Mercedes-Benz 600SEC Parking brake is stuck Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5,730)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5,730)

Parking brake is stuck Inspection Service

How much does a Parking brake is stuck Inspection cost?

On average, the cost for a Mercedes-Benz 600SEC Parking brake is stuck Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Mercedes-Benz 600SECV12-6.0LService typeParking brake is stuck InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
Show example Mercedes-Benz 600SEC Parking brake is stuck Inspection prices

Your parking brake is a valuable component that helps ensure better safety when parked on an incline, and also helps reduce unnecessary loading of the transmission. If you’ve ever parked on a hill and not used the parking brake, you’re familiar with the loud “thunk” and lurch that happens when you crank the car and put it in drive when you’re ready to leave. Engaging the parking brake avoids this, and enhances safety. However, if your parking brake is stuck, the light in your dash will stay on, and you may damage the brake shoes while driving.

How this system works:

Your parking brake is actually very little more than a lever attached to a cable. When you pull the parking brake handle in the cabin, it engages a cable. That cable runs from the parking brake handle under the car and to the back wheels. Pulling up on the handle pulls the cable taut, which engages the parking brake.

The brake itself is nothing more than a pair of small brake shoes mounted inside the drum built into the rear rotors of your car. The shoes press outward on the drum, holding the wheel in place (it’s not as strong as your normal brakes, and generally cannot hold the car by itself on anything more than a very gentle incline).

When you put the parking brake handle down, the cable disengages the parking brake and the shoes retract from against the walls of the drum. This releases the vehicle, allowing you to drive without damaging the parking brake.

Common reasons for this to happen:

  • Rust and Corrosion: One of the most common problems with parking brakes is corrosion on the cable that leads to the rear brakes. Once the cable begins to rust, it can stick. When this happens, you won’t be able to release the parking brake.

  • Engaged Too Hard: While uncommon, it is possible for the parking brake to stick if you applied it to hard. If you crank back on the handle as hard as possible, you’re overdoing it, and it’s possible for the cable to stretch, the shoes to stick and more.

  • Damaged/Stuck Adjuster Screw: The rear brake shoes are operated by an adjuster screw. If the screw is stuck, corroded or damaged, it will not move and your parking brake will not disengage.

  • Leaving It Engaged for Too Long: Most of us use our parking brake on a relatively limited basis, leaving it engaged overnight at the longest. In some situations, leaving it engaged for a long period (say over the winter in storage) can cause the assembly to freeze and stick.

What to expect:

Our professional mobile mechanic will come to your home or office to inspect the parking brake handle, cable, lever, adjusting screw, shoes and other components in the system. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect all aspects of the parking brake, from the handle to the cable, all the way back to the lever, the spring, the adjusting screw and the shoes. It may be necessary to remove one or both rear wheels. It may also be necessary to disassemble the rear brakes to reach the parking brake components.

How important is this service?

If your parking brake is stuck, you cannot drive the car without causing further damage. It’s highly advised to leave your car parked where it is if you notice that the Parking Brake light stays on after lowering the handle, or feeling resistance when trying to drive (or smelling burned brake material after driving). One of our professional mechanics will be able to diagnose the problem and restore functionality to your parking brake.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,730)

Rating Summary
5,332
192
54
29
123
5,332
192
54
29
123

Michael

22 years of experience
67 reviews
Michael
22 years of experience
Mercedes-Benz GLK350 V6-3.5L - Parking brake is stuck Inspection - Las Vegas, Nevada
Great guy. Very friendly. Would definitely recommend him

Amir

3 years of experience
6 reviews
Amir
3 years of experience
Mercedes-Benz GL350 V6-3.0L Turbo Diesel - Pre-purchase Car Inspection - Dallas, Texas
Excellent service, with great recommendations On time and great communication Thank you Zafer

David

36 years of experience
195 reviews
David
36 years of experience
Mercedes-Benz ML320 V6-3.2L - Fuel Pump - Los Angeles, California
David came on time and he knows exactly how to install fuel pump in my car. He is very knowledgeable and help me understand why my car was unoperable. I would surely recommend David to my friends and colleagues and may call for him the next time around.

Rigoberto

11 years of experience
739 reviews
Rigoberto
11 years of experience
Mercedes-Benz SLK280 V6-3.0L - Battery - Oak Park, Illinois
He was punctual, pleasant and fixed the problem expeditiously

Excellent Rating

(5,730)

Rating Summary
5,332
192
54
29
123
5,332
192
54
29
123
Number of Mercedes-Benz services completed
63030+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How Long Does a Blower Motor Relay Last?
During During the summer months, there is nothing more important to a car owner than a properly working air conditioner system. Most car owners are unaware about just how many components have to work together in order for cold air...
Rules of the Road For Florida Drivers
Many Many of the laws for driving are based on common sense, which means they are often the same from one state to the next. However, while you may be familiar with the laws in your own state, other states...
P0558 OBD-II Trouble Code: Brake Booster Pressure Sensor Circuit High
P0558 means there is a voltage problem with the brake booster pressure sensor, likely due to vacuum leaks or a faulty sensor.

Code C342D

Hi there. Either the throttle position sensor (TPS) or the idle air control valve (IAC) is not working. Check the wiring to the TPS sensor and the IAC valve and see if they are plugged in and if there is...

Can I swap a 2006 nissan frontier 4cyl xe model engine with a 1993 nissan pathfinder 6cyl. Thanks

Hi Jesus. Thanks for contacting us today. Unfortunately, a four cylinder to six cylinder conversion is not possible without significant fabrication work being completed. You might want to look for the OEM four-cylinder engine as a replacement or purchase a...

2012 Ford Fusion power steering warning light illuminated

Your vehicle is equipped with electronic power steering (EPS). When a problem is detected in with ESP, the power steering warning light comes on. One common problem with your vehicle is a faulty power steering control module (PSCM). The PSCM...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com