Mercedes-Benz AMG GT Black Series Car shuts off when stepping on gas pedal Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5,730)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5,730)

Car shuts off when stepping on gas pedal Inspection Service

How much does a Car shuts off when stepping on gas pedal Inspection cost?

On average, the cost for a Mercedes-Benz AMG GT Black Series Car shuts off when stepping on gas pedal Inspection is $105 with $0 for parts and $105 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
* Mercedes-Benz AMG GT Black SeriesV8-4.0L TurboService typeCar shuts off when stepping on gas pedal InspectionEstimate$124.99Shop/Dealer Price$139.69 - $150.72
* Mercedes-Benz AMG GT Black SeriesV8-4.0L TurboService typeCar shuts off when stepping on gas pedal InspectionEstimate$104.99Shop/Dealer Price$119.72 - $130.77
* Mercedes-Benz AMG GT Black SeriesV8-4.0L TurboService typeCar shuts off when stepping on gas pedal InspectionEstimate$104.99Shop/Dealer Price$119.72 - $130.77
2021 Mercedes-Benz AMG GT Black SeriesV8-4.0L TurboService typeCar shuts off when stepping on gas pedal InspectionEstimate$104.99Shop/Dealer Price$113.39 - $119.68
Show example Mercedes-Benz AMG GT Black Series Car shuts off when stepping on gas pedal Inspection prices

Rough idling, frequent stalling, and inconsistent acceleration are all signs that something is amiss with your car. There are a number of systems that can cause this problem. Everything from electrical to fuel delivery to vacuum system issues can all cause a rough-running, stalling vehicle.

Common reasons for this to happen:

Let’s have a look at some of the more common causes that would make your car stall or stumble when you attempt to accelerate.

  • Faulty ignition components: The ignition coil pulls power from the battery and delivers it to the spark plugs, which ignites the fuel and makes the engine run. The car will display a number of symptoms as the ignition system wears.

Misfiring is one of the first symptoms you will see as a symptom of incomplete combustion due to improperly firing ignition components. As the situation progresses you will have trouble starting the vehicle and your fuel economy will drop dramatically. A flashing “Check Engine” light may be associated with this issue.

Finally, as the ignition system reaches the end of its life, your car will misfire and start to stall. Expect the engine to sputter, cough, and jerk, especially at higher speeds. Irregular sparking will cause the car to stall and it may shut off completely when you bring the car to a stop.

  • Faulty fuel pump: The fuel pump moves fuel from the gas tank to the engine. If the fuel pump is malfunctioning, the engine will be getting less fuel than necessary, which will lead to performance issues, and ultimately cause the vehicle not to start.

One of the first signs of a failing fuel pump is hesitation under acceleration. As the problem progresses, the car will lose power when idling, and eventually it may shut down completely.

  • Bad fuel filter: A fuel filter strains the fuel before it reaches the engine, which protects the fuel injectors. They are essential to a well running engine and require regular replacement. If the fuel filter is not replaced at the recommended intervals, the performance and fuel economy of the engine may suffer dramatically.

A failing fuel filter may exhibit similar symptoms to a failing fuel pump. Power loss, especially on acceleration, may be the first sign. As flow continues to be impeded, the fuel filter may ultimately lead to a no-start condition, as fuel can no longer get to the engine.

  • Vacuum leaks: The engine of a car is basically a large air pump. Air is drawn into the cylinders and mixes with fuel that is compressed and ignited. The air is drawn in through a butterfly valve, which creates a vacuum. The vacuum is used to power a number of auxiliary devices.

The tiniest of leaks can cause engine performance problems. Expect a rough or too-fast idle speed. Misfiring or hesitation during acceleration is another common issue with vacuum leaks. As the leak gets worse, the car will begin to stall. A hissing sound and an illuminated “Check Engine” light will typically also be observed.

  • Bad electrical connections: Modern cars have an extensive electrical system, and a bad connection (or bad ground) can cause a number of issues. Dim or flickering lights can be a sign, as well as difficulty starting the car. The car will make a clicking noise, much like a dead battery or loose battery cable.

  • Dirty or defective idle control valve: The idle control valve controls the amount of air that goes into the engine, which allows the computer to maintain the proper engine speed.

When an idle control valve becomes contaminated or stuck, it may lead to an unsteady and rough idle. The car will stall if the valve is too clogged or when it finally fails. If, while holding the accelerator pedal down, a small amount of pressure keeps the car running at a stop, the idle control valve may require attention. In most late model cars, this problem will usually trigger the Check Engine light.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the stalling condition, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

All conditions that cause this type of stalling problem are fairly severe and require maintenance as soon as possible. None of them will get better without a repair and as they grow more severe your car may stop running altogether, which presents a safety issue for you and your passengers. If your car shuts down when you step on the gas pedal, runs rough, or stalls frequently, you should book an appointment for one of our mechanic to look at it immediately.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,730)

Rating Summary
5,332
192
54
29
123
5,332
192
54
29
123

Chris

15 years of experience
112 reviews
Chris
15 years of experience
Mercedes-Benz ML500 V8-5.0L - Car shuts off when stepping on gas pedal - Zephyrhills, Florida
Chris is great! He knows what he’s doing.

Craig

16 years of experience
67 reviews
Craig
16 years of experience
Mercedes-Benz ML350 V6-3.5L - Brake Rotor/Disc Replacement (Front, Rear) - Los Gatos, California
GREAT SERVICE and professionalism, very knowledgeable in his trait.

Glenn

19 years of experience
77 reviews
Glenn
19 years of experience
Mercedes-Benz R350 V6-3.5L - Thermostat - Arlington, Virginia
Experience was perfect. Glenn arrived ahead of schedule, and finished early. Was polite, thorough, and focused. Results have been money well-spent so far. Process of setting up appointment, etc, online is a breeze, too.

Eduardo

19 years of experience
555 reviews
Eduardo
19 years of experience
Mercedes-Benz 250C L6-2.8L - Car is not starting Inspection - Houston, Texas
Eduardo was great. Got the car started, just like I knew it would.

Excellent Rating

(5,730)

Rating Summary
5,332
192
54
29
123
5,332
192
54
29
123
Number of Mercedes-Benz services completed
63030+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How Long Does a Water Pump (Auxiliary) Last?
Your Your car uses coolant for a number of purposes. It’s essential for keeping the engine within operating temperatures, as well as protecting the block from freezing temperatures. It’s also used to operate your car’s heater. While most vehicles only...
P0077 OBD-II Trouble Code: Intake Valve Control Solenoid Circuit High (Bank 1)
P0077 P0077 code definition Intake Valve Control Solenoid Circuit High (Bank 1) What the P0077 code means P0077 is a generic OBD2 code that is shown when there is a problem with the Bank 1 intake valve control circuit. This...
Why You Should Always Check For Recalls on Your Car
Actor Actor Anton Yelchin was killed early (http://www.nytimes.com/2016/06/21/business/jeep-that-crushed-anton-yelchin-had-been-recalled.html?smprod=nytcore-iphone&smid=nytcore-iphone-share) in the morning on June 19, 2016 at his Studio City, California home. He was 27. Yelchin, who starred in movies such as Star Trek, was killed when his Jeep Grand Cherokee...

Problem with acceleration.

This could be a couple of different issues and would need a qualified mechanic to drive the vehicle to see if it is your transmission or engine causing the acceleration problem. The transmissions in these cars were known to have...

How do I remove the head restraints?

The head restraints can be removed very easily. To do so, simply press and hold the release button at the bottom of the restraint legs, and pull the restraint up until it is removed.

Hello Chris,

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com