Mercedes-Benz S430 Intake Manifold Gaskets Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(79)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(79)

Intake Manifold Gaskets Replacement Service

How much does a Intake Manifold Gaskets Replacement cost?

On average, the cost for a Mercedes-Benz S430 Intake Manifold Gaskets Replacement is $410 with $87 for parts and $323 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Mercedes-Benz S430V8-4.3LService typeIntake Manifold Gaskets ReplacementEstimate$564.15Shop/Dealer Price$666.95 - $841.47
2005 Mercedes-Benz S430V8-4.3LService typeIntake Manifold Gaskets ReplacementEstimate$496.15Shop/Dealer Price$599.06 - $773.65
2001 Mercedes-Benz S430V8-4.3LService typeIntake Manifold Gaskets ReplacementEstimate$496.15Shop/Dealer Price$599.05 - $773.63
2003 Mercedes-Benz S430V8-4.3LService typeIntake Manifold Gaskets ReplacementEstimate$496.15Shop/Dealer Price$598.91 - $773.40
2006 Mercedes-Benz S430V8-4.3LService typeIntake Manifold Gaskets ReplacementEstimate$496.15Shop/Dealer Price$599.14 - $773.80
2000 Mercedes-Benz S430V8-4.3LService typeIntake Manifold Gaskets ReplacementEstimate$496.15Shop/Dealer Price$599.05 - $773.63
2002 Mercedes-Benz S430V8-4.3LService typeIntake Manifold Gaskets ReplacementEstimate$513.15Shop/Dealer Price$615.24 - $789.22
Show example Mercedes-Benz S430 Intake Manifold Gaskets Replacement prices

What is an intake manifold gasket and how does it work?

The intake on an engine may be made up of a lower intake manifold and an upper intake manifold or plenum. The lower intake manifold is a cast aluminum or molded plastic chamber bolted to the cylinder head of the engine. The intake manifold must be tightly sealed to the cylinder head(s) using a gasket in order to prevent air, oil, or engine coolant leaks.

When to consider replacing the intake manifold gasket:

Internal or external leaks. Due to constant temperature expansion and contraction of engine parts or overheating, the gasket’s ability to seal properly can be ruined, resulting in problems such as:

  • Internal or external engine coolant leaks. In some applications, the manifold has cooling passages within. If the manifold seal to the engine fails, coolant can leak externally or even into the engine oil crankcase, where coolant can be noticed in the engine oil.
  • Engine overheating. If the leak at the manifold is a leak of engine coolant, it can lead to engine overheating. However, there are other causes of engine overheating, so a mechanic would have to determine the actual cause.
  • External oil leaks. On some 6 and 8 cylinder engines, the intake manifold sits atop an oil-lubricated area of the engine block. If the manifold gasket has failed, oil can leak from the block to the exterior of the engine.
  • Poor engine operation, lean operation, rough idle. Vacuum air leaks into the manifold due to a defective gasket that will upset the air-fuel ratio. The engine may run poorly.
  • Check engine light. Minor leaks at the intake manifold gasket will not usually cause the check engine light to illuminate. However, as a leak persists, it may grow larger and it possible for the leak to degrade engine performance enough that it will cause a trouble code to set, which will cause the check engine light to illuminate.

How do mechanics replace the intake manifold gasket?

  • Working on a cold engine, the engine cover is removed. If the intake manifold has internal cooling system passageways, the engine coolant is drained below the level of those passageways.
  • The accelerator cable assembly and cruise control cable are removed and set aside. All electrical connections and emission and vacuum lines in the way of the intake are removed. Ignition components, such as the coil, are removed as needed. If the car has an upper plenum, that is removed and set aside.
  • If the fuel rail is bolted to the intake manifold, the supply and return connections to the fuel rail are disconnected.
  • Once all connections to the manifold are clear, the manifold is unbolted and removed from the engine.
  • Aluminum and plastic manifolds are checked with a machinist’s straightedge to ensure the surface flatness does not exceed the original equipment manufacturer’s specification. If the surface of a manifold is not flat, the new gasket will not seal properly. Plastic manifolds are checked for cracks, heat damage, and warpage.
  • Once the manifold is deemed re-usable or replaced as needed, the new gasket is applied, the manifold is put in position and the mounting bolts are torqued with a calibrated torque wrench in the OEM specified sequence. In some applications, RTV sealant must be applied in corners of the mounting surface or specified hard-to-seal spots, per the service manual.
  • All removed components are then re-installed in the reverse of the above steps.
  • Finally, the vehicle is run and checked for leaks, and test driven.

Is it safe to drive with an intake manifold gasket problem?

Yes. The principal concern with a leaking intake manifold gasket is potential damage to the engine, depending on where the leak is. Although the vehicle will generally be safe to drive, you should schedule service as soon as possible to minimize the chances of additional costly damage. If the leak involves coolant, it could lead to engine overheating damage or the coolant could contaminate the engine oil, which can damage the engine bearings. If there is an air leak to the cylinders, it can cause lean operation which could overheat the catalytic converter.

When replacing the intake manifold gasket keep in mind:

  • In engines where coolant flows through the intake manifold, a leaking intake manifold gasket can be either the cause of or result of engine overheating. If you have a leaking intake manifold gasket, and the engine has overheated, the entire engine should be inspected for damage, such as a blown head gasket. The engine cooling system thermostat should be replaced because engine overheating can damage the cooling system thermostat.
  • Some car engine designs are more likely than others to experience leaking intake manifold gaskets due to material and design issues. Your mechanic can inform you if your car represents one of these cases. Many times a re-designed gasket, or altered installation technique and torque values, will be relevant to avoid a recurrence of any leaks. Mechanics will consult Technical Service Bulletins to determine if any unique circumstance exists for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(79)

Rating Summary
75
2
1
0
1
75
2
1
0
1

Armando

10 years of experience
37 reviews
Armando
10 years of experience
Mercedes-Benz S430 V8-4.3L - Brakes, Steering and Suspension System - Miami, Florida
Had my 2002 Mercedes serviced. Was very professional. Went over the véhicle and gave me a détailed report of what needed to be done to keep it in top condition. Would use again and recommended to others.

Johnny

33 years of experience
243 reviews
Johnny
33 years of experience
Mercedes-Benz S430 V8-4.3L - Car is not starting - Keller, Texas
Very Professional and likeable

Stacy

24 years of experience
366 reviews
Stacy
24 years of experience
Mercedes-Benz S430 V8-4.3L - Serpentine/Drive Belt Replacement - Lithonia, Georgia
Great job

Theodore

16 years of experience
1573 reviews
Theodore
16 years of experience
Mercedes-Benz S430 V8-4.3L - Oil/Fluid Leak - Bellevue, Washington
He really knows his stuff! I wish he could perform all the services on my cars!

Excellent Rating

(79)

Rating Summary
75
2
1
0
1
75
2
1
0
1
Number of Mercedes-Benz S430 services completed
869+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1000+
experts on our platform

Recent articles & questions

Insurance Requirements for Car Registration in Arkansas
In In Arkansas, all drivers are required to carry liability automotive insurance, or “financial responsibility,” in order to operate a vehicle legally and maintain vehicle registration. This law applies to any passenger vehicle that is operated on public roadways in...
New York Speed Limits, Laws, and Fines
Following Following is an overview of the laws, limits, and fines as they relate to speeding traffic violations in the state of New York. Speed limits in New York 65 mph: limited access freeways and interstates 55 mph: default speed...
How Much More Money Can You Earn as an ASE Certified Mechanic?
Automotive technician jobs pay 20-30% more than the average mechanic salary when ASE certified. Take ASE tests to increase your technician salary.

AC/heater fan runs constantly even with switch off

The most common cause of this problem is the blower motor control processor mounted in the A/C evaporator case. I'd start by checking that first I were you. I you need some assistance however, feel free to contact a professional...

Car starts then sputters and dies. Last longer if I give it gas, slowly dies after.

Hello, thank you for writing in. The issue will need some further testing before we will know definitively. To begin, considering the symptoms, start by measuring your fuel pressure. If the pressure is weak, you want to replace the fuel...

Code P0220

It sounds like you are describing the symptoms of a failing throttle position sensor. The throttle position sensor (https://www.yourmechanic.com/services/throttle-position-sensor-replacement) monitors the throttle position of the throttle plate inside the throttle body in relation to your foot position on the gas...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com