Mercedes-Benz R500 Transfer case fluid is low Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(12)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(12)

Transfer case fluid is low Inspection Service

How much does a Transfer case fluid is low Inspection cost?

On average, the cost for a Mercedes-Benz R500 Transfer case fluid is low Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Mercedes-Benz R500V8-5.0LService typeTransfer case fluid is low InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2007 Mercedes-Benz R500V8-5.0LService typeTransfer case fluid is low InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
Show example Mercedes-Benz R500 Transfer case fluid is low Inspection prices

If you have a four-wheel drive or an all-wheel drive car, you have more than just the engine and the transmission to worry about. You also have a transfer case, which is responsible for sending power from the transmission to all four wheels via drive shafts. If your transfer case fluid is low, there’s a problem that should be repaired before you can safely drive.

How this system works:

A transfer case does exactly what the name implies – it transfers power from the transmission to the wheels. However, it will work differently depending on the type of vehicle you drive. If you drive a four-wheel drive truck, then the primary wheels are driven by the driveshaft and the transfer case really only comes into play when you engage four-wheel drive mode. However, if you have an all-wheel drive vehicle, or an all-time four-wheel drive system, then the transfer case will be used at all times (because all four wheels must work at once, at all times).

The transfer case mounts to the end of the transmission, and a shaft extends from the transmission into the transfer case. Inside the transfer case, there are internal forks and gears that are responsible for transmitting the rotational power of the transmission to two other drive shafts – one going to the rear differential, and another going to the front differential. Within each differential, rotational power is split again, and redirected at 90 degrees to each wheel.

Common reasons for this to happen:

  • Leaking Input Seal at Transmission: If you’re experiencing low transfer case fluid, one of the first possible problems to consider is the input seal on the transmission side of things. Over time and through normal wear and tear, these seals will degrade, eventually letting fluid seep out.

  • Leaking Output Shaft Seal Rear: Another potential problem is the output shaft seal where the rear drive shaft attaches to the transfer case. Like the input seal on the transmission side, this one can also wear to the point that it begins to leak.

  • Leaking Output Shaft Seal Front: You have one other potential seal that might be leaking. This one is located where the front drive shaft connects with the transfer case. Like the other two we’ve mentioned, this seal will eventually degrade and begin to leak.

  • Leaking Vent Hose: While unlikely, it’s possible that you’re losing transfer case fluid from the vent hose.

  • Failed Speed Sensor Gasket: If your transfer case is equipped with a speed sensor, it’s possible that you’re leaking fluid around the sensor (the seal has failed).

  • Leaking Transfer Case Gasket: The transfer case gasket is a lot like an oil pan gasket in that it will eventually degrade to the point that it begins to leak fluid (all gaskets and seals on your vehicle are subject to wear, leakage and eventual failure).

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect the leak from your transfer case, as well as the condition of all seals and the level of your fluid. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect the transfer case first to determine the location of the leak. It may be necessary to clean old fluid from the transfer case and then test drive the vehicle to determine the actual source of the leak. The mechanic will also check the level of fluid.

How important is this service?

If your transfer case is leaking, the internals are in danger of experiencing high heat and friction. Just like your differentials and your transmission, the moving parts within the transfer case must be lubricated properly at all times, or damage will result (depending on the setup of your vehicle, damaged transfer case components could leave the vehicle unable to be driven). One of our professional mechanics can inspect your transfer case, determine the point of the leak, and repair the problem.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(12)

Rating Summary
11
0
0
0
1
11
0
0
0
1

Manuel

12 years of experience
91 reviews
Manuel
12 years of experience
Mercedes-Benz R500 V8-5.0L - Axle / CV Shaft Assembly Replacement (Driver Side Front) - Naples, Florida
Manuel is a professional through and through. I highly recommend him as he knows exactly what he’s doing and you can trust his work. I used to own and run a shop, so know the industry well. Manuel is a gem, book him.

Rudy

36 years of experience
30 reviews
Rudy
36 years of experience
Mercedes-Benz R500 V8-5.0L - Oil Change - Houston, Texas
This guys has been working as Mercedes Benz mechanic for 18 years. Still does. Knowledgeable person and courteous.

Richard

11 years of experience
450 reviews
Richard
11 years of experience
Mercedes-Benz R500 V8-5.0L - Brake Pads Replacement (Front) - Clinton, Maryland
Wonderfuj! Richard was very professional and courteous and explained everything he had done upon completion of the job. I was very satisfied as I was the first time I use Richard.

Dellano

18 years of experience
519 reviews
Dellano
18 years of experience
Mercedes-Benz R500 V8-5.0L - Car is not starting - Hyattsville, Maryland
Dellano made the necessary checks to the car and determined that the reason for the battery drainage is due to a lack of driving

Excellent Rating

(12)

Rating Summary
11
0
0
0
1
11
0
0
0
1
Number of Mercedes-Benz R500 services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Smart ForTwo
Whether Whether you’re won over by the European charm, or you just want a vehicle that will make parking so much easier, you just might enjoy the 2012 Smart ForTwo. However, just be prepared that as the name suggests, this...
P0936 OBD-II Trouble Code: Hydraulic Pressure Sensor Circuit Intermittent
P0936 means there is an issue with a circuit in the hydraulic pressure sensor, most likely due to damaged electrical components.
B2108 OBD-II Trouble Code: Trunk Key Cylinder Switch Failure
B2108 trouble code means the trunk key cylinder switch has failed, often caused by faulty components in the key cylinder switch.

Car losing power; etc light

When a warning light illuminates, usually there is a module with a stored fault code that has detected a system error. Have a technician experienced with vehicle electronics scan the vehicle for any stored codes (https://www.yourmechanic.com/services/warning-light-is-on-inspection) and observe vehicle data....

My abs and brakes light is on..

Hello. I usually start by checking the brake fluid level and the level sensor. Most of the time when these lights are on together it is because of low fluid. If the fluid level is good and if the sensor...

Headlight issue

Hi there: Depending on what type of vehicle you have, the problem is either caused by a loose electrical connection, a bad headlight switch (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-headlight-switch) or a faulty electrical relay. You might want to contact a local mechanic to complete...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com