Mercedes-Benz SL600 Mass Airflow Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Mass Airflow Sensor Replacement Service

How much does a Mass Airflow Sensor Replacement cost?

On average, the cost for a Mercedes-Benz SL600 Mass Airflow Sensor Replacement is $532 with $437 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2001 Mercedes-Benz SL600V12-6.0LService typeMass Airflow Sensor ReplacementEstimate$1048.31Shop/Dealer Price$1299.14 - $2012.26
2006 Mercedes-Benz SL600V12-5.5L TurboService typeMass Airflow Sensor ReplacementEstimate$968.39Shop/Dealer Price$1204.27 - $1872.47
2005 Mercedes-Benz SL600V12-5.5L TurboService typeMass Airflow Sensor ReplacementEstimate$968.39Shop/Dealer Price$1204.27 - $1872.47
2007 Mercedes-Benz SL600V12-5.5L TurboService typeMass Airflow Sensor ReplacementEstimate$968.39Shop/Dealer Price$1204.23 - $1872.40
1997 Mercedes-Benz SL600V12-6.0LService typeMass Airflow Sensor ReplacementEstimate$1028.31Shop/Dealer Price$1279.20 - $1992.36
1999 Mercedes-Benz SL600V12-6.0LService typeMass Airflow Sensor ReplacementEstimate$1028.31Shop/Dealer Price$1279.17 - $1992.31
1998 Mercedes-Benz SL600V12-6.0LService typeMass Airflow Sensor ReplacementEstimate$1033.31Shop/Dealer Price$1283.93 - $1996.89
2011 Mercedes-Benz SL600V12-5.5L TurboService typeMass Airflow Sensor ReplacementEstimate$973.39Shop/Dealer Price$1209.69 - $1878.19
Show example Mercedes-Benz SL600 Mass Airflow Sensor Replacement prices

What is the Mass Airflow Sensor all about?

The mass airflow sensor is a round tunnel made of plastic with a sensor attached inside. All cars take air from the outside and pass it into the engine through the air filter. The mass airflow sensor measures the amount of air entering the engine. For an engine to perform properly, it needs a specific amount of air-fuel mixture. The computer in the car reads the amount of air coming into the engine from the mass airflow sensor and then calculates the correct amount of fuel needed for proper engine performance. If the sensor goes bad, the engine will not know the right amount of fuel to add, causing problems including poor gas mileage, lack of power and more.

It is common for the mass airflow sensor to get dirty (if the air filter is dirty) and lose the ability to read the amount of air coming in the engine. If the vacuum hoses are leaking, it will give the same error code as mass airflow sensor failure.

When doing this job, the mechanic may recommend changing the electrical connector that connects the mass airflow sensor to the car's computer system. It is possible for the wires in the connector to break, causing the mass airflow sensor to not work.

Keep in mind:

  • Routinely changing your air filter can improve the lifespan of your mass airflow sensor
  • Often mass airflow sensors stop working because of bad connectors or wiring harnesses.
  • Anytime the mass airflow sensor is replaced, the air duct between the sensor and the intake manifold should be inspected.

How it's done:

  • Scan the computer in the car for codes.
  • Verify the problem.
  • Remove and replace the sensor if found faulty.
  • Check vacuum hoses for leaks and cracks.
  • Test drive the vehicle.

Our recommendation:

  • Changing the air filter on a regular basis will ensure that the car is getting cleaner air and hence performing optimally.
  • If the Check Engine light is on, get the car inspected as soon as you can.
  • If the Check Engine light is flashing, pull over and get the car towed to avoid costly repairs.
  • A mechanic should always inspect the vacuum hoses and snorkel attached to the mass airflow sensor when replacing it. It is possible for these items to have leaks. Replacing the sensor without fixing the leaks will not solve the problem.

What common symptoms indicate you may need to replace the Mass Airflow Sensor?

  • Check Engine light is on.
  • Car does not have power.
  • Excessive fuel consumption.
  • Car may not start.

How important is this service?

In order to run optimally, your vehicle needs to have a perfect fuel-to-air ratio. As the vehicle is moving, an uncontrollable amount of air enters the throttle body and heads into the intake manifold. As such, the fuel has to be adjusted to be optimal for the amount of air. The mass airflow sensor measures the mass of the air that is entering the vehicle, and sends the information to the car’s computer management system. This system then controls the amount of fuel that is injected into the cylinders, so that the ideal fuel-to-air ratio is achieved. When the mass airflow sensor stops working, the computer cannot receive information on the air intake, and the fuel-to-air ratio will be wrong. This will cause your engine to run poorly, and sometimes not at all. It will also impact your gas mileage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5)

Rating Summary
4
0
0
0
1
4
0
0
0
1

Edwin

40 years of experience
36 reviews
Edwin
40 years of experience
Mercedes-Benz SL600 V12-5.5L Turbo - Car does not shift from park to drive - Mount Pleasant, South Carolina
Great

Steven

14 years of experience
425 reviews
Steven
14 years of experience
Mercedes-Benz SL600 V12-6.0L - Loud screeching noise when I start the car - Goodyear, Arizona
I have an older Mercedes 600SL and was somewhat concerned about using some one other than a dealer, but my fears were put to rest after my initial conversation with Steve. Steve was on time, knowledgeable, had all of the required tools. diagnose the problem and gave me a stalemate of cost for the repair. He did not try to over sale me on something I didn't need. He made the repairs made sure that everything was correct and assured me that if I needed anything more he was just a phone call awaly. Steve called me the next day just to check that the repair was good.

Richard

21 years of experience
461 reviews
Richard
21 years of experience
Mercedes-Benz SL600 V12-6.0L - Car is not starting - Marietta, Georgia
Fast honest knew what he needed

Chris

22 years of experience
2229 reviews
Chris
22 years of experience
Mercedes-Benz SL600 V12-5.5L Turbo - Brake Pads Replacement (Front) - Huntington Beach, California
Highly recommend Chris and will request him next time I need service on my Mercedes SL600 V12 Turbo Roadster! Chris is an expert craftsman who really knows about my Mercedes. I was happy about saving money by not going to the dealer for service. Who knew you can have your car serviced at home while getting things done around the house instead of wasting time driving to a dealer and hanging out in their waiting area! I will definitely request Chris next time my car needs service!!

Excellent Rating

(5)

Rating Summary
4
0
0
0
1
4
0
0
0
1
Number of Mercedes-Benz SL600 services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Top Dead Center (TDC) Sensor
Common signs include the Check Engine Light coming on, car not starting, and engine misfiring or running rough.
How Long Does a Coolant Level Sensor Last?
The The coolant level sensor uses a moveable float device and a reed switch that senses when the radiator has low coolant. Once the sensor detects low coolant, the driver is alerted by a light illuminated on the dashboard. The...
How to Replace a Fuel Gauge Sender
The fuel gauge has a sender that goes bad when it says that the fuel level is different lower or higher than it actually is.

What Does the Mass Airflow Sensor Do?

Older systems use a movable vane in the intake stream called a Vane Air Flow (VAF) sensor. The VAF sensor used in Bosch L-Jetronic, Ford, and most Japanese electronic port fuel-injection systems is a movable vane connected to a laser-calibrated...

Oil sensor not working properly.

If the oil was checked first using the vehicle's computer and it read low you were correct to top it off. However, sometimes these vehicles can take a few minutes or a few miles of driving to reset the gauge...

The front end and steering wheel shakes when I accelerate.

You may have a traction control system that is activating when you are accelerating. This can be due to one of two things: the speed sensors in the front detect that a wheel is going faster than it really is,...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com