Mazda RX-7 Brake Master Cylinder Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(18)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(18)

Brake Master Cylinder Replacement Service

How much does a Brake Master Cylinder Replacement cost?

On average, the cost for a Mazda RX-7 Brake Master Cylinder Replacement is $251 with $111 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Mazda RX-7R2-1.3L TurboService typeBrake Master Cylinder ReplacementEstimate$439.52Shop/Dealer Price$514.25 - $730.34
1993 Mazda RX-7R2-1.3L TurboService typeBrake Master Cylinder ReplacementEstimate$686.49Shop/Dealer Price$823.45 - $1230.20
1990 Mazda RX-7R2-1.3L TurboService typeBrake Master Cylinder ReplacementEstimate$430.51Shop/Dealer Price$503.50 - $718.28
1994 Mazda RX-7R2-1.3L TurboService typeBrake Master Cylinder ReplacementEstimate$686.49Shop/Dealer Price$823.47 - $1230.24
1990 Mazda RX-7R2-1.3LService typeBrake Master Cylinder ReplacementEstimate$441.91Shop/Dealer Price$519.22 - $743.66
1991 Mazda RX-7R2-1.3LService typeBrake Master Cylinder ReplacementEstimate$441.91Shop/Dealer Price$517.89 - $741.33
1995 Mazda RX-7R2-1.3L TurboService typeBrake Master Cylinder ReplacementEstimate$686.49Shop/Dealer Price$823.49 - $1230.27
Show example Mazda RX-7 Brake Master Cylinder Replacement prices

What is the brake master cylinder and how does it work?

The brake master cylinder has a piston that pressurizes fluid in the brake lines to each wheel cylinder as you apply force to the brake pedal. That pressure moves the pistons that are in the wheel cylinders. As the pistons in those wheel cylinders move, they force the brake pads or shoes tightly against the rotors or drums allowing the car to stop quickly.

The size of the pistons in the master cylinder and in the wheel cylinders are carefully selected when designing a car. This allows drivers to apply moderate pressure on the brake pedal when stopping, but creates tremendous pressure applied at the wheel cylinders. A car can then stop quickly even at high speeds. Depending on how much force is applied to the brake pedal, the pressure in a car’s brake lines will typically be in the range of 800 PSI to 2,000 PSI.

Master Cylinder

When to replace the master cylinder?

  • External fluid leaks. There should be no fluid visible on the external surfaces of any portion of the master cylinder or the plastic fluid reservoir.
  • Low, slowly falling, or spongy brake pedal. Faulty internal seals on the piston can cause internal leaks and also seepage of brake fluid into the power assist brake booster. Internal leaks will typically be accompanied by a low pedal, a spongy brake pedal, or a pedal that slowly sinks as you maintain pressure. In all cases, you will experience reduced braking abilities.
  • Discolored brake fluid. No brake fluids, other than those specified for the year, make, and model, are fully compatible with a car’s internal rubber seals in the master cylinder. Discoloration of brake fluid can also occur due to moisture and particulate contaminants in the fluid.
  • Warning lights on the dash. If the brake system warning light illuminates, there are several potential causes but failure of the master cylinder is in the list of causes that would have to be investigated.

How do mechanics replace the brake master cylinder?

  • On vehicles with power brakes, the master cylinder is bolted to the metal housing of the power brake booster. There is usually an electrical plug connecting to a brake fluid level sensor on the master cylinder reservoir and that plug must be disconnected.
  • Once all steel brake lines are disconnected from the master cylinder, the master cylinder is unbolted from the brake booster and removed from the vehicle.
  • The new master cylinder must be bench-bled to expel air from internal passages that contain the piston. Then the new master cylinder is bolted to the brake booster and the brake lines are reattached. The electrical plug for the fluid level sensor is reconnected.
  • Whenever a new master cylinder is installed, brakes lines to wheel positions must be bled to remove air, old fluid and contaminants. If your vehicle is equipped with anti-lock brakes, the mechanic may use a bidirectional scan tool during brake bleeding to actuate the ABS pump, thus ensuring that all air is removed from the complex valving in the ABS system.
  • All brake line connections that were removed during the master cylinder replacement are inspected for any leakage and the vehicle is road tested to ensure normal operation of the brakes.

Is it safe to drive with a master cylinder problem?

No, any fault in the master cylinder, which is part of the braking system creates a safety risk. A fully operational brake system is essential to quickly stopping your car. Driving a vehicle isn’t safe, if the master cylinder is leaking or has other faults, as braking distances might be longer than normal. The braking system on a vehicle is among the most important safety systems and must be fully functional to safely drive your vehicle.

When replacing the master cylinder keep in mind:

  • The master cylinder is only one component of many in a vehicle’s braking system. During replacement of the master cylinder, all vehicle braking system components should be inspected to ensure maximum braking power is available.
  • The amount of friction material remaining on the brake pads and brake shoes should be verified.
  • Brake lines and flexible rubber hoses at each wheel position should be inspected for corrosion and deterioration.
  • The power brake booster should be evaluated to ensure that power assist is working properly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mazda mechanics

Real customer reviews from Mazda owners like you.

Excellent Rating

(18)

Rating Summary
18
0
0
0
0
18
0
0
0
0

Peter

13 years of experience
119 reviews
Peter
13 years of experience
Mazda RX-7 R2-1.3L - Oil Change - Oakley, California
Peter was on time and kept me informed. He repaired my car i record time and kept me out of an expensive repair shop or dealer service. Thank you Peter. I'll be booking him again for my car needs.

TJ

27 years of experience
362 reviews
TJ
27 years of experience
Mazda RX-7 R2-1.3L - Clutch Master Cylinder & Slave Cylinder Replacement - Port Charlotte, Florida
A++++++++ great job on my Mazda Rx7. Will not hesitate to call for T.J. again for all of my families vehicles maintenance and repairs. He is truly a credit to your organization with all the knowledge and experience he brings to the job.

Richard

22 years of experience
461 reviews
Richard
22 years of experience
Mazda RX-7 R2-1.3L - Fuel Pump - Marietta, Georgia
Richard arrived with parts in hand and in an hour had replaced both the fuel pump and fuel filter. Car is running great now thanks to Richard. What a pro!!!

Andrew

12 years of experience
396 reviews
Andrew
12 years of experience
Mazda RX-7 R2-1.3L - Clutch pedal goes all the way to the floor - Columbia, Maryland
professional, walked me thru the problem and the fix, highly recommend

Excellent Rating

(18)

Rating Summary
18
0
0
0
0
18
0
0
0
0
Number of Mazda RX-7 services completed
198+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform

Recent articles & questions

Why Do Some Cars Have Really Smelly Exhaust Fumes?
Smelly car exhaust fumes mean that something is going wrong. It could be leaking fluids, a failing catalytic converter, or imbalanced air/fuel mix.
Windshield Laws in New York
If If you are a licensed driver in New York, you know you are required to follow numerous traffic laws when navigating the roadways. While those rules are designed to keep yourself and others safe, there are also rules governing...
How to Buy a Personalized License Plate in Maryland
Maryland Maryland offers a variety of different styles of personalized license plates (https://www.yourmechanic.com/article/how-to-find-out-which-license-plates-are-available-in-your-state-by-brady-klopfer) (also known as vanity plates), from personalized car tags to plates that are affiliated with organizations such as universities/colleges, nonprofits, and charities. If you are eligible for...

Air conditioning is blowing warm air

In most cases an AC system will begin to blow warm air due to low refrigerant but occasionally will be due to a bad compressor or condenser. I would first check the refrigerant pressure to determine if there are any...

Front wheel noise when turning the steering wheel

Normally, that is from worn outer CV joints (https://www.yourmechanic.com/article/is-it-safe-to-drive-with-a-damaged-cv-joint). It's a front wheel drive car, it generally means you need new CV joints. The way the things go today is you better just replace the whole driveshaft. Because they make...

After giving another car a jump, what could cause the fuel pump fuse to keep blowing when the car is cranked?

Claimed by Robert Tomashek

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com