Mercedes-Benz CLK430 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(38)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(38)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Mercedes-Benz CLK430 Power Steering Pressure Hose Replacement is $318 with $223 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2000 Mercedes-Benz CLK430V8-4.3LService typePower Steering Pressure Hose ReplacementEstimate$561.55Shop/Dealer Price$690.69 - $1038.74
2003 Mercedes-Benz CLK430V8-4.3LService typePower Steering Pressure Hose ReplacementEstimate$541.55Shop/Dealer Price$670.72 - $1018.79
2002 Mercedes-Benz CLK430V8-4.3LService typePower Steering Pressure Hose ReplacementEstimate$541.55Shop/Dealer Price$670.72 - $1018.79
2001 Mercedes-Benz CLK430V8-4.3LService typePower Steering Pressure Hose ReplacementEstimate$541.55Shop/Dealer Price$670.68 - $1018.72
1999 Mercedes-Benz CLK430V8-4.3LService typePower Steering Pressure Hose ReplacementEstimate$541.55Shop/Dealer Price$670.75 - $1018.84
Show example Mercedes-Benz CLK430 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(38)

Rating Summary
36
0
1
0
1
36
0
1
0
1

Robert

20 years of experience
1089 reviews
Robert
20 years of experience
Mercedes-Benz CLK430 V8-4.3L - Oil Change - Broomfield, Colorado
Awesome service! I will definitely use again

Bryant

12 years of experience
596 reviews
Bryant
12 years of experience
Mercedes-Benz CLK430 V8-4.3L - Pre-purchase Car Inspection - Indianapolis, Indiana
Very professional and easy to understand. Confident in his information.

Peter

43 years of experience
1321 reviews
Peter
43 years of experience
Mercedes-Benz CLK430 V8-4.3L - 75 Point Safety Inspection - Mesa, Arizona
Peter knows his stuff great person explains everything he's doing

Patrick

33 years of experience
1408 reviews
Patrick
33 years of experience
Mercedes-Benz CLK430 V8-4.3L - Heater Blower Motor - Austin, Texas
Patrick was great ( he showed up early which was appreciated!), however the part was not. Trying to get a replacement from him. The fan motor he replaced is not OEM quality. I will update this review when the job is done right...

Excellent Rating

(38)

Rating Summary
36
0
1
0
1
36
0
1
0
1
Number of Mercedes-Benz CLK430 services completed
418+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How To Use Hazard Lights
Your Your car is equipped with a number of different lights. Depending on the light in question, they serve purposes ranging from visibility to directionality to safety to convenience. Where do your hazard lights fit into that? Actually, it’s a...
What to Do After a Minor Car Accident
The The first thing to do after a minor traffic accident is to stay calm and ascertain if there are any injuries. You’re expected to offer whatever assistance you can if someone is injured. Even if there aren’t injuries, it’s...
Windshield Laws in Georgia
Anyone Anyone who drives a motor vehicle is required to know and follow a variety of road rules to remain safe and legal. However, in addition to those traffic laws, motorists are also required to make sure their vehicles are...

Speedometer cluster lights malfunction

Hello. When this happens it usually means that the bulbs for drive and park have burnt out and need to be replaced. In some cases the entire strip lights have to be replaced to fix the ones that have burnt...

Check engine light P0017ECT - 1998 Volvo S90

Hi there. There are a few different things that can cause this. Most of the time though, this is caused by an issue with the TCM or a power issue to the TCM. I usually start by testing the ignition...

My 2013 dodge avenger will not shift from drive to park or reverse, the shifter moves but doesnt change. also now my trunk will not open with remote or button and car will not start

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com