Mercedes-Benz SLK320 Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(20)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(20)

Fuel Injector Replacement Estimate for Mercedes-Benz SLK320

Mercedes-Benz SLK320 Fuel Injector Replacement costs $964 on average.

CarServiceEstimateShop/Dealer Price
2002 Mercedes-Benz SLK320V6-3.2LService typeFuel Injector ReplacementEstimate$1705.23Shop/Dealer Price$2122.65 - $3243.04
2004 Mercedes-Benz SLK320V6-3.2LService typeFuel Injector ReplacementEstimate$1651.23Shop/Dealer Price$2068.73 - $3189.18
2003 Mercedes-Benz SLK320V6-3.2LService typeFuel Injector ReplacementEstimate$1651.23Shop/Dealer Price$2068.72 - $3189.17
2001 Mercedes-Benz SLK320V6-3.2LService typeFuel Injector ReplacementEstimate$1651.23Shop/Dealer Price$2068.62 - $3188.99
Show example Mercedes-Benz SLK320 Fuel Injector Replacement prices

Fuel Injector Replacement Service

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(20)

Rating Summary
20
0
0
0
0
20
0
0
0
0

Aurelio

36 years of experience
61 reviews
Aurelio
36 years of experience
Mercedes-Benz SLK320 V6-3.2L - 108,000 Miles Maintenance Service - New Braunfels, Texas
Very satisfied with the service provided by Joe

Tam

22 years of experience
251 reviews
Tam
22 years of experience
Mercedes-Benz SLK320 V6-3.2L - Oil Change - San Francisco, California

Luis

18 years of experience
310 reviews
Luis
18 years of experience
Mercedes-Benz SLK320 V6-3.2L - Crankshaft Position Sensor Replacement - Union, New Jersey
Great service

Nathan

29 years of experience
260 reviews
Nathan
29 years of experience
Mercedes-Benz SLK320 V6-3.2L - Brake Pads Replacement (Front, Rear) - Fort Worth, Texas
Did great job as always.

Excellent Rating

(20)

Rating Summary
20
0
0
0
0
20
0
0
0
0
Number of Mercedes-Benz SLK320 services completed
220+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1000+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Visor Organizer
Does Does your car constantly seem to verge on being a complete disaster? Do you find items all over the seats, and under them? A visor organizer can provide a very simple organization solution, giving you a way to take...
P0026 OBD-II Trouble Code: Intake Valve Control Solenoid Circuit Range/Performance (Bank 1)
P0026 P0026 trouble code definition Intake Valve Control Solenoid Circuit Range/Performance (Bank 1) What the P0026 code means P0026 is the OBD-II generic code indicating the engine control module (ECM) has determined that the variable valve lift solenoid for the...
The Traveler’s Guide to Driving in Ecuador
Ecuador Ecuador is home to many interesting places to visit, including an array of museums. The National Museum of Ecuador, located at the Casa de la Cultura, has a variety of archeological treasures. The National Cathedral Museum, the Museum of...

Gear shift lever not shifting out of park

Hello, the first thing to check would be the operation of the stop lamp switch. When you press the brakes does the stop lamp illuminate? If they do, good that tells you that the switch is good. Now if it...

Headlights replacement

Hello. In order to properly replace the headlights, the front bumper must be removed. Several of the bolts are hidden behind the bumper, so in order to fully remove it, this must be removed also. If you want to have...

Interior trunk release won't open trunk.

Hello, thank you for writing in. The vehicle uses an electric trunk release, and is likely having an electrical issue. There is a fuse to check and make sure it is good. After that you are in a position to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com