Mercedes-Benz G550 Oil Pan Gasket Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(7)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(7)

Oil Pan Gasket Replacement Service

How much does a Oil Pan Gasket Replacement cost?

On average, the cost for a Mercedes-Benz G550 Oil Pan Gasket Replacement is $551 with $138 for parts and $413 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2017 Mercedes-Benz G550V8-4.0L TurboService typeOil Pan Gasket ReplacementEstimate$802.03Shop/Dealer Price$920.99 - $1179.98
2018 Mercedes-Benz G550V8-4.0L TurboService typeOil Pan Gasket ReplacementEstimate$689.87Shop/Dealer Price$802.62 - $1042.80
2016 Mercedes-Benz G550V8-4.0L TurboService typeOil Pan Gasket ReplacementEstimate$688.75Shop/Dealer Price$833.89 - $1097.74
Show example Mercedes-Benz G550 Oil Pan Gasket Replacement prices

What is the Oil Pan Gasket all about?

An oil pan is a metal container that contains the engine oil. The oil pan gasket seals the oil pan to the bottom of the engine. The engine has a lot of moving parts that need to be kept lubricated by the engine oil, without which the parts will damage each other. The oil pan and the gaskets are located under the car and are attached to the bottom of the engine. It is common for the gaskets to wear out and start leaking oil. You will see oil on the ground beneath your car. If the oil is leaking, you may see an engine oil warning light in the dashboard. If you continue to drive your car without the proper amount of oil, you will risk severe damage to the engine.

When replacing an oil pan gasket keep in mind:

  • If road debris has caused damage in your oil pan gasket, then your oil pan may be damaged as well.
  • Oil pan gaskets can collect grease from many leaking parts. It’s important for a mechanic to verify that the gasket is leaking directly from the oil pan, and not just collecting oil from a different leak.
  • Oil pan gaskets can be made out of many different materials.

Steps for changing an oil pan gasket

  • Check oil pan for leaks and damage.
  • Remove engine oil pan and gasket.
  • Remove oil and filter.
  • Clean oil pan.
  • Install new gasket.
  • Add new engine oil and filter.
  • Run engine to operating temperature and check for any oil leaks.

When to replace an oil pan gasket

Any time your vehicle is serviced or inspected, you should have the oil checked. Even if a mechanic doesn’t look at your oil pan gasket directly, simply checking the oil will usually indicate if there’s a problem. If your Oil Low warning light becomes illuminated or you notice that your vehicle is leaking oil, schedule an inspection immediately.

What common symptoms indicate you may need to replace the Oil Pan Gasket?

  • Consistent oil leak in the same spot under your car.
  • Smoke from engine compartment due to oil leaking on hot exhaust pipes.

How important is replacing an oil pan gasket?

Your engine needs oil to function properly and safely. The oil in your car is collected and stored in the oil pan. The oil pan gasket acts as a seal for the oil pan. When the gaskets are damaged, oil will leak out of the oil pan, past the gaskets, and out of your engine. As a result, your engine will lose oil, which can result in catastrophic engine damage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0

Nazareth

27 years of experience
275 reviews
Nazareth
27 years of experience
Mercedes-Benz G550 V8-5.5L - Oil Change - Pasadena, California
Nazareth is an exceptionally competent and nice person, It was a pleasure to deal with. Highly recommending his service.

Jason

32 years of experience
507 reviews
Jason
32 years of experience
Mercedes-Benz G550 V8-5.5L - Car is not starting - Saratoga, California
Jason is very knowledgeable and great at what he does. He is punctual and very friendly. I highly recommend him for any type of car service.

Tabitha

17 years of experience
319 reviews
Tabitha
17 years of experience
Mercedes-Benz G550 V8-5.5L - Headlight Bulb Replacement (Driver Side Low Beam) - La Jolla, California
very knowledgable, patient and good comunicator., detailed explanations.

Dan

39 years of experience
975 reviews
Dan
39 years of experience
Mercedes-Benz G550 V8-5.5L - Mass Airflow Sensor - Cumming, Georgia
Dan was quick and efficient with many different things. Everything is working great now.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0
Number of Mercedes-Benz G550 services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Is it Safe to Drive With a Faulty Knock Sensor?
Symptoms of a bad or failing engine knock sensor include slow acceleration, reduced fuel economy, and the Check Engine Light turning on.
How to Buy a Good Quality Window Sunshade
While While your car came from the automaker with a sun visor that protects your eyes from the glare of the sun when you’re behind the wheel or sitting in the front passenger seat, rear passengers, unless you are in...
P0259 OBD-II Trouble Code: Injection Pump Fuel Metering Control "B"
What What the P0259 code means The powertrain control module (PCM) has recognized a discrepancy in the signal voltage that is supplied to the electronic fuel control actuator and the signal returned from the fuel metering control sensor. Please note...

how to tell if my mass air sensor or my tps is the problem?

You did not state the model and size of engine you have? Most Nissan distributor engines have a base timing between 13 and 17 degrees BTDC (before top dead center) at 700 to 800 RPM. If you have the timing...

Broke spark plug while trying to take it out

Hello. You will need to have the vehicle taken to a mechanic that has the special tool to get the broken plug out (maybe). I say maybe cause the tool may not get out the broken pieces and the cylinder...

Car won't start after getting gas

Hello. If this is occurring right after you get fuel then most of the time it is caused by a vent valve or purge valve that is sticking open. Most of the time it is a purge valve problem. This...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com