Mercedes-Benz 300TE Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(18)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(18)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Mercedes-Benz 300TE Front Crankshaft Seal Replacement is $392 with $14 for parts and $378 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Mercedes-Benz 300TEL6-3.0LService typeFront Crankshaft Seal ReplacementEstimate$529.98Shop/Dealer Price$558.64 - $599.24
1993 Mercedes-Benz 300TEL6-3.2LService typeFront Crankshaft Seal ReplacementEstimate$428.15Shop/Dealer Price$445.31 - $477.29
1993 Mercedes-Benz 300TEL6-3.0LService typeFront Crankshaft Seal ReplacementEstimate$442.75Shop/Dealer Price$460.36 - $492.67
1991 Mercedes-Benz 300TEL6-3.0LService typeFront Crankshaft Seal ReplacementEstimate$486.55Shop/Dealer Price$505.12 - $538.16
1990 Mercedes-Benz 300TEL6-3.0LService typeFront Crankshaft Seal ReplacementEstimate$486.55Shop/Dealer Price$513.12 - $552.15
Show example Mercedes-Benz 300TE Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(18)

Rating Summary
17
0
0
0
1
17
0
0
0
1

Joe

16 years of experience
453 reviews
Joe
16 years of experience
Mercedes-Benz 300TE L6-3.0L - Spark Plugs - Nashville, Tennessee
Joe is the best!!

Joe

16 years of experience
453 reviews
Joe
16 years of experience
Mercedes-Benz 300TE L6-3.0L - Alternator - Nashville, Tennessee
You can't go wrong when Joe works on your car!

Manuel

33 years of experience
590 reviews
Manuel
33 years of experience
Mercedes-Benz 300TE L6-3.0L - Cooling System Flush - Irvine, California
Timely, courteous and professional!

Joe

16 years of experience
453 reviews
Joe
16 years of experience
Mercedes-Benz 300TE L6-3.0L - Fuel Filter - Nashville, Tennessee
Joe is the best!

Excellent Rating

(18)

Rating Summary
17
0
0
0
1
17
0
0
0
1
Number of Mercedes-Benz 300TE services completed
198+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

P2768 OBD-II Problem Code: Input/Turbine Speed Sensor B Circuit Intermediate
P2768 means a varying, erratic, or irrational signal is sent from the turbine speed sensor due to a faulty sensor, solenoid, or shorted circuits.
How to Install an Ignition Switch
When When your ignition switch (https://www.yourmechanic.com/parts/ignition-switch) fails, it can cause a number of different issues. You may experience anything from a failure to start, to a stalling problem, to a series of electrical issues. There is never a good time...
Guide to Colored Curb Zones in Tennessee
Drivers Drivers in the state of Tennessee have to pay attention to the laws of the road while they are out and driving, but they also need to make sure they know and understand all of the parking laws present...

Windshield wipers are loose

The mounting joint for the wiper blades often comes loose on a vehicle allowing the blades to come "off track". In many cases, the connection can just be tightened. In other cases, the wiper transmission assembly may have broken. I...

Was driving and power steering went out. White smoke was coming from my car. I allowed it to cool down but the sensor kept reading

Hi there. It's always best to have a mechanic physically inspect the vehicle to determine what exactly broke on your car. So, anything we list here is just speculation based on what you described in the question. In most cases,...

Low oil pressure, trouble staying started, oil leaking

Hi Jordan. When you have a rear main seal leak, it's very difficult to repair without removing the engine. Low oil pressure is typically caused by low oil levels, but also a failing oil pump. However, it usually does not...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com