Mazda 626 Transfer case fluid is low Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(134)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(134)

Transfer case fluid is low Inspection Service

How much does a Transfer case fluid is low Inspection cost?

On average, the cost for a Mazda 626 Transfer case fluid is low Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1998 Mazda 626V6-2.5LService typeTransfer case fluid is low InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1984 Mazda 626L4-2.0LService typeTransfer case fluid is low InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1997 Mazda 626V6-2.5LService typeTransfer case fluid is low InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1985 Mazda 626L4-2.0LService typeTransfer case fluid is low InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1982 Mazda 626L4-2.0LService typeTransfer case fluid is low InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2000 Mazda 626V6-2.5LService typeTransfer case fluid is low InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1985 Mazda 626L4-2.0L DieselService typeTransfer case fluid is low InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1989 Mazda 626L4-2.2L TurboService typeTransfer case fluid is low InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Mazda 626 Transfer case fluid is low Inspection prices

If you have a four-wheel drive or an all-wheel drive car, you have more than just the engine and the transmission to worry about. You also have a transfer case, which is responsible for sending power from the transmission to all four wheels via drive shafts. If your transfer case fluid is low, there’s a problem that should be repaired before you can safely drive.

How this system works:

A transfer case does exactly what the name implies – it transfers power from the transmission to the wheels. However, it will work differently depending on the type of vehicle you drive. If you drive a four-wheel drive truck, then the primary wheels are driven by the driveshaft and the transfer case really only comes into play when you engage four-wheel drive mode. However, if you have an all-wheel drive vehicle, or an all-time four-wheel drive system, then the transfer case will be used at all times (because all four wheels must work at once, at all times).

The transfer case mounts to the end of the transmission, and a shaft extends from the transmission into the transfer case. Inside the transfer case, there are internal forks and gears that are responsible for transmitting the rotational power of the transmission to two other drive shafts – one going to the rear differential, and another going to the front differential. Within each differential, rotational power is split again, and redirected at 90 degrees to each wheel.

Common reasons for this to happen:

  • Leaking Input Seal at Transmission: If you’re experiencing low transfer case fluid, one of the first possible problems to consider is the input seal on the transmission side of things. Over time and through normal wear and tear, these seals will degrade, eventually letting fluid seep out.

  • Leaking Output Shaft Seal Rear: Another potential problem is the output shaft seal where the rear drive shaft attaches to the transfer case. Like the input seal on the transmission side, this one can also wear to the point that it begins to leak.

  • Leaking Output Shaft Seal Front: You have one other potential seal that might be leaking. This one is located where the front drive shaft connects with the transfer case. Like the other two we’ve mentioned, this seal will eventually degrade and begin to leak.

  • Leaking Vent Hose: While unlikely, it’s possible that you’re losing transfer case fluid from the vent hose.

  • Failed Speed Sensor Gasket: If your transfer case is equipped with a speed sensor, it’s possible that you’re leaking fluid around the sensor (the seal has failed).

  • Leaking Transfer Case Gasket: The transfer case gasket is a lot like an oil pan gasket in that it will eventually degrade to the point that it begins to leak fluid (all gaskets and seals on your vehicle are subject to wear, leakage and eventual failure).

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect the leak from your transfer case, as well as the condition of all seals and the level of your fluid. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect the transfer case first to determine the location of the leak. It may be necessary to clean old fluid from the transfer case and then test drive the vehicle to determine the actual source of the leak. The mechanic will also check the level of fluid.

How important is this service?

If your transfer case is leaking, the internals are in danger of experiencing high heat and friction. Just like your differentials and your transmission, the moving parts within the transfer case must be lubricated properly at all times, or damage will result (depending on the setup of your vehicle, damaged transfer case components could leave the vehicle unable to be driven). One of our professional mechanics can inspect your transfer case, determine the point of the leak, and repair the problem.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mazda mechanics

Real customer reviews from Mazda owners like you.

Excellent Rating

(134)

Rating Summary
121
10
2
0
1
121
10
2
0
1

Gustavo

17 years of experience
410 reviews
Gustavo
17 years of experience
Mazda 626 L4-2.0L - Serpentine/Drive Belt - San Antonio, Texas
During the work on drive belt, he broke the yellow holder for oils stick. I found broken piece next day, it was easy to see. I guess this was an accident, and he did not notice this, but he should be more careful and not to the rush.

Brandon

18 years of experience
318 reviews
Brandon
18 years of experience
Mazda 626 L4-2.0L - Distributor Rotor and Cap - Raleigh, North Carolina
Great job! very knowledgable, and he took the time to explain what he was doing and why.

Richard

21 years of experience
15 reviews
Richard
21 years of experience
Mazda 626 L4-2.0L - Radiator Hose Repair - San Jose, California

Alfred

31 years of experience
86 reviews
Alfred
31 years of experience
Mazda 626 L4-2.0L - Alternator - San Diego, California
Once again, Al has come through for us big time. We will schedule him whenever we need a mechanic in the future.

Excellent Rating

(134)

Rating Summary
121
10
2
0
1
121
10
2
0
1
Number of Mazda 626 services completed
1474+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform

Recent articles & questions

What Components of the Heating and AC System Are Most Likely to Fail?
The The average automotive heating and cooling system (HVAC) is actually very complex, and they’re not connected to one another outside the cabin. Yes, your HVAC controls allow you to switch from warm air to cold, adjust the fan speed...
P2761 OBD-II Trouble Code: Torque Converter Clutch Pressure Control Solenoid Control Circuit/Open
P2761 P2761 trouble code definition The P2761 code relates to the control solenoid valve assembly’s function within the torque converter clutch (TCC), which eliminates efficiency loss of fluid coupling by locking the two parts of the torque converter together when...
How to Anchor a Child Safety Seat
The purpose of child safety seats is to keep children safe when riding in a car. To ensure this, the seat must be installed and secured properly.

When cold the car misses. Later in the day it runs good. This is a new car to me recently purchased. Morning temps are mid 40's

Hello there, many different faults can cause your 2004 Hyundai Santa Fe to run poorly when cold. The most likely faults would be a stuck open thermostat, coolant temperature sensor (https://www.yourmechanic.com/services/coolant-temperature-switch-sensor-replacement), oxygen sensor (https://www.yourmechanic.com/services/oxygen-sensor-replacement), vacuum leak, or exhaust leak. A...

trying to check my ac clutch relay on my 2007 rav4, but it's not where it's supposed to be? the slot is not there?

The a/c magnetic clutch relay is in the under hood No. 1 relay block. It is marked "MG CLT". If you apply battery voltage to terminals "1" and "2" of the relay, there should be close to zero resistance across...

I just replaced the rear [struts](/topics-strut/) on my 98 [camry](/topics-camry/), they were monroe quick struts and I replaced them with the same, the old ones were around 8 years old and the suspension needed replacing, i just finished installing everything, i torqued everything to proper spec except the upper mount inside the car, can't get a torque wrench in there because its so tight and can't use a socket to tighten, had to use a combination wrench but I did get them tight, originally after installing before driving I heard squeaks when depressing the suspension but I wasn't so worried about that because they're brand new and haven't been depressed before, now after driving around the neighborhood with windows open listening for sounds I strained to hear anything but there wasn't anything over the sound of the car. After parking I hear a clunking sound after depressing one side of the car. I also replaced the stabilizer end links and the stabilizer bushings, the end links were really difficult to tighten, especially with a torque wrench but theyre at least at 25 ft/lbs which is the spec I found online, kind of concerned about that as well because I found a one off quote for the spec at 60 ft/lbs which I don't think is likely to be correct because in order to tighten you've got to grab this tiny round bolt housing on the ball joint in order to tighten and the tighter you want to get the tighter you need to squeeze on the round housing. Finally I'm a little concerned the stabilizer bar isn't centered, i mean it seems that way and it was difficult to get the clips around the new bushing back on, as in they really only fit one way and it was tough getting them threaded in the first place without a bunch of adjustment. I'm wondering what that clunking sound is, how to diagnose it, how to fix it, and anything else that could be an issue after the replacement.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com