Mercedes-Benz CL600 Parking brake is stuck Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(6)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(6)

Parking brake is stuck Inspection Service

How much does a Parking brake is stuck Inspection cost?

On average, the cost for a Mercedes-Benz CL600 Parking brake is stuck Inspection is $105 with $0 for parts and $105 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2010 Mercedes-Benz CL600V12-5.5L TurboService typeParking brake is stuck InspectionEstimate$124.99Shop/Dealer Price$139.69 - $150.72
2001 Mercedes-Benz CL600V12-5.8LService typeParking brake is stuck InspectionEstimate$104.99Shop/Dealer Price$119.72 - $130.77
2013 Mercedes-Benz CL600V12-5.5L TurboService typeParking brake is stuck InspectionEstimate$104.99Shop/Dealer Price$119.72 - $130.77
1999 Mercedes-Benz CL600V12-6.0LService typeParking brake is stuck InspectionEstimate$104.99Shop/Dealer Price$119.68 - $130.70
2008 Mercedes-Benz CL600V12-5.5L TurboService typeParking brake is stuck InspectionEstimate$104.99Shop/Dealer Price$119.75 - $130.82
2006 Mercedes-Benz CL600V12-5.5L TurboService typeParking brake is stuck InspectionEstimate$104.99Shop/Dealer Price$119.72 - $130.77
1998 Mercedes-Benz CL600V12-6.0LService typeParking brake is stuck InspectionEstimate$124.99Shop/Dealer Price$135.28 - $143.00
2005 Mercedes-Benz CL600V12-5.5L TurboService typeParking brake is stuck InspectionEstimate$124.99Shop/Dealer Price$135.94 - $144.14
Show example Mercedes-Benz CL600 Parking brake is stuck Inspection prices

Your parking brake is a valuable component that helps ensure better safety when parked on an incline, and also helps reduce unnecessary loading of the transmission. If you’ve ever parked on a hill and not used the parking brake, you’re familiar with the loud “thunk” and lurch that happens when you crank the car and put it in drive when you’re ready to leave. Engaging the parking brake avoids this, and enhances safety. However, if your parking brake is stuck, the light in your dash will stay on, and you may damage the brake shoes while driving.

How this system works:

Your parking brake is actually very little more than a lever attached to a cable. When you pull the parking brake handle in the cabin, it engages a cable. That cable runs from the parking brake handle under the car and to the back wheels. Pulling up on the handle pulls the cable taut, which engages the parking brake.

The brake itself is nothing more than a pair of small brake shoes mounted inside the drum built into the rear rotors of your car. The shoes press outward on the drum, holding the wheel in place (it’s not as strong as your normal brakes, and generally cannot hold the car by itself on anything more than a very gentle incline).

When you put the parking brake handle down, the cable disengages the parking brake and the shoes retract from against the walls of the drum. This releases the vehicle, allowing you to drive without damaging the parking brake.

Common reasons for this to happen:

  • Rust and Corrosion: One of the most common problems with parking brakes is corrosion on the cable that leads to the rear brakes. Once the cable begins to rust, it can stick. When this happens, you won’t be able to release the parking brake.

  • Engaged Too Hard: While uncommon, it is possible for the parking brake to stick if you applied it to hard. If you crank back on the handle as hard as possible, you’re overdoing it, and it’s possible for the cable to stretch, the shoes to stick and more.

  • Damaged/Stuck Adjuster Screw: The rear brake shoes are operated by an adjuster screw. If the screw is stuck, corroded or damaged, it will not move and your parking brake will not disengage.

  • Leaving It Engaged for Too Long: Most of us use our parking brake on a relatively limited basis, leaving it engaged overnight at the longest. In some situations, leaving it engaged for a long period (say over the winter in storage) can cause the assembly to freeze and stick.

What to expect:

Our professional mobile mechanic will come to your home or office to inspect the parking brake handle, cable, lever, adjusting screw, shoes and other components in the system. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect all aspects of the parking brake, from the handle to the cable, all the way back to the lever, the spring, the adjusting screw and the shoes. It may be necessary to remove one or both rear wheels. It may also be necessary to disassemble the rear brakes to reach the parking brake components.

How important is this service?

If your parking brake is stuck, you cannot drive the car without causing further damage. It’s highly advised to leave your car parked where it is if you notice that the Parking Brake light stays on after lowering the handle, or feeling resistance when trying to drive (or smelling burned brake material after driving). One of our professional mechanics will be able to diagnose the problem and restore functionality to your parking brake.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(6)

Rating Summary
4
1
0
0
1
4
1
0
0
1

Kenneth

20 years of experience
801 reviews
Kenneth
20 years of experience
Mercedes-Benz CL600 V12-5.5L Turbo - Brake Pads Replacement (Front) - Los Angeles, California
Very knowledgeable and deligent with his work. He is prompt and always on time.

Patrick

33 years of experience
1449 reviews
Patrick
33 years of experience
Mercedes-Benz CL600 V12-5.8L - Crankshaft Position Sensor - Austin, Texas
Good guy. Arrived 5 minutes early (6:55 A.M.). Got the job done quickly. Excellent knowledge and experience.

Christian

12 years of experience
40 reviews
Christian
12 years of experience
Mercedes-Benz CL600 V12-5.5L Turbo - Water Pump - Valley Village, California
great mecanic. very helpful.

Grzegorz

41 years of experience
473 reviews
Grzegorz
41 years of experience
Mercedes-Benz CL600 V12-5.8L - Water Pump - San Francisco, California
Knows what he is doing, gotta watch the oily hands in the car...

Excellent Rating

(6)

Rating Summary
4
1
0
0
1
4
1
0
0
1
Number of Mercedes-Benz CL600 services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Common Signs Your Drive Belt Is Loose
The most common sign of a loose drive belt is noise, and it can range from a barely audible squeak to an...
Symptoms of a Bad or Failing Water Pump Belt
Common signs include cracks or frayed nylon cords in the belt, squealing noises, and a burning rubber smell from the engine.
Industry News for Automotive Techs: July 20-26
Automotive technician jobs need mechanics trained in computer technology. Anti vibration parts and electric motor magnets are some new car technology.

When i turn left i here a poping noise. When i brake i hear a popping noise. When i hit a bump the whole front end shakes.

Given your mileage, and the symptoms you describe, it is likely your ball joints, both upper and lower, are toast. Potholes, braking, and turns cause the worn joints to move out of position, causing the behavior you describe. For lower...

All dash lights were on for two days and now there is no power, no crank, and shorts when jumping.

If you were able to start and drive the vehicle for two days with all the warning lights on before this, did you notice any other issues during this time? You are going to want to start by replacing the...

I need to now if my 2001 GMC Sierra 1550 4WD had a 3 or 4 spline pitman arm.

Hi there. To see if the pitman arm has 3 or 4 splines, check the splines on it with the nut off. Use a flashlight and look at the splines to see if there are 3 large flat areas or...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com