Mazda B4000 Engine is sputtering Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(25)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(25)

Engine is sputtering Inspection Service

How much does a Engine is sputtering Inspection cost?

On average, the cost for a Mazda B4000 Engine is sputtering Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Mazda B4000V6-4.0LService typeEngine is sputtering InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2009 Mazda B4000V6-4.0LService typeEngine is sputtering InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2005 Mazda B4000V6-4.0LService typeEngine is sputtering InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2000 Mazda B4000V6-4.0LService typeEngine is sputtering InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1994 Mazda B4000V6-4.0LService typeEngine is sputtering InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1995 Mazda B4000V6-4.0LService typeEngine is sputtering InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2010 Mazda B4000V6-4.0LService typeEngine is sputtering InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2008 Mazda B4000V6-4.0LService typeEngine is sputtering InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Mazda B4000 Engine is sputtering Inspection prices

In almost all cases, a sputtering engine is trying to tell you that there is a deeper problem that requires immediate attention. An engine running out of gas will definitely sputter but if the gas gauge indicates full, the problem lies deeper inside the engine compartment.

An incomplete combustion in the engine will cause a sputter as can the ignition system. The fuel system, such as a blocked fuel injector may also cause the vehicle to sputter. While a sputtering engine may not seem like a major issue, it is a symptom of a bigger problem that will not self-correct and will eventually result in a much more expensive repair. The source of the sputter should be investigated and repaired as soon as possible.

How this system works:

A sputtering engine can have its root cause located in a number of different systems. Here are two of the more common ones, the exhaust and fuel system.

The exhaust system collects exhaust gases from the cylinder head via the exhaust manifold, which acts as a funnel diverting exhaust gases away from the cylinders. The gases are then released through the front pipe where they travel to the catalytic converter. The catalytic converter removes the harmful elements of the gases such as carbon monoxide and hydrogen monoxide, converting them into inert gases.

The gases exit the catalytic converter into the muffler, which reduces the noise levels of the engine, and finally the exhaust fumes exit the vehicle at the tail pipe.

The fuel system is responsible for storing and supplying fuel to the car to drive the engine. Fuel is mixed with air, atomized and vaporized. This happens in the engine intake system. This mixture is then compressed in the engine cylinder and then ignited which produces the energy which moves the pistons.

Common reasons for this to happen:

  • Leak in Exhaust Manifold: A leak in the exhaust manifold, which collects exhaust gases, can cause the engine to sputter or run unevenly. This condition can also cause the Check Engine light to trigger as well as present increased engine noise and poor performance from the engine. A cracked or leaking exhaust manifold can create dangerous driving condition as the escaping hot gases can melt nearby plastic components. It can also lead to exhaust fumes making their way into the car cabin.

  • Worn Seals or Gaskets: There are a number of gaskets and seals in the exhaust system and if any of them are failing it can create a rough or sputtering engine. Gaskets and seals wear down over time and will eventually have to be replaced. Failing to do this in a timely manner can damage the exhaust manifold which is a much more expensive repair.

  • Failing Catalytic Converter: If the engine is sputtering, running rough and has a smell of rotten eggs it is probably due to a failing catalytic converter. In most cases, the Check Engine light will trigger as well. When a converter starts to fail, it isn’t able to burn off the hydrocarbons in the exhaust, and is no longer breaking down the sulfur created by the engine. This leads to the strong rotten egg smell. Eventually the car will not start at all as the catalytic converter becomes totally blocked.

  • Malfunctioning Oxygen Sensors: Oxygen sensors measure how rich or lean the exhaust gases are when they leave the vehicles combustion chamber. The vehicle computer uses this information to adjust the amount of fuel entering the engine. A dirty or failing sensor puts too much or too little fuel into the engine causing it to run rough or sputter. Oxygen sensors must be replaced on a regular basis.

  • Dirty Fuel Injectors: Fuel injectors spray fuel into the cylinders. It is then mixed with air and ignited. Fuel injector nozzles can become clogged over time, which can lead to a sputtering engine, slow acceleration and the car not having enough power. Fuel injectors can be cleaned if the problem is caught early, but as the conditions worsens, the injectors may have to be replaced.

  • Bad or Dirty Spark Plugs: Spark plugs are responsible for igniting the fuel in the combustion chamber. If they are not working correctly or are dirty they don’t ignite the fuel cleanly and the car can misfire or sputter. The plugs will need to be replaced or cleaned.

  • Dirty Mass Airflow Sensor: The mass airflow sensor measures the amount of air that is entering the fuel injection system. It sends that information to the vehicle computer, which then delivers the proper amount of fuel to the combustion chamber. A dirty mass airflow sensor will send the wrong information the computer resulting in a rough running or sputtering engine.

  • Vacuum Leak: A leak in the vacuum system can lead to a sputtering or rough running engine. As the problem progresses the vehicle can hesitate or stall when accelerating.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the engine is sputtering issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

A mechanic will inspect your car's exhaust system and other important components of your vehicle. This includes the exhaust manifold, exhaust seals and gaskets, oxygen sensors, airflow sensors and more. It may be necessary for the mechanic to crank up your car to diagnose your engine's sputtering.

How important is this service?

In almost all cases, a sputter engine is a symptom of a more serious issue lurking below the surface. If the problem is not diagnosed and repaired in a timely manner the vehicle will likely start to stall, become hard to start and eventually stop running altogether.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mazda mechanics

Real customer reviews from Mazda owners like you.

Excellent Rating

(25)

Rating Summary
25
0
0
0
0
25
0
0
0
0

Manuel

32 years of experience
581 reviews
Manuel
32 years of experience
Mazda B4000 V6-4.0L - Check Engine Light is on - Norwalk, California
Great

Phillip

17 years of experience
85 reviews
Phillip
17 years of experience
Mazda B4000 V6-4.0L - Oil Change - San Antonio, Texas
Phillip actually arrived early and was non-intrusive while doing the job. He went about his work professionally and quietly; had to look outside a couple of times to see if he was still there. I would certainly recommend Phillip and YourMechanic to friends.

Christopher

27 years of experience
352 reviews
Christopher
27 years of experience
Mazda B4000 V6-4.0L - Intake Manifold Gaskets - East Hartford, Connecticut
Chris went above and beyond with getting the old B4000 up and running. Highly recommended.

AL

12 years of experience
238 reviews
AL
12 years of experience
Mazda B4000 V6-4.0L - Stabilizer Bar Links Replacement (Front) - Portland, Oregon
Al was prompt and courteous!

Excellent Rating

(25)

Rating Summary
25
0
0
0
0
25
0
0
0
0
Number of Mazda B4000 services completed
275+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Adjust Car Mirrors for Your Height
Your Your car has three mirrors that provide views behind and to either side of you. While they’re not the most technologically advanced accessories on your vehicle, they’re critically important. If they’re not adjusted properly, your view will be obstructed...
How to Get Smog Technician Certified in Idaho
Automotive technician jobs include smog certified emissions inspectors. In Idaho, how to become an inspector varies by county.
How to Use the OnStar RemoteLink App on Your Smart Phone
OnStar is a driver-assist tool built into many GM vehicles. The OnStar RemoteLink app for smart phones allows drivers to find places or unlock doors.

Car not starting with good cranky sound

Hello. This may be caused by a variety of issues, of which one may potentially be the fuel pump fuse (https://www.yourmechanic.com/services/fuse-replacement). This may also be caused by a fuel pump connectivity issue or relay. If you are mechanically able to...

My four way and left turning signals don't flash

Hello - I suspect there is a bad ground or wiring damage on the left side wiring for the turn signals. The turn signals and emergency warning flashers use the same flasher unit (https://www.yourmechanic.com/services/hazard-turn-signal-flasher-replacement), which explains why the right side...

I'm getting these error codes : 2f4f, 4F81, 4F84, 4F8F

Based on the codes, one of the more likely failures relates to a break in the mechatronic sealing sleeve and adapter (BMW parts nos. 24347588725 and 24347588724). Of course there are other and additional possibilities but such can only be...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com