $227 with $87 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1994 Mercury CapriL4-1.6L TurboService typePower Steering Pump ReplacementEstimate$648.42Shop/Dealer Price$750.77 - $1044.05
1992 Mercury CapriL4-1.6L TurboService typePower Steering Pump ReplacementEstimate$633.10Shop/Dealer Price$732.45 - $1023.48
1993 Mercury CapriL4-1.6L TurboService typePower Steering Pump ReplacementEstimate$633.10Shop/Dealer Price$732.49 - $1023.55
1993 Mercury CapriL4-1.6LService typePower Steering Pump ReplacementEstimate$633.10Shop/Dealer Price$732.49 - $1023.55
1991 Mercury CapriL4-1.6L TurboService typePower Steering Pump ReplacementEstimate$633.10Shop/Dealer Price$735.00 - $1027.93
1991 Mercury CapriL4-1.6LService typePower Steering Pump ReplacementEstimate$633.10Shop/Dealer Price$732.73 - $1023.97
1994 Mercury CapriL4-1.6LService typePower Steering Pump ReplacementEstimate$633.10Shop/Dealer Price$732.52 - $1023.60
1992 Mercury CapriL4-1.6LService typePower Steering Pump ReplacementEstimate$633.10Shop/Dealer Price$732.49 - $1023.55
Show example Mercury Capri Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercury mechanics

Real customer reviews from Mercury owners like you.

Excellent Rating

(17)

Rating Summary
17
0
0
0
0
17
0
0
0
0

Andrew

12 years of experience
962 reviews
Andrew
12 years of experience
Mercury Capri L4-1.6L - Axle / CV Shaft Assembly Replacement (Driver Side Front) - Shawnee Mission, Kansas
He was a little behind schedule but that was expected as it was raining all day long. i really did not expect him to come because of the rain. He put in the CV shaft in no time and was on his way. Excellent job!!!!

Glenn

20 years of experience
86 reviews
Glenn
20 years of experience
Mercury Capri L4-1.6L - Valve Cover Gasket - Alexandria, Virginia
Glenn is great. This is the second time I’ve hired him and I’ll gladly have him back for any future service. Highly recommended!

Damian

12 years of experience
430 reviews
Damian
12 years of experience
Mercury Capri L4-1.6L - Fuel Pump - Clermont, Florida
Amazing. Very kind and fast. Excellent work.

Omar

13 years of experience
287 reviews
Omar
13 years of experience
Mercury Capri L4-1.6L - Clutch Master Cylinder - Fort Lauderdale, Florida
Friendly service.

Excellent Rating

(17)

Rating Summary
17
0
0
0
0
17
0
0
0
0
Number of Mercury Capri services completed
187+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercury MECHANICS
600+
experts on our platform

Recent articles & questions

How Long Does a Courtesy Light Bulb Last?
The The courtesy light bulb is also called a dome light and is located on the ceiling in your vehicle. It is normally towards the front of the car and provides light when you open the car door. This light...
The Guide to Right-of-Way Laws in Arizona
Right-of-way Right-of-way laws are in place to protect you from damaging your vehicle or someone else’s, and to protect you and other motorists and pedestrians from injury. It makes sense to obey them. To have the right of way means...
B1898 OBD-II Trouble Code: Chime Input #2 Circuit Short to Ground
B1898 means there is a circuit issue with chime input 2, most likely due to a damaged electrical component.

What can affect the view from the rearview camera?

While the rearview camera on your car can help provide better safety when you’re backing up, there are several things that can affect the image quality and view. Here’s what you need to know: The view can be dim or...

Abs light is on what is the problem?

Your car is equipped with wheel speed sensors at each of the four wheels which monitor wheel speed while relaying this information constantly to the ABS and traction control system which are controlled by the car's ECU. When the ECU...

My water pump just dumped all its fluid. Is it safe to drive my truck if I fill it back up with water without a new pump?

Anytime there is no or low coolant in a vehicle, it can be very harmful to the engine. Low coolant can cause a seized engine or a blown head gasket. It is recommended that you have the vehicle towed to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com