Mercedes-Benz CLK500 Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(53)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(53)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Mercedes-Benz CLK500 Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Mercedes-Benz CLK500V8-5.0LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2003 Mercedes-Benz CLK500V8-5.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2006 Mercedes-Benz CLK500V8-5.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2005 Mercedes-Benz CLK500V8-5.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
Show example Mercedes-Benz CLK500 Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(53)

Rating Summary
48
3
0
0
2
48
3
0
0
2

Rigoberto

11 years of experience
739 reviews
Rigoberto
11 years of experience
Mercedes-Benz CLK500 V8-5.0L - Battery - Chicago, Illinois
Great customer service, very knowledgeable!

James

19 years of experience
96 reviews
James
19 years of experience
Mercedes-Benz CLK500 V8-5.0L - Window Motor / Regulator Assembly Replacement (Passenger Side Rear) - Anthem, Arizona
Just had James over. He was great and was upfront. This was no bait and switch scam that others are saying. The cost was upfront and the quoted price was exact. The window regulator took longer than anticipated but didn’t up charge. Definitely will use James again and refer to family and friends.

Christopher

20 years of experience
12 reviews
Christopher
20 years of experience
Mercedes-Benz CLK500 V8-5.0L - Crankshaft Position Sensor - Clearwater, Florida
Chris is an absolute professional. He can get most jobs done in a time efficient and professional manner. He fixed my 2005 Mercedes Benz CLK 500 that would not start. Took him less than an hour to replace the crankshaft position sensor. 10/10 Experience . HIGHLY RECOMMEND

Scott

36 years of experience
899 reviews
Scott
36 years of experience
Mercedes-Benz CLK500 V8-5.0L - Brake Pads Replacement (Front, Rear) - Scottsdale, Arizona
Very satisfied with the quality of service and expert knowlege.

Excellent Rating

(53)

Rating Summary
48
3
0
0
2
48
3
0
0
2
Number of Mercedes-Benz CLK500 services completed
583+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How Long Does a Control Arm Assembly Last?
The control arm assembly keeps the wheels in line with the car’s body to control the motion of the wheels....
How to Replace a Lost or Stolen Car Title in Alaska
The The title to your vehicle is an incredibly important document. You’ll need it in order to register your car if you move to another state, but you’ll also need it if you ever decide to sell the car. If...
How to Become a Certified Mobile Vehicle Inspector (State Car Inspector Certified) in Pennsylvania
Automotive technician jobs include mobile vehicle inspectors. In Pennsylvania complete a state-approved certification course to become an inspector.

Flat spot in motor.

A fixed hesitation point when accelerating points to a specific mechanical issue either in the ignition or fuel system. The mechanical advance in the distributor needs to be checked for free motion and base timing would need to be checked....

Car radiator is not holding coolant

A simple coolant leak can turn into bigger problems. The source of the leak will need to be determined and repaired. Most of the time coolant leaks externally, but it can leak into the engine, or even into the transmission...

My 02 lesabre has a sulfur egg smell what is it it's making me sick

The engine should be checked first to make sure it is not running too rich. If not running rich then the exhaust catalyst (catalytic converters) are bad and need to be replaced.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com