Mercedes-Benz E500 Headlight Bulb Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(81)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(81)

Headlight Bulb Replacement Service

How much does a Headlight Bulb Replacement cost?

On average, the cost for a Mercedes-Benz E500 Headlight Bulb Replacement is $155 with $15 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2003 Mercedes-Benz E500V8-5.0LService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$212.02Shop/Dealer Price$232.58 - $280.07
2003 Mercedes-Benz E500V8-5.0LService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$203.01Shop/Dealer Price$220.47 - $265.65
2005 Mercedes-Benz E500V8-5.0LService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$203.01Shop/Dealer Price$220.52 - $265.72
2004 Mercedes-Benz E500V8-5.0LService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$203.01Shop/Dealer Price$220.52 - $265.72
2006 Mercedes-Benz E500V8-5.0LService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$203.01Shop/Dealer Price$223.09 - $270.23
2006 Mercedes-Benz E500V8-5.0LService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$203.01Shop/Dealer Price$220.76 - $266.15
2003 Mercedes-Benz E500V8-5.0LService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$203.01Shop/Dealer Price$220.54 - $265.77
1994 Mercedes-Benz E500V8-5.0LService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$176.59Shop/Dealer Price$187.49 - $212.88
Show example Mercedes-Benz E500 Headlight Bulb Replacement prices

What are headlight bulbs and how do they work?

Headlight bulbs are encased in a carefully designed housing that illuminates the roadways and makes your car visible to other drivers and pedestrians. They rely on the vehicle’s electrical system for power. There are many types of headlight bulbs in use today including sealed beams, halogen plug-in bulbs, LED (light emitting diode), and HID (high intensity discharge) bulbs. Some car models are sold with headlight options and a mechanic may rely on your car’s VIN to determine the type of headlight system in your vehicle.

All headlamps rely on reflectors in the lamp housing to focus the headlight bulbs. This allows the most useful pattern of light to be cast onto the roadway. Halogen bulbs have a gas that allows for additional light. HID bulbs use two electrodes within the bulb that charge the gas to produce the light. LED bulbs operate at a lower temperature and the light shown on the road tends to be lower than HID bulbs. All headlights are designed to provide a well lit driving path when natural sunlight is not enough.

When to replace headlight bulbs?

  • Bulb is blown out. All of the various headlight bulb types are replaced if the bulb itself has failed. This is the most common scenario.
  • Bulb has dimmed. Some bulb types, particularly halogen bulbs, will produce significantly less light output as the bulb filament ages from use. LED and HID lighting do not dim with age and thus are generally only serviced if the light source has failed.
  • Headlight circuit fails. Note that in some cases, the bulbs are not the underlying issue that leads to the need for replacements. Instead wiring to the bulb, terminal connections, bulb sockets, and system components could be the underlying problem.

How do mechanics replace headlight bulbs?

  • Halogen bulbs and sealed beams, which are generally modular plug in components, are accessible once the hood is raised.
  • The replacement procedure for LED and HID bulbs will depend on whether the light source itself is faulty or if it’s a component in the circuit. Removal procedures for sophisticated HID and LED systems vary by car model and mechanics follow the repair procedures in the factory service manual for your model.
  • For all bulb types, wiring and bulb sockets must be carefully inspected when replacing bulbs to ensure that the electrical connections are complete and secure.
  • Finally, the installed newly bulbs are turned on to ensure normal operation.

Is it safe to drive with a headlight problem?

Headlights must always be fully functional after dusk to drive safely. Should your car have a failed headlight and is driven only when there is adequate daylight, you can put off the repair until it is convenient. Working headlights are required by law in throughout the U.S. whenever the car is used on public roads from sunset to sunrise and in many other specified conditions as well, such as when it is raining or when visibility is reduced due to smoke, fog, or other factors.

When replacing headlights keep in mind:

  • If a bulb does not have a visible filament that can inspected and tested, a mechanic might first test to see if there is power to the bulb. This is most applicable if your car has LED or HID lighting, which can fail if electronics in the circuit is faulty.
  • Halogen lamps and sealed beams should be replaced in pairs so that illumination levels are equal on both sides of the car.
  • Plastic lenses on many headlights degrade over time. Should there not be any issues with the bulbs, these can be replaced to restore your vehicle’s lighting system to a like new condition.
  • The condition of bulb sockets, the ground connection, fuses, and all components of the headlight circuit are important to proper and reliable functioning of the headlights and a mechanic should consider those aspects.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(81)

Rating Summary
72
5
2
0
2
72
5
2
0
2

John

23 years of experience
879 reviews
John
23 years of experience
E500 2003 - Exhaust Gas Recirculation/EGR Valve - Pearland, TX
Excellent

Kevin

20 years of experience
478 reviews
Kevin
20 years of experience
E500 2006 - Crankshaft Position Sensor - Norcross, GA
Very professional and knowledgeable!!!

Brett

5 years of experience
264 reviews
Brett
5 years of experience
E500 2003 - Fuel Pump - Austin, TX
Brett 5starr as always only one I choose to deal with nothing personal just from my experience with service he's as good as it gets.

Brett

5 years of experience
264 reviews
Brett
5 years of experience
E500 2003 - Camshaft Position Sensor - Austin, TX
AAA service as always only one of two I'll call because it is what it is...

Excellent Rating

(81)

Rating Summary
72
5
2
0
2
72
5
2
0
2
Number of Mercedes-Benz E500 services completed
891+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Buy a Car When You Have No Credit History
Can you still buy a car if you have no credit history? Yes, but you'll need to take some extra steps to get approved for a loan with no credit.
A Buyer’s Guide to the 2012 Buick Enclave
The The 2012 Buick Enclave was created specifically for younger buyers and those with growing families who have a taste for luxury. The Enclave is available in four levels which include: base, convenience, leather, and premium. It has ample room...
Symptoms of a Bad or Failing Canister Purge Solenoid
Common signs of a problem with a car EVAP canister purge solenoid include rough idle, difficulty starting, and the Check Engine Light turning on.

How do you operate the hazard lights?

If you are ever stranded on the side of the road, you’ll need to use your hazard lights to warn other drivers of your presence. Depending on where you live, it may also be legal to use your hazard lights...

Nissan primera p11 won't rev pass 2500 rpm

Hi there. The car sounds like it has gone into limp mode for some reason. I would double check to be sure the MAF (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement) is working properly as this will cause this type of reaction as well. Check to...

What is the normal rpm for a 2010 Honda Accord at 70 mph

Hi Peggy. Thanks for the question tonight. 2,500 while on the highway at 70 mph is about right. It is a little on the high side, but within the average RPM levels.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com