Mercedes-Benz CLK350 Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(99)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(99)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Mercedes-Benz CLK350 Wheel Bearings Replacement is $419 with $267 for parts and $152 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Mercedes-Benz CLK350V6-3.5LService typeWheel Bearings - Driver Side Front ReplacementEstimate$718.12Shop/Dealer Price$879.66 - $1301.27
2009 Mercedes-Benz CLK350V6-3.5LService typeWheel Bearings - Driver Side Front ReplacementEstimate$686.12Shop/Dealer Price$847.71 - $1269.36
2007 Mercedes-Benz CLK350V6-3.5LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$686.12Shop/Dealer Price$847.71 - $1269.35
2006 Mercedes-Benz CLK350V6-3.5LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$686.12Shop/Dealer Price$847.65 - $1269.24
2007 Mercedes-Benz CLK350V6-3.5LService typeWheel Bearings - Driver Side Front ReplacementEstimate$686.12Shop/Dealer Price$847.75 - $1269.43
2006 Mercedes-Benz CLK350V6-3.5LService typeWheel Bearings - Driver Side Front ReplacementEstimate$686.12Shop/Dealer Price$847.71 - $1269.35
2008 Mercedes-Benz CLK350V6-3.5LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$694.12Shop/Dealer Price$855.33 - $1276.68
2009 Mercedes-Benz CLK350V6-3.5LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$694.12Shop/Dealer Price$856.37 - $1278.51
Show example Mercedes-Benz CLK350 Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(99)

Rating Summary
94
2
1
0
2
94
2
1
0
2

Charles

11 years of experience
69 reviews
Charles
11 years of experience
Mercedes-Benz CLK350 V6-3.5L - Coolant Temperature Switch (Sensor) - Fort Lauderdale, Florida
Nice and friendly and on time

Adrian

8 years of experience
13 reviews
Adrian
8 years of experience
Mercedes-Benz CLK350 V6-3.5L - Car is hesitating and bucking - Miami, Florida
Knowledgeable and professional service! Glad I got Adrian!

Keith

18 years of experience
370 reviews
Keith
18 years of experience
Mercedes-Benz CLK350 V6-3.5L - Headlamp Assembly - Left, Right - Orlando, Florida
did satisfactory job, but we found one part was damaged from my supplier so could only put on one headlight assy...will get a replacement and have Keith back to put it on.....hopefully at about half the cost of the initial appt.

Kevin

24 years of experience
532 reviews
Kevin
24 years of experience
Mercedes-Benz CLK350 V6-3.5L - Car Thermostat Replacement - Atlanta, Georgia
Excellent customer service.

Excellent Rating

(99)

Rating Summary
94
2
1
0
2
94
2
1
0
2
Number of Mercedes-Benz CLK350 services completed
1089+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

P0690 OBD-II Trouble Code: ECM/PCM Power Relay Sense Circuit High
P0690 means a high voltage problem with the power supply to the ECM/PCM which may cause Check Engine Light to come on or the vehicle will not start.
P0990 OBD-II Trouble Code: Transmission Fluid Pressure Sensor/Switch E Circuit High
P0990 means there is an issue with the transmission fluid pressure sensor or switch, likely due to a fluid or component issue.
C1101 OBD-II Trouble Code: ABS Hydraulic Valve Circuit Failure
Trouble code C1101 means the engine control unit (ECU) has detected an unspecified failure in the ABS hydraulic valve circuit.

Truck hard to start and seems to be a fuel injection problem.

The issue may or may not be the Fuel Injection Control Module, but the issue is certainly fuel related. I would recommend having your truck inspected by a professional who is experienced with diesel engine diagnosis. It is possible that...

The car turns off suddenly, no check engine light

Hi there. If the vehicle is just randomly turning off like this, it is almost always caused by a bad crank position sensor (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-crankshaft-position-sensor) on this engine. This is very common and it will not turn on the Check Engine...

How much to install rods and pistons

Hi Kent. Thanks for contacting us today. Unfortunately, internal engine rebuild service is not one our mobile mechanics offer. Installing new pistons, rings, connecting rods and others requires machining the engine block first, which is something that should be done...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com