Mercedes-Benz CLS53 AMG Windshield Wiper/Washer System Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5,576)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5,576)

Windshield Wiper/Washer System Inspection Service

How much does a Windshield Wiper/Washer System Inspection cost?

On average, the cost for a Mercedes-Benz CLS53 AMG Windshield Wiper/Washer System Inspection is $133 with $38 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2019 Mercedes-Benz CLS53 AMGL6-3.0L Turbo HybridService typeWindshield Wiper/Washer System InspectionEstimate$190.75Shop/Dealer Price$219.69 - $284.01
Show example Mercedes-Benz CLS53 AMG Windshield Wiper/Washer System Inspection prices

The windshield wiper and washer system help keep a windshield clean and free of rain, dirt, sleet or snow. This system is not only a convenience but a safety system as well. Limited visibility due to a dirty windshield can make safe driving difficult or impossible.

There are a number of components in the wiper/washer system that can malfunction and cause problems. Everything from a blown fuse to a bad pump can leave a windshield dirty.

How this system works:

Windshield wipers use two different technologies to keep the windshield clean. An electric motor using a worm gear provides the power to move the wipers while a linkage converts the rotational output of the electric motor into the familiar back and forth motion of the wiper blades.

The windshield washer system uses a washer pump that is installed at the base of the washer fluid reservoir. The pump is activated by a spring-loaded switch, this switch turns on the wipers as well. The fluid is pumped through a rubber or plastic hose that runs up to windshield and separates in two lines that feed the washer nozzles on the hood of the car.

Common reasons for this to happen:

Windshield Wiper Issues

  • Worn wiper blades: Wiper blades need to be replaced on a regular basis. Worn wiper blades will not clean the windshield. Smearing or streaking are common symptoms of worn blades. If the blades chatter this can also indicate dirty or worn blades. Torn or cracking blades need to be replaced.

  • Bent or loose wiper arms: Wiper arms can become bent, usually due to vandalism. If the wiper blades are not cleaning the windshield but still appear to be in good shape loose or bent wiper arms could be the problem.

  • Malfunctioning wiper arm linkage: The linkage between the wiper motor and the blades can become damaged. The most common symptom of a broken linkage is one wiper arm not working.

  • Blown fuse: A blown fuse will cut off the electric current to the wiper motor. If both blades fail to function when turned on, a blown fuse is usually the starting point for a diagnosis.

  • Bad wiper motor: If the blades fail to operate at all, are operating slowly, only operate on one speed or do not stop in the correct position a bad or malfunctioning wiper motor could be the culprit. The motor will need to be repaired or replaced.

  • Defective wiper switch: If the wipers do not turn on when the switch is flipped, keep running after being switched off or it is impossible to select the proper speed settings the switch may be defective and will have to be replaced.

Windshield Washer Issues

  • No washer fluid: One of the most common reasons windshield washers fail to work is because the fluid reservoir is empty.

  • Blown fuse: Fuses provide overcurrent protection to all of the vehicle’s electrical units and this includes the windshield washer system. If a fuse blows, the electrical current to the washer pump will be cut off and the washer system will not work.

  • Bad windshield washer switch: The switch that turns on the windshield washer can malfunction and fail to send a signal to the pump. If this happens the pump will not work.

  • Broken washer pump: The electric pump that sends the fluid from the reservoir to the nozzles can malfunction or break.

  • Leaky washer tubes or bottle: The washer reservoir or the tubing that moves the fluid to the nozzles can crack or leak. This can lead to lost fluid on route to the nozzles, which can result in a weak spray or no spray at all.

  • Clogged washer tubes or nozzles: The tubing or the nozzles themselves can become clogged with debris. The nozzles, which are quite small can easily get clogged by dirt, leaves or other debris.

  • Frozen washer fluid: In extremely cold weather it is possible for washer fluid to freeze. If the fluid is frozen it should thaw as the car warms up.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the windshield wiper or washer system issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning windshield wiper or washer system is usually not a life or death situation but it should be addressed as soon as it is convenient. This can become a very real problem if the weather suddenly turns bad as limited visibility can make driving extremely dangerous.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,576)

Rating Summary
5,188
189
54
28
117
5,188
189
54
28
117

Joseph

42 years of experience
55 reviews
Joseph
42 years of experience
Mercedes-Benz CLK320 V6-3.2L - Windshield Wiper/Washer System Inspection - Raleigh, North Carolina
Joseph was thorough. quick and knowledgeable. I am extremely satisfied with the entire experience.

Jerry

30 years of experience
48 reviews
Jerry
30 years of experience
Mercedes-Benz C43 AMG V8-4.3L - Windshield Wiper/Washer System Inspection - Las Vegas, Nevada
Jerry did a great job. definitely knows MB. very clean operation.

Mark

11 years of experience
349 reviews
Mark
11 years of experience
Mercedes-Benz E320 L6-3.2L - Windshield Wiper/Washer System Inspection - Menlo Park, California
10/10, really! I came back to YM.com with my second car for Mark to diagnose some suspicious engine noise - cracked belt! Saved thousands due to timely preventive maintenance! Thanks, Mark!

Chris

15 years of experience
112 reviews
Chris
15 years of experience
Mercedes-Benz ML500 V8-5.0L - Car shuts off when stepping on gas pedal - Zephyrhills, Florida
Chris is great! He knows what he’s doing.

Excellent Rating

(5,576)

Rating Summary
5,188
189
54
28
117
5,188
189
54
28
117
Number of Mercedes-Benz services completed
61336+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Tell If Your Car Switches Are Dying
Since Since every part of your car is controlled or operated by a switch in some fashion, it is to be expected that the switch will eventually fail. Some of the most commonly used switches in your car are: Power...
The Traveler’s Guide to Driving in Croatia
Croatia Croatia is a fascinating country that is finally getting more attention as a vacation destination. There are many historical sites to visit (http://www.adcidl.com/Driving-in-Croatia.html), as well as beautiful natural areas where you can hike and enjoy the scenery. If you...
B1933 OBD-II Trouble Code: Air Bag Passenger Circuit Open
B1933 means there is a circuit failure in the airbag deployment system on the passenger's side, mostly likely due to an incomplete circuit.

Car ran hot and now it will crank, but will not start.

Hi there. From the description you have provided, your vehicle will crank, but will not start, needs to be properly diagnosed. Replacing parts without diagnosing, can be costly and time consuming. The fact you got the engine to start after...

I just rebuilt my 65 RFE transmission and it works great but am getting the code 4th gear ratio incorrect.

Check the transmission fluid and see if its full and clean. If the fluid is original, then I suggest flushing out the fluid and changing the transmission oil filter. If the fluid is good and has been changed, then the...

the engine has a melattic rattleing sound and oil leaking

Hello, thank you for writing in. The noise may be related to the oil leak. Low oil pressure and lack of lubrication to the engine causes a large number of engine components to wear quickly and rub when they should...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com