Mercedes-Benz E43 AMG Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(487)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(487)

Brake Pad Replacement Service

How much does a Brake Pad Replacement cost?

On average, the cost for a Mercedes-Benz E43 AMG Brake Pad Replacement is $194 with $99 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Mercedes-Benz E43 AMGV6-3.0L TurboService typeBrake Pads - Rear ReplacementEstimate$336.31Shop/Dealer Price$397.89 - $555.63
2018 Mercedes-Benz E43 AMGV6-3.0L TurboService typeBrake Pads - Front ReplacementEstimate$565.61Shop/Dealer Price$693.28 - $1053.76
2017 Mercedes-Benz E43 AMGV6-3.0L TurboService typeBrake Pads - Front ReplacementEstimate$565.61Shop/Dealer Price$693.28 - $1053.76
2017 Mercedes-Benz E43 AMGV6-3.0L TurboService typeBrake Pads - Rear ReplacementEstimate$293.31Shop/Dealer Price$352.89 - $509.12
Show example Mercedes-Benz E43 AMG Brake Pad Replacement prices

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(487)

Rating Summary
455
21
4
3
4
455
21
4
3
4

Damian

11 years of experience
465 reviews
Damian
11 years of experience
Mercedes-Benz E350 V6-3.5L - Brake Pads Replacement (Rear) - Bowie, Maryland
arrived early. professional and thorough. definitely will use and recommend again

Joel

11 years of experience
140 reviews
Joel
11 years of experience
Mercedes-Benz C250 L4-1.8L Turbo - Brake Pads Replacement (Rear) - Frisco, Texas
Very good experience. He was very kind and AI think he took very well of my car. Interesting this way to do everything to make my card keeping in health.

Brandon

20 years of experience
773 reviews
Brandon
20 years of experience
Mercedes-Benz E350 V6-3.5L - Brake Pads Replacement (Front) - Orlando, Florida
Excellent service. I will continually request Brandon to work on my vehicle. his knowledge is amazing and his skill is just as great. he performed all my maintenance and went above and beyond the normal duties. I will definitely recommend him again.

John

36 years of experience
429 reviews
John
36 years of experience
Mercedes-Benz ML350 V6-3.5L - Brake Pads Replacement (Rear) - San Francisco, California
John is puctial, knowledgeable and has a great work ethics mechanic. Thanks for the job well done. Highly recomend him.

Excellent Rating

(487)

Rating Summary
455
21
4
3
4
455
21
4
3
4
Number of Mercedes-Benz Brake Pad Replacement services completed
5357+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1000+
experts on our platform

Recent articles & questions

How Long Does an Air Bleed Housing Assembly Last?
The The air bleed housing assembly is located near the rear of your car’s engine. It is part of the cooling system, and consists of a small housing that has an attached bleeder valve. It only comes into play after...
P2409 OBD-II Trouble Code: Fuel Cap Sensor/Switch Circuit Range/Performance
P2409 P2409 code definition Fuel Cap Sensor/Switch Circuit Range/Performance What the P2409 code means P2409 is an OBD-II generic code for the Engine Control module (ECM) detecting the fuel cap sensor, switch or circuit is out of range or performance...
P0829 OBD-II Trouble Code: 5-6 Shift
P0829 means the vehicle isn't shifting between Gears 5 and 6 properly, possibly due to low transmission fluid or a damaged shift solenoid.

no power to fuel sending unit in tank

The fuel pump relay in the engine relay box powers the fuel pump to run, but the fuel pump relay is turned on and off by the engine control module on pin 19 brn/wt wire grounding the circuit. You will...

After brake switch & assembly replacements, brake lights stay on

Hello. This sounds like you may have a short in the wiring that goes to the brake light switch. I would recommend having a qualified professional use a digital multimeter to test the brake switch circuit for excess resistance. If...

My 2001 BMW X5 won't start. I think it is due to power loss

Hello, the first questions to answer are "Are any problem codes set? Is your Check Engine light on?". Based on your observation of "no power", and your extended mileage, there are several problems likely that would result in "no power":...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com