Mercedes-Benz SLK32 AMG Transfer case fluid is dirty Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(7)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(7)

Transfer case fluid is dirty Inspection Service

How much does a Transfer case fluid is dirty Inspection cost?

On average, the cost for a Mercedes-Benz SLK32 AMG Transfer case fluid is dirty Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Mercedes-Benz SLK32 AMGV6-3.2L TurboService typeTransfer case fluid is dirty InspectionEstimate$114.99Shop/Dealer Price$139.99 - $158.75
2004 Mercedes-Benz SLK32 AMGV6-3.2L TurboService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$120.04 - $138.82
2003 Mercedes-Benz SLK32 AMGV6-3.2L TurboService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$120.03 - $138.82
Show example Mercedes-Benz SLK32 AMG Transfer case fluid is dirty Inspection prices

A transfer case is unique to all-wheel drive and four-wheel drive vehicles, sending power from the engine to the rear wheels. The transfer case is a sealed unit and may be either gear-driven or chain-driven depending on the manufacturer. Because the transfer case is a sealed unit, it requires lubrication to keep all of the moving parts clean and at a reasonable temperature. Transfer case fluid ensures the longevity of parts in the transfer case.

How this system works:

In four-wheel drive and all-wheel drive vehicles, a transfer case is either connected directly to the back of the transmission, or by a small driveshaft further back in the vehicle. When activated, the transfer case takes power from the engine to the back wheels. Depending on the kind of vehicle, power may go to the rear wheels on a full-time or part-time basis. All-wheel drive systems are typically on all of the time while a four-wheel drive system are activated by either pressing a button in the vehicle or by manipulating a selector lever, typically located near the transmission hump on the floor. In both systems, transfer case fluid keeps the internal parts of the transfer case lubricated. Over time, transfer case fluid will become dirty and break down. When transfer case fluid breaks down you may notice shuddering from the vehicle while turning or a whining noise from the gears in the transfer case.

Common reasons for this to happen:

  • Time: Over time, transfer case fluid will break down and become dirty. Dirty transfer case fluid may cause moving parts in the transfer case to have more difficulty moving, which may cause them to fail.

  • Improper Filling: If the transfer case is not properly filled with transfer case fluid, it may break down more quickly, have difficulty dissipating heat, and keeping parts lubricated.

What to expect:

A top-rated mobile mechanic will come to your home or office and determine whether or not your transfer case fluid needs to be replaced. If it does, he or she will then provide a detailed inspection report outlining the reason the fluid needed to be replaced and the cost of any repairs that may need to be made.

How it's done:

A mechanic will first have your vehicle idle for a few minutes to warm the fluid as warm fluid will drain easier. The mechanic will then drain the old transfer case fluid through the drain plug. The drain plug on most transfer cases is magnetic and picks up metal shavings that otherwise might potentially damage components in the transfer case. The mechanic should clean the drain plug before replacing it. The mechanic will then remove the fill plug and add new fluid. The mechanic should also double-check the amount of fluid, he or she puts in the transfer case, ensuring that it was done properly. A vehicle that is under-lubricated may not dissipate heat or protect critical components as well as a vehicle that is properly lubricated. When the transfer case is full, the mechanic will replace the fill plug and check for any leaks.

How important is this service?

By choosing to not replace your transfer case fluid, you may compromise critical and expensive components inside the transfer case. Because the transfer case is a sealed unit, it is very important that the transfer fluid is filled properly so that heat is appropriately dissipated and components to not suffer from unneeded friction. Repairing a differential can be very expensive, so in order to preserve these components, you should have you transfer case fluid replaced at the correct intervals. Doing so could potentially save you a lot of money down the road.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(7)

Rating Summary
6
1
0
0
0
6
1
0
0
0

Miguel

35 years of experience
258 reviews
Miguel
35 years of experience
Mercedes-Benz SLK32 AMG V6-3.2L Turbo - Oil Change - Jacksonville, Florida
This was my first time working through this application. I was nervous as it felt unordinary not being in a shop but Miguel put those fears to bed. He was timely and knowledgeable about my car. I had a lively chat with him throughout the experience and great service. Thank you Miguel!

Jason

12 years of experience
13 reviews
Jason
12 years of experience
Mercedes-Benz SLK32 AMG V6-3.2L Turbo - Pre-purchase Car Inspection - Sykesville, Maryland
Top shelf mechanic. Diligent, courteous, thorough and professional. Demonstrated a high degree of expertise with limited production AMG model variant. Would recommend Jason for any pre-purchase inspection or general mechanical work on any vehicle he indicated he can support.

Robert

20 years of experience
1126 reviews
Robert
20 years of experience
Mercedes-Benz SLK32 AMG V6-3.2L Turbo - Crankshaft Position Sensor - Arvada, Colorado
Very pleasant, knowledgeable and professional. He came to appt early after calling to see if that was ok. Did a great job with car issue In a timely manner

Melvin

17 years of experience
221 reviews
Melvin
17 years of experience
Mercedes-Benz SLK32 AMG V6-3.2L Turbo - Oil Change - Atlanta, Georgia

Excellent Rating

(7)

Rating Summary
6
1
0
0
0
6
1
0
0
0
Number of Mercedes-Benz SLK32 AMG services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Lexus LS
With With a four-generation legacy spanning a quarter of a century, the Lexus LS may not be the riskiest, most cutting-edge vehicle in its class but its devotees don’t mind – the reliability, near perfection of design, and pronounced bent...
4 Essential Things to Know About Your Car’s Reverse Lights
Reverse lights are also called backup lights. They are used to warn other vehicles and people around the car that...
P2203 OBD-II Trouble Code: NOx Sensor Circuit High Input Bank 1
P2203 P2203 code definition NOx Sensor Circuit High Input Bank 1 What the P2203 code means This code indicates the NOx module is maintaining a high voltage to the NOx (Oxides of Nitrogen) sensor. What causes the P2203 code? This...

RPMs higher than normal

If the problem has just started to happen and you have not changed the tire size or anything else then I would say your clutch is slipping and the clutch would most likely need to be replaced. If you feel...

Key stuck in ignition; removed fuse to turn car off

You should have the ignition switch (https://www.yourmechanic.com/services/ignition-switch-replacement) and the passenger seat module replaced in order to keep your vehicle operating safely. The problem with the seat module seems to be very common across for the 2009 Saturn Sky, I would...

I had front brakes and rotors replaced and now my brakes are squeaking and grinding when I come to a stop. I just had front and b

Hello, thank you for writing in. A squealing noise typically happens because there is a vibration between the pad and the rotor. This is likely pertaining to the caliper that moves the brake pad back and forth. While they may...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com