Mazda MX-6 Catalytic Converter Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(17)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(17)

Catalytic Converter Replacement Service

How much does a Catalytic Converter Replacement cost?

On average, the cost for a Mazda MX-6 Catalytic Converter Replacement is $937 with $813 for parts and $123 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1988 Mazda MX-6L4-2.2L TurboService typeCatalytic Converter ReplacementEstimate$1775.75Shop/Dealer Price$2195.31 - $3424.76
1988 Mazda MX-6L4-2.2LService typeCatalytic Converter ReplacementEstimate$1921.15Shop/Dealer Price$2383.59 - $3741.60
1989 Mazda MX-6L4-2.2L TurboService typeCatalytic Converter ReplacementEstimate$1749.75Shop/Dealer Price$2169.33 - $3398.80
1989 Mazda MX-6L4-2.2LService typeCatalytic Converter ReplacementEstimate$1921.15Shop/Dealer Price$2383.56 - $3741.55
Show example Mazda MX-6 Catalytic Converter Replacement prices

What is the Catalytic Converter all about?

The catalytic converter is an emissions related component that is mounted in the exhaust pipe. Its purpose is to superheat unburned particles in the exhaust gases that are expelled from the engine. As the engine runs, the catalytic converter warms up to an operating temperature of 500-1200 °F. At this temperature the particles in the ‘dirty’ exhaust are burned and converted into water vapor and carbon dioxide. The catalyst inside is nearly always comprised of precious metals such as platinum, rhodium, or palladium. When the catalyst isn’t able to burn off the unburned hydrocarbons in the exhaust, an unpleasant odor can occur, a rough run or misfire may be felt, or the Check Engine light may illuminate.

Keep in mind:

  • Most cars will require the aftermarket Catalytic Converter to be welded to the exhaust pipes. Mobile mechanics can only do this service if you have a direct fit catalytic converter bought from a dealer.
  • When replacing the catalytic converter, it may be necessary to replace oxygen sensors as well.
  • Catalytic converter symptoms are often similar to other more straightforward issues. Get the Check Engine light diagnosed anytime it illuminates.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The defective catalytic converter is removed
  • The new catalytic converter is installed and the vehicle is started to check for any leaks
  • The vehicle is lowered off the jack stands
  • The vehicle is road tested for proper operation

Our recommendation:

If you are consistently taking short trips with your vehicle, the catalytic converter may not be getting hot enough to completely burn away the hydrocarbons. To prevent the catalytic converter from getting clogged, take your vehicle for the occasional drive on the highway for 15 minutes. This allows the exhaust to sufficiently heat up and burn off any deposits in the catalytic converter.

What common symptoms indicate you may need to replace the Catalytic Converter?

  • Check engine light is on or flashing
  • Car has little or no power
  • Smell of rotten eggs inside the car or out of the exhaust
  • Poor fuel economy
  • Backfiring and rough running

How important is this service?

If the catalytic converter isn’t operating efficiently, the check engine light will come on and your engine can begin to lose performance. If the catalytic converter becomes plugged, the engine light will begin to flash and your engine may stall or no longer start. In extreme cases where the converter is plugged, the excess back pressure created can actually cause internal engine damage. If you are experiencing symptoms related to catalytic converter failure, get it checked soon.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mazda mechanics

Real customer reviews from Mazda owners like you.

Excellent Rating

(17)

Rating Summary
14
0
2
1
0
14
0
2
1
0

Jason

17 years of experience
429 reviews
Jason
17 years of experience
Mazda MX-6 V6-2.5L - Pre-purchase Car Inspection - Fremont, California

Theodore

16 years of experience
1592 reviews
Theodore
16 years of experience
Mazda MX-6 L4-2.0L - Car is not starting - Kenmore, Washington


Theodore

16 years of experience
1592 reviews
Theodore
16 years of experience
Mazda MX-6 L4-2.0L - Oil Change - Bellevue, Washington
I thought he was very knowledgeable and did a great job! I will request him in the future to work on my car. Also, I liked his personality.

Martin

42 years of experience
90 reviews
Martin
42 years of experience
Mazda MX-6 V6-2.5L - 75 Point Safety Inspection - San Marcos, Texas

Excellent Rating

(17)

Rating Summary
14
0
2
1
0
14
0
2
1
0
Number of Mazda MX-6 services completed
187+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Exhaust Gas Recirculation (EGR) Valve
Common signs include engine performance issues like decreased power and acceleration, rough idle, and the Check Engine Light coming on.
Buick Certified Pre-Owned (CPO) Car Program
If If you’re in the market for a used Buick vehicle, you may want to check out cars under their certified pre-owned program. Many manufacturers have a certified pre-owned (CPO) program, and each one is set up differently. Read on...
P2023 OBD-II Trouble Code: Intake Manifold Runner Position Sensor/Switch Circuit Intermittent Bank 2
P2023 means the intake manifold runner control circuit in bank 2 is problematic. This could be due to a damaged component, especially in a sensor.

Car has parasitic battery drain.

I would have a technician such as one from YourMechanic do a parasitic drain test (https://www.yourmechanic.com/services/battery-will-not-hold-a-charge-inspection) on the battery. This is where you connect a amp meter to the battery and pull out fuses until the drain stops to determine...

Windshield wipers don't work

Hi there. If the wipers stopped working on all speeds then the wiper motor may have failed. I typically start with checking the voltage at the motor to see if it is present. If it is not then there may...

The truck cannot be started, u1000 code

The code is for lost communication with the ECM's data lines. Try to loosen and retighten the ECM connector ground and the battery negative cable ground to the body. Clean and check both these connections and clear codes and see...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com