Mercedes-Benz GLK350 Oxygen Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(190)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(190)

Oxygen Sensor Replacement Service

How much does a Oxygen Sensor Replacement cost?

On average, the cost for a Mercedes-Benz GLK350 Oxygen Sensor Replacement is $465 with $209 for parts and $256 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2013 Mercedes-Benz GLK350V6-3.5LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$1487.59Shop/Dealer Price$1829.13 - $2747.41
2012 Mercedes-Benz GLK350V6-3.5LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$674.07Shop/Dealer Price$825.81 - $1174.52
2011 Mercedes-Benz GLK350V6-3.5LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$674.07Shop/Dealer Price$825.81 - $1174.51
2015 Mercedes-Benz GLK350V6-3.5LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$860.03Shop/Dealer Price$1058.15 - $1546.24
2015 Mercedes-Benz GLK350V6-3.5LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$1043.79Shop/Dealer Price$1288.03 - $1914.08
2013 Mercedes-Benz GLK350V6-3.5LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$768.39Shop/Dealer Price$943.71 - $1363.15
2014 Mercedes-Benz GLK350V6-3.5LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$781.89Shop/Dealer Price$956.56 - $1375.52
2014 Mercedes-Benz GLK350V6-3.5LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$1447.09Shop/Dealer Price$1789.83 - $2709.00
Show example Mercedes-Benz GLK350 Oxygen Sensor Replacement prices

What is the Oxygen Sensor all about?

With each new model year, manufacturers are adding more oxygen sensors to better manage engine operation. Some high performance engines have an oxygen sensor for each cylinder as well as one for the rear of each catalytic convertor. The sensors are located either underneath the hood or underneath the car. The oxygen sensors are connected (screwed) to the exhaust pipe, either in front or back of the catalytic converter. The front (upstream) sensors measure the amount of oxygen in the exhaust system. The purpose of the front oxygen sensor(s) is to measure how rich or lean the gases are as the gases exit the combustion chamber. Depending upon whether the exhaust gas is lean (high in oxygen content) or rich (low in oxygen content), the amount of fuel entering the engine is adjusted by the engine management computer to try and maintain an ideal mixture that produces the lowest emissions output from the catalytic convertor.

Rear (downstream) sensors are located behind the catalytic converter. The purpose of the rear oxygen sensor(s) is to monitor the oxygen content of the exhaust gases leaving the catalytic convertor.

If one or more of the oxygen sensors are faulty, your car may not pass the emissions test. If you drive your car with a faulty oxygen sensor, you may get poor gas mileage and it can damage the catalytic converter.

Oxygen Sensor-MATROX-1

When replacing the oxygen sensor remember:

  • Many oxygen sensors are damaged by leaking oil or coolant. If that is the case, the cause of that leak needs to be identified and repaired, or else the replacement oxygen sensor will be damaged as well.
  • New vehicles require specific oxygen sensors, and not the universal sensors that were common prior to 1996.

How it's done:

  • Scan the computer in the car for codes.
  • Inspect for vacuum leaks and holes in the exhaust system.
  • Remove and replace the oxygen sensor if it is bad.
  • Check electrical connections.
  • Check for proper operation of oxygen sensors.
  • Clear diagnostic codes.
  • Test drive car.

Our recommendation:

Keep up with the tune-ups. If check engine light is on, don't drive the car too long without getting it inspected. If check engine light is flashing, pull over and get the car towed to avoid costly repairs. Ask the mechanic to inspect the vacuum hoses and leaks in the exhaust system. If the vacuum hose or exhaust system is leaking, it will display an oxygen sensor fault code. Replacing an oxygen sensor may not fix the problem.

What common symptoms indicate you may need to replace the Oxygen Sensor?

  • Check Engine light is on.
  • Car is getting poor gas mileage.
  • Emission test fails.

How important is replacing the oxygen sensor?

Your vehicle has multiple oxygen sensors, and they all help the car run optimally. The front sensors measure how much oxygen is in the exhaust stream to measure how rich or lean the gases leaving the gas chamber are. The rear sensors measure the oxygen content of the gases as they leave the catalytic converter. The oxygen sensors then relay this information to your vehicle’s electronic control unit, so that it can adjust as necessary. Because cars depend on an ideal fuel-to-air ratio to function optimally, the oxygen sensors are leaned on for engine performance. When your oxygen sensors fail your car will run less smoothly, get worse mileage, and have worse emissions.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(190)

Rating Summary
180
6
2
0
2
180
6
2
0
2

Ostus

8 years of experience
70 reviews
Ostus
8 years of experience
Mercedes-Benz GLK350 V6-3.5L - brake sensors - Atlanta, Georgia
Friendly, fast, and knowledgeable.

Chris

22 years of experience
2223 reviews
Chris
22 years of experience
Mercedes-Benz GLK350 V6-3.5L - Drive Belt Tensioner Replacement - Tustin, California
As a first time customer i am very impressed with the service set up. Our mechanic Chriss did a great work in sufficient time. He is very professional and knowledgeable which made me feel more confident in his work.

Anthony

11 years of experience
103 reviews
Anthony
11 years of experience
Mercedes-Benz GLK350 V6-3.5L - Back To School Promo - Fort Worth, Texas
Mechanic did an efficient and great job

Damian

11 years of experience
465 reviews
Damian
11 years of experience
Mercedes-Benz GLK350 V6-3.5L - Battery - Silver Spring, Maryland
It is very good to use your services first time.

Excellent Rating

(190)

Rating Summary
180
6
2
0
2
180
6
2
0
2
Number of Mercedes-Benz GLK350 services completed
2090+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing EGR Temperature Sensor
Common signs include engine ping or knock, the Check Engine Light coming on, and failing an emissions test.
Symptoms of a Bad or Failing Oil Pressure Sensor
Common signs include the Oil Pressure Light coming on or blinking constantly despite oil levels being fine or the oil pressure gauge reading zero.
How Long Does an EGR Temperature Sensor Last?
Are Are you familiar with the EGR (exhaust gas recirculation) system in your car? If not, this is something all modern cars have. The purpose of this system is to greatly reduce the amount of emissions produced by your car....

Car not cranking

Hi there. This vehicle not starting is an indication that the fuel filter and fuel pump are going bad. Over time, the fuel pump will fail and not put out enough fuel pressure to start the car. I would have...

Bad crank sensor

Hello. Just about anything is possible but it is unlikely. I have seen crank sensors (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-crankshaft-position-sensor) go bad and cause many issues, but if you are not having any other issues then I think that it is unlikely. If I...

Where is located the sensor camshaft on my avenger 2009 2.4l?

Hi there. The camshaft position sensor is located in the back of the engine next to the EGR engine gas recirculation valve attached to the cylinder head under the valve cover. It would be round with two bolts and have...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com