Mercedes-Benz ML430 Engine is sputtering Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(32)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(32)

Engine is sputtering Inspection Service

How much does a Engine is sputtering Inspection cost?

On average, the cost for a Mercedes-Benz ML430 Engine is sputtering Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2000 Mercedes-Benz ML430V8-4.3LService typeEngine is sputtering InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2001 Mercedes-Benz ML430V8-4.3LService typeEngine is sputtering InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
1999 Mercedes-Benz ML430V8-4.3LService typeEngine is sputtering InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
Show example Mercedes-Benz ML430 Engine is sputtering Inspection prices

In almost all cases, a sputtering engine is trying to tell you that there is a deeper problem that requires immediate attention. An engine running out of gas will definitely sputter but if the gas gauge indicates full, the problem lies deeper inside the engine compartment.

An incomplete combustion in the engine will cause a sputter as can the ignition system. The fuel system, such as a blocked fuel injector may also cause the vehicle to sputter. While a sputtering engine may not seem like a major issue, it is a symptom of a bigger problem that will not self-correct and will eventually result in a much more expensive repair. The source of the sputter should be investigated and repaired as soon as possible.

How this system works:

A sputtering engine can have its root cause located in a number of different systems. Here are two of the more common ones, the exhaust and fuel system.

The exhaust system collects exhaust gases from the cylinder head via the exhaust manifold, which acts as a funnel diverting exhaust gases away from the cylinders. The gases are then released through the front pipe where they travel to the catalytic converter. The catalytic converter removes the harmful elements of the gases such as carbon monoxide and hydrogen monoxide, converting them into inert gases.

The gases exit the catalytic converter into the muffler, which reduces the noise levels of the engine, and finally the exhaust fumes exit the vehicle at the tail pipe.

The fuel system is responsible for storing and supplying fuel to the car to drive the engine. Fuel is mixed with air, atomized and vaporized. This happens in the engine intake system. This mixture is then compressed in the engine cylinder and then ignited which produces the energy which moves the pistons.

Common reasons for this to happen:

  • Leak in Exhaust Manifold: A leak in the exhaust manifold, which collects exhaust gases, can cause the engine to sputter or run unevenly. This condition can also cause the Check Engine light to trigger as well as present increased engine noise and poor performance from the engine. A cracked or leaking exhaust manifold can create dangerous driving condition as the escaping hot gases can melt nearby plastic components. It can also lead to exhaust fumes making their way into the car cabin.

  • Worn Seals or Gaskets: There are a number of gaskets and seals in the exhaust system and if any of them are failing it can create a rough or sputtering engine. Gaskets and seals wear down over time and will eventually have to be replaced. Failing to do this in a timely manner can damage the exhaust manifold which is a much more expensive repair.

  • Failing Catalytic Converter: If the engine is sputtering, running rough and has a smell of rotten eggs it is probably due to a failing catalytic converter. In most cases, the Check Engine light will trigger as well. When a converter starts to fail, it isn’t able to burn off the hydrocarbons in the exhaust, and is no longer breaking down the sulfur created by the engine. This leads to the strong rotten egg smell. Eventually the car will not start at all as the catalytic converter becomes totally blocked.

  • Malfunctioning Oxygen Sensors: Oxygen sensors measure how rich or lean the exhaust gases are when they leave the vehicles combustion chamber. The vehicle computer uses this information to adjust the amount of fuel entering the engine. A dirty or failing sensor puts too much or too little fuel into the engine causing it to run rough or sputter. Oxygen sensors must be replaced on a regular basis.

  • Dirty Fuel Injectors: Fuel injectors spray fuel into the cylinders. It is then mixed with air and ignited. Fuel injector nozzles can become clogged over time, which can lead to a sputtering engine, slow acceleration and the car not having enough power. Fuel injectors can be cleaned if the problem is caught early, but as the conditions worsens, the injectors may have to be replaced.

  • Bad or Dirty Spark Plugs: Spark plugs are responsible for igniting the fuel in the combustion chamber. If they are not working correctly or are dirty they don’t ignite the fuel cleanly and the car can misfire or sputter. The plugs will need to be replaced or cleaned.

  • Dirty Mass Airflow Sensor: The mass airflow sensor measures the amount of air that is entering the fuel injection system. It sends that information to the vehicle computer, which then delivers the proper amount of fuel to the combustion chamber. A dirty mass airflow sensor will send the wrong information the computer resulting in a rough running or sputtering engine.

  • Vacuum Leak: A leak in the vacuum system can lead to a sputtering or rough running engine. As the problem progresses the vehicle can hesitate or stall when accelerating.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the engine is sputtering issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

A mechanic will inspect your car's exhaust system and other important components of your vehicle. This includes the exhaust manifold, exhaust seals and gaskets, oxygen sensors, airflow sensors and more. It may be necessary for the mechanic to crank up your car to diagnose your engine's sputtering.

How important is this service?

In almost all cases, a sputter engine is a symptom of a more serious issue lurking below the surface. If the problem is not diagnosed and repaired in a timely manner the vehicle will likely start to stall, become hard to start and eventually stop running altogether.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(32)

Rating Summary
32
0
0
0
0
32
0
0
0
0

Michael

16 years of experience
606 reviews
Michael
16 years of experience
Mercedes-Benz ML430 V8-4.3L - Exhaust Gas Recirculation/EGR Valve - Kennesaw, Georgia
Very knowledgeable! Would have no problem using him again and hope that I do!

Jeshua

7 years of experience
131 reviews
Jeshua
7 years of experience
Mercedes-Benz ML430 V8-4.3L - Brake Pads Replacement (Front, Rear) - Bradenton, Florida
Jeshua was right on time. Very friendly and professional. Performed my service much quicker than I expected and I am super pleased. My truck brake sensors no longer are beeping and brakes are working great now!! I am going to definitely use Your Mechanic again in future and hopefully Jeshua will perform my service. I will recommend to friends and family as well. Thank you so much for your making my day off from work an actual day off!!

Kenneth

20 years of experience
792 reviews
Kenneth
20 years of experience
Mercedes-Benz ML430 V8-4.3L - Rear lights are not working Inspection - Los Angeles, California
Great

Vadym

6 years of experience
43 reviews
Vadym
6 years of experience
Mercedes-Benz ML430 V8-4.3L - Serpentine/Drive Belt Replacement - Denver, Colorado
Very friendly, knew what he was doing. Got the work done fast and efficiently.

Excellent Rating

(32)

Rating Summary
32
0
0
0
0
32
0
0
0
0
Number of Mercedes-Benz ML430 services completed
352+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Top 10 PZEV Cars for Eco-Friendly Drivers
Teddy Leung / Shutterstock.com The whole idea of a PZEV (that is, a partial zero-emissions vehicle), seems paradoxical. You’d think it’d have to either be zero-emissions or not in the category at all. But as contradictory as...
P2004 OBD-II Trouble Code: Intake Manifold Runner Control Stuck Open Bank 1
P2004 code definition Intake Manifold Runner Control (IMRC) Stuck Open Bank 1 Related Trouble Codes: P2005: IMRC Stuck Open Bank 2 P2006:...
P0547 OBD-II Trouble Code: Exhaust Gas Temperature Sensor Circuit Bank 2 Sensor 1
P0547 means that the PCM is reading a malfunction in the exhaust gas temperature sensor circuit due to faulty wiring, sensor issues or exhaust leaks.

Car chugs a couple of times wont start

Hello - it is possible that the engine "jumped time" because of the momentary loss of oil pressure after the oil change. (The fact that you changed to synthetic oil does not come into play here.) The timing chain tensioners...

Over tightened and broke exhaust rocker bolt, what can I do?

Hi there. This is a very difficult question to answer since we are not able to see the damage that occurred. If you broke the bolt, it's possible that debris may have fallen down the oil galleys into the block....

Clutch pedal is sticking to the floor and sometimes won’t go into gear because of it

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com