Mazda B2600 Throttle Body Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(7)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(7)

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a Mazda B2600 Throttle Body Replacement is $1050 with $896 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Mazda B2600L4-2.6LService typeThrottle Body ReplacementEstimate$1981.32Shop/Dealer Price$2437.99 - $3799.07
1990 Mazda B2600L4-2.6LService typeThrottle Body ReplacementEstimate$1952.43Shop/Dealer Price$2402.41 - $3747.80
1993 Mazda B2600L4-2.6LService typeThrottle Body ReplacementEstimate$1971.41Shop/Dealer Price$2426.16 - $3785.81
1991 Mazda B2600L4-2.6LService typeThrottle Body ReplacementEstimate$1971.41Shop/Dealer Price$2426.16 - $3785.80
Show example Mazda B2600 Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

  • Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
  • Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
  • Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

  • The engine cover is removed, if necessary.
  • The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
  • The electrical connections to the throttle body are removed.
  • If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
  • The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
  • The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
  • All cables and electrical connections are restored. The intake air snorkel is reconnected.
  • If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
  • Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

  • Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
  • Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
  • When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mazda mechanics

Real customer reviews from Mazda owners like you.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0

Nick

15 years of experience
90 reviews
Nick
15 years of experience
Mazda B2600 L4-2.6L - Coolant is leaking - Sacramento, California
Very professionable

Gregory

12 years of experience
27 reviews
Gregory
12 years of experience
Mazda B2600 L4-2.6L - Car is not starting - Fresno, California
Good communication, thorough check of the vehicle, left the vehicle in better shape than he found it outside of the reason for the call (replaced an old nasty bolt, filled tires with air, etc.), and was even nice to my dog.

Jay

38 years of experience
1035 reviews
Jay
38 years of experience
Mazda B2600 L4-2.6L - Inspection / Diagnostics - Riverside, California
Jay was very professional and personable and he explained things in terms that were easy to understand. I highly recommend him

Javier

12 years of experience
59 reviews
Javier
12 years of experience
Mazda B2600 L4-2.6L - Engine is backfiring - Tomball, Texas
Javier contacted me because previous bookings ended earlier than scheduled and I was able to have him service my car before my book time which was fantastic! He was quick and knowledgeable and showed me what was wrong and answered all of my questions. I would definitely recommend him and we'll have him come service my vehicle once the parts are in.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0
Number of Mazda B2600 services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Washer Fluid Level Switch
Common signs include the Windshield Fluid Warning Light either not illuminating or staying always on and strange noises coming from the washer pump.
5 Essential Things to Know When Considering Buying a Classic Car
Classic Classic cars, which are those that are at least 10 years old and have historical interest based on production numbers or workmanship, certainly play a siren song for many who want to relive memories from their youth. However, before...
What are the Car Pool Rules in New Mexico?
Car Car pool lanes have been around for a few decades, and have rapidly gained popularity in recent years. These now cover more than 3,000 miles in many of the country’s states, and help a huge number of drivers every...

Car making spinning, rattling noise

The first problem I think of is spark knocking or pinging. This is when the combustion of the air/fuel mixture in the cylinder does not start off correctly in response to ignition by the spark plug, but one or more...

Warning lights on

The ABS light and brake lights indicate that there are faults stored in the Electronic Brake Control Module or EBCM. These faults need to be read out to determine the issues in the ABS system. Now it could be something...

How do i know if there is current going to the ignition coil

Hi Lazaro. Thanks for contacting us tonight. There is a procedure for testing the ignition coils, but we can't post that here - as it's listed in the service and repair manual for your vehicle, with imagery that really helps...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com