Mercedes-Benz G550 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(7)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(7)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Mercedes-Benz G550 Power Steering Pressure Hose Replacement is $592 with $340 for parts and $252 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2010 Mercedes-Benz G550V8-5.5LService typePower Steering Pressure Hose ReplacementEstimate$958.90Shop/Dealer Price$1140.22 - $1658.65
2012 Mercedes-Benz G550V8-5.5LService typePower Steering Pressure Hose ReplacementEstimate$1066.32Shop/Dealer Price$1262.99 - $1837.85
2014 Mercedes-Benz G550V8-5.5LService typePower Steering Pressure Hose ReplacementEstimate$1006.22Shop/Dealer Price$1187.96 - $1717.82
2011 Mercedes-Benz G550V8-5.5LService typePower Steering Pressure Hose ReplacementEstimate$942.68Shop/Dealer Price$1118.51 - $1632.82
2013 Mercedes-Benz G550V8-5.5LService typePower Steering Pressure Hose ReplacementEstimate$1066.32Shop/Dealer Price$1268.50 - $1847.48
2009 Mercedes-Benz G550V8-5.5LService typePower Steering Pressure Hose ReplacementEstimate$986.48Shop/Dealer Price$1163.80 - $1679.23
Show example Mercedes-Benz G550 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0

Tabitha

18 years of experience
379 reviews
Tabitha
18 years of experience
Mercedes-Benz G550 V8-5.5L - Headlight Bulb Replacement (Driver Side Low Beam) - La Jolla, California
very knowledgable, patient and good comunicator., detailed explanations.

Robert

21 years of experience
1307 reviews
Robert
21 years of experience
Mercedes-Benz G550 V8-5.5L - Battery - Thornton, Colorado
Great

Nazareth

28 years of experience
345 reviews
Nazareth
28 years of experience
Mercedes-Benz G550 V8-5.5L - Oil Change - Pasadena, California
Nazareth is an exceptionally competent and nice person, It was a pleasure to deal with. Highly recommending his service.

Jason

33 years of experience
617 reviews
Jason
33 years of experience
Mercedes-Benz G550 V8-5.5L - Car is not starting - Saratoga, California
Jason is very knowledgeable and great at what he does. He is punctual and very friendly. I highly recommend him for any type of car service.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0
Number of Mercedes-Benz G550 services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How Much Does a Mechanic Make in Nevada?
Automotive technician jobs in Nevada have an average mechanic salary of $40k, while the national average is roughly $37k.
How Long Does a Fuel Gauge Sender Last?
The The amount of gas in a car plays a huge role in its level of functionality. The only way that you will be able to keep the fuel gauge in your car accurate is by having a fully functional...
How Long Does an EGR Pressure Feedback Sensor Last?
In In today's world people are more aware of exhaust gases than ever before. With that said measures have been built into modern vehicles that are meant to cut down on the emissions released into the air. Built into your...

Car started vibrating a lot

Hello there. The LX470 does, in fact, take premium gasoline (https://www.yourmechanic.com/article/how-to-know-what-type-of-gas-to-use-by-jason-unrau). When a lower octane is used such as 87 unleaded than there is a possibility for the engine to knock. In most cases, the vehicle's computer will adjust to...

Car pulls to the right after tire rotation and balancing

Hello. Thanks for writing in about your Infiniti EX35. A pull to the right is not normal. If the alignment is in specification, then the frame needs to be checked as it may not be straight. If it is, then...

Squeeking noise coming from front driver-side tire only

It is possible you have worn brake pads and the sensor is telling you the pads are worn down too far. Since you also had an ABS light come on you may have a bad bearing and sensor in that...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com