Mercedes-Benz S400 Automatic Shutdown Relay Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(9)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(9)

Automatic Shutdown Relay Replacement Service

How much does a Automatic Shutdown Relay Replacement cost?

On average, the cost for a Mercedes-Benz S400 Automatic Shutdown Relay Replacement is $114 with $19 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2010 Mercedes-Benz S400V6-3.5L HybridService typeAutomatic Shutdown Relay ReplacementEstimate$153.15Shop/Dealer Price$180.19 - $221.94
2013 Mercedes-Benz S400V6-3.5L HybridService typeAutomatic Shutdown Relay ReplacementEstimate$133.15Shop/Dealer Price$160.22 - $201.99
2011 Mercedes-Benz S400V6-3.5L HybridService typeAutomatic Shutdown Relay ReplacementEstimate$133.15Shop/Dealer Price$160.22 - $201.99
2012 Mercedes-Benz S400V6-3.5L HybridService typeAutomatic Shutdown Relay ReplacementEstimate$133.15Shop/Dealer Price$160.18 - $201.92
Show example Mercedes-Benz S400 Automatic Shutdown Relay Replacement prices

What is the Automatic Shutdown Relay all about?

When you turn the key for your ignition to start, many different things happen. The fuel pump turns on, sending gas from the tank, through the lines, to the injectors. The battery sends voltage to the ignition system, which creates a spark, igniting fuel vapor and starting your engine. However, if the automatic shutdown relay (ASD) is not working, none of this will happen.

The automatic shutdown relay controls the power that is supplied to the ignition, the fuel pump, and the injectors, as well as other components. It is only activated for a few seconds during cranking, and is then turned off. Depending on the make and model in question, the automatic shutdown relay could be located under the hood, under the dash, or in another position.

As with any other electrical component, your automatic shutdown relay is subject to wear and tear, and frequent stopping and starting of the engine will exacerbate that wear. Eventually, it will fail and you’ll be left with a vehicle that doesn’t crank.

Keep in mind:

  • The ASD relay is not inspected during normal maintenance, and will only be checked during diagnostics for problems with the vehicle not cranking.
  • Many other problems can cause your engine not to crank, so professional diagnosis is necessary.
  • ASD failure is relatively rare, but it does happen.

How it's done:

  • The automatic shutdown relay is verified to see if it needs to be replaced
  • The defective automatic shutdown relay is removed
  • The new automatic shutdown relay is installed
  • The automatic shutdown relay is tested for operation
  • The vehicle is tested to ensure proper operation of the automatic shutdown relay

Our recommendation:

Your automatic shutdown relay provides power for some of the most important systems on your vehicle during ignition. If it fails, your engine will not crank, and it cannot be jumpstarted. If you are experiencing a no start condition, it may be the ASD relay, but it could be another problem. Seek immediate professional diagnosis and replacement by one of our expert mechanics.

What common symptoms indicate you may need to replace the Automatic Shutdown Relay?

  • Engine will not start
  • Check Engine light is on
  • Engine starts but stalls and dies

How important is this service?

Without an operational automatic shutdown relay, your engine will not start, which means your vehicle is not able to move. However, there are many other problems that can create the same symptom, ranging from a dead battery to a damaged battery, or a damaged cable to a failed main relay. If your automatic shutdown relay has failed, you will have to replace it before your vehicle will operate again.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(9)

Rating Summary
9
0
0
0
0
9
0
0
0
0

Zachary

9 years of experience
43 reviews
Zachary
9 years of experience
Mercedes-Benz S400 V6-3.5L Hybrid - Brake Pads Replacement (Front, Rear) - Houston, Texas
Very honest and knowledgeable,

Joe

23 years of experience
85 reviews
Joe
23 years of experience
Mercedes-Benz S400 V6-3.5L Hybrid - Auxiliary Battery Replacement - Fort Worth, Texas
Very polite. Knew what he was doing.

Richard

20 years of experience
126 reviews
Richard
20 years of experience
Mercedes-Benz S400 V6-3.5L Hybrid - 110,000 Miles Maintenance Service - Weatherford, Texas
Very efficient and polite gentleman.. knew what he was doing.

Jose

20 years of experience
12 reviews
Jose
20 years of experience
Mercedes-Benz S400 V6-3.5L Hybrid - Air Filter - Pompano Beach, Florida
Very precise and professional.

Excellent Rating

(9)

Rating Summary
9
0
0
0
0
9
0
0
0
0
Number of Mercedes-Benz S400 services completed
99+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

What Is the Difference Between a 4-Stroke and 2-Stroke Engine?
Four-stroke and two-stroke engines have similar components, but don't work the same way. Four-stroke engines are often found in off-road vehicles.
P0536 OBD-II Trouble Code: A/C Evaporator Temperature Sensor Circuit Range/Performance
P0536 means an issue with the A/C temperature sensor circuit, often caused by damaged electrical components, or low refrigerant levels.
How to Replace a Turn Signal Switch
Turn signals are important for your safety and others the road. A faulty switch will be loose or stop returning once completing a turn.

Code P0222

If you replace the TPS sensor on the throttle body, you do not require reprogramming. I would still disconnect the battery for at least thirty minutes to reset the computer. What concerns me are the other two codes. Unless the...

engine full of gas

Hi there. The issue is the fuel pump relay is malfunctioning and causing the fuel pump to pump to much when it is not demanded. The knocking noise is the fuel going into the cylinders and hydrolocking the cylinders. I...

My 745li won't stay in gear.

Hi there. The computer (ECM) is locking out the transmission from engaging a drive mode. When this happens, something inside the transmission has failed, like a solenoid or the pump pressure is low. Check the transmission fluid and make sure...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com