Mazda B2200 Hazard / Turn Signal Flasher Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(13)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(13)

Hazard / Turn Signal Flasher Replacement Service

How much does a Hazard / Turn Signal Flasher Replacement cost?

On average, the cost for a Mazda B2200 Hazard / Turn Signal Flasher Replacement is $130 with $35 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1989 Mazda B2200L4-2.2LService typeHazard / Turn Signal Flasher ReplacementEstimate$364.51Shop/Dealer Price$436.89 - $631.53
1982 Mazda B2200L4-2.2L DieselService typeHazard / Turn Signal Flasher ReplacementEstimate$344.51Shop/Dealer Price$416.91 - $611.56
1992 Mazda B2200L4-2.2LService typeHazard / Turn Signal Flasher ReplacementEstimate$165.75Shop/Dealer Price$193.46 - $254.04
1990 Mazda B2200L4-2.2LService typeHazard / Turn Signal Flasher ReplacementEstimate$344.51Shop/Dealer Price$416.89 - $611.52
1987 Mazda B2200L4-2.2LService typeHazard / Turn Signal Flasher ReplacementEstimate$344.51Shop/Dealer Price$416.92 - $611.59
1991 Mazda B2200L4-2.2LService typeHazard / Turn Signal Flasher ReplacementEstimate$344.51Shop/Dealer Price$416.91 - $611.56
1983 Mazda B2200L4-2.2L DieselService typeHazard / Turn Signal Flasher ReplacementEstimate$349.51Shop/Dealer Price$421.77 - $616.32
1993 Mazda B2200L4-2.2LService typeHazard / Turn Signal Flasher ReplacementEstimate$349.51Shop/Dealer Price$422.14 - $616.98
Show example Mazda B2200 Hazard / Turn Signal Flasher Replacement prices

What is the Hazard / Turn Signal Flasher all about?

The hazard / turn signal flasher is a small, electrical device that causes the lights on your vehicle to flash in a rhythmic, steady fashion. It is usually located under the driver’s side of the dash, and is wired in-line with the turn signal lever and hazard switch buttons. When the turn signals or hazard lights are turned on, the circuit’s power is routed through the flasher, which only emits short bursts of power that cause the lights to flash. If the flasher is not working, your hazard or turn signal lights may stay on solid when turned on, not turn on at all, or flash at an undesirable rate.

Keep in mind:

  • Flasher units hardly ever develop problems. Although in older vehicles, the wiring can become compromised.
  • Don’t assume that the problem is with the flasher – it could be something as simple as a blown fuse.
  • Check your bulbs, and replace them if necessary.

How it's done:

  • The vehicle's hood is opened and supported manually
  • The new relays are installed onto a mounting bracket
  • The wiring is connected to the relays and into the vehicle harness
  • The hood manual support is removed
  • The install is verified and the hazard lights are tested for proper operation

Our recommendation:

If your turn signals aren’t working, you will fail a motor vehicle inspection or a roadside check. Examine your fuses to make sure none are discolored – this indicates a blown fuse that could be causing the problem. Check your light bulbs as well. If all are in good working order, then the problem could be the hazard / turn signal flasher, which is part of your car's electrical system. Have one of our expert mechanics inspect and replace the hazard turn signal flasher if required.

What common symptoms indicate you may need to replace the Hazard / Turn Signal Flasher?

  • No turn signals on either side
  • Turn signal on only one side
  • Turn signals light up but don’t flash
  • Turn signal flashes too slow
  • Turn signal flashes too fast
  • Hazard lights don’t work

How important is this service?

Malfunctioning turn signals and hazard lights are critical safety issues. If your turn signals aren’t working, you have no way of communicating your driving intentions to other drivers aside from hand signals. Have one of our expert mechanics check them immediately so that the problem can be diagnosed, and appropriate measures taken, such as replacing your hazard / turn signal flasher.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mazda mechanics

Real customer reviews from Mazda owners like you.

Excellent Rating

(13)

Rating Summary
11
1
0
1
0
11
1
0
1
0

Ramiro

21 years of experience
73 reviews
Ramiro
21 years of experience
Mazda B2200 L4-2.2L - Pre-purchase Car Inspection - Seattle, Washington
Very professional and friendly! Ramiro was excellent and a very good communicator. I would love to have him as my mechanic in the future!

Nelson

26 years of experience
163 reviews
Nelson
26 years of experience
Mazda B2200 L4-2.2L - Car is not starting - Antelope, California
Great mechanic, he was really fast, showed up early and went thru everything. Explained everything wrong and explained what should be done.

Frank

40 years of experience
57 reviews
Frank
40 years of experience
Mazda B2200 L4-2.2L - Intake Manifold Gaskets - Snellville, Georgia
Completed timely

Adam

10 years of experience
5 reviews
Adam
10 years of experience
Mazda B2200 L4-2.2L - Clutch Master Cylinder - Monroe, Washington
Adam is a excellent Manchic.

Excellent Rating

(13)

Rating Summary
11
1
0
1
0
11
1
0
1
0
Number of Mazda B2200 services completed
143+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform

Recent articles & questions

The Best Used Cars to Buy If You're a Farmer
If If you're a farmer, you know that what you need isn’t a used car – it’s a used pickup truck. How else are you going to haul around hay, implements, garden produce, fertilizer, and all the other things you...
How Long Does a Tie Rod End Last?
The tie rod end is located in your vehicle’s steering system. Most modern vehicles use a rack and pinion system. The...
P0160 OBD-II Trouble Code: 02 Sensor Circuit No Activity Detected (Bank 2 Sensor 2)
P0160 P0160 code definition Trouble code P0160 is set when no activity is detected on the bank 2 sensor 2 oxygen sensor circuit. Bank 2 refers to the side of the engine opposite of cylinder number one. Sensor 2 means...

Spits and sputters in higher rpm

Hey there. You need to try and reset the point gap to .025 and then run the engine again. You should also get a spark tester and see how much power your coil is putting out. If it is not...

Why is it running hot? 1999 Mitsubishi Galant

Hello - it sounds like you may be experiencing a blown head gasket (https://www.yourmechanic.com/question/head-gasket-blown), or the radiator is clogged. Given that the radiator cooling fan is coming on, the thermostat, appears to be opening and the water pump is transferring...

Would performing a heater core bypass give my AC colder air in my 2001 Jeep Wrangler

Hello. Unfortunately this will not help. If the blend doors under the dash are working fine then the heater core should be completely blocked out when the a/c is on. If the system is functioning properly and the system pressures...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com