Mercedes-Benz B250 Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(24)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(24)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Mercedes-Benz B250 Control Arm Assembly Replacement is $180 with $66 for parts and $114 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Mercedes-Benz B250L4-2.0L TurboService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$742.61Shop/Dealer Price$896.78 - $1249.02
2017 Mercedes-Benz B250L4-2.0L TurboService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$941.51Shop/Dealer Price$1108.25 - $1495.74
2013 Mercedes-Benz B250L4-2.0L TurboService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$742.93Shop/Dealer Price$911.26 - $1305.79
2017 Mercedes-Benz B250L4-2.0L TurboService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$683.69Shop/Dealer Price$816.11 - $1150.39
2016 Mercedes-Benz B250L4-2.0L TurboService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$941.51Shop/Dealer Price$1145.94 - $1561.71
2014 Mercedes-Benz B250L4-2.0L TurboService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$648.94Shop/Dealer Price$798.12 - $1162.82
2018 Mercedes-Benz B250L4-2.0L TurboService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$252.87Shop/Dealer Price$297.95 - $406.50
2015 Mercedes-Benz B250L4-2.0L TurboService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$697.69Shop/Dealer Price$852.37 - $1203.34
Show example Mercedes-Benz B250 Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(24)

Rating Summary
22
2
0
0
0
22
2
0
0
0

Matthew

12 years of experience
183 reviews
Matthew
12 years of experience
Mercedes-Benz E320 V6-3.2L - Control Arm Assembly Replacement (Front Lower Left) - Indianapolis, Indiana
Very hard and fast working man.

John

31 years of experience
53 reviews
John
31 years of experience
Mercedes-Benz C280 V6-3.0L - Control Arm Assembly Replacement (Front Lower Left) - Woburn, Massachusetts
Great work! John was able to come by early and finished the job much faster than expected. Very pleasant to deal with and will work with him again in the future!

Tinashe

13 years of experience
605 reviews
Tinashe
13 years of experience
Mercedes-Benz ML350 V6-3.5L - Control Arm Assembly Replacement (Front Upper Left) - Acworth, Georgia
Great mechanic

Michael

27 years of experience
478 reviews
Michael
27 years of experience
Mercedes-Benz S550 V8-5.5L - Control Arm Assembly Replacement (Front Upper Right) - Scottsdale, Arizona
expert!

Excellent Rating

(24)

Rating Summary
22
2
0
0
0
22
2
0
0
0
Number of Mercedes-Benz Control Arm Assembly Replacement services completed
264+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Which Filters in My Car Can Be Cleaned Vs. Replaced?
Car filters clean the air and fluids in your car interior and engine. You can clean the air filter, but you always have to replace the oil filter.
Symptoms of a Bad or Failing Kickdown Cable
If you feel that your car's transmission is shifting roughly, too fast, or too slow, you may need to replace the kickdown cable.
How Long Does a Headlight Bulb Last?
With With all of the different relays that are on a car, it can feel like a full-time job keeping up with them all. One of the most important safety features that a car has is properly working headlights. In...

where is the cold start injector located on a 4.0 1995 ford explorer

Locate the fuel rail which supplies the 6 fuel injectors. There will be an additional line plumbed off of the main fuel rail which, if you trace it, will lead you to the cold start injector (https://www.yourmechanic.com/services/cold-start-injector-replacement) on the manifold....

When I turn to the right no matter how fast im going i hear and feel a popping noise in the steering column, not the front of car. 2003 Toyota Avalon

Hello - this is a bit unusual, although there is at least one flexible steering coupling (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-flex-coupling-steering-damper) in the column that could cause this behavior. And, if your car has the "telescoping steering wheel" option (the steering wheel can be...

Can 205/40z17 84w tires fit on my 2012 Malibu?

Tire size 205/40z17 is not specified for your vehicle and thus does not fit. Use of that size will alter your speedometer reading, at minimum, and possibly affect other vehicle speed sensors affecting shift patterns. Your current tires are probably...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com