Mazda 2 Steering Rack/Gearbox Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(65)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(65)

Steering Rack/Gearbox Replacement Service

How much does a Steering Rack/Gearbox Replacement cost?

On average, the cost for a Mazda 2 Steering Rack/Gearbox Replacement is $990 with $668 for parts and $322 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2013 Mazda 2L4-1.5LService typeSteering Rack/Gearbox ReplacementEstimate$1692.18Shop/Dealer Price$2034.38 - $3042.35
2011 Mazda 2L4-1.5LService typeSteering Rack/Gearbox ReplacementEstimate$1671.46Shop/Dealer Price$2009.59 - $3014.52
2012 Mazda 2L4-1.5LService typeSteering Rack/Gearbox ReplacementEstimate$1671.46Shop/Dealer Price$2009.65 - $3014.62
2014 Mazda 2L4-1.5LService typeSteering Rack/Gearbox ReplacementEstimate$1671.46Shop/Dealer Price$2009.65 - $3014.61
Show example Mazda 2 Steering Rack/Gearbox Replacement prices

What is the Steering Rack/Gearbox all about?

A rack and pinion system uses several large components. This includes your main-shaft, universal joints, and an underlying intermediate shaft which immediately responds to all your steering wheel movements.

This rack and pinion system is designed to make your car’s steering easier to turn with the added help of a power assisted pump or motor. The typical car sold these days now weighs over 3000 pounds and larger vehicles like trucks and SUVs often weigh over 5000 pounds. The steering rack along with this power assist system are what allow you to easily move all that heavy mass between the steering wheel and your tires without so much as breaking a sweat.

Keep in mind:

The steering rack requires heavy and sometimes sophisticated equipment to operate properly. Many of the big and heavy parts that are underneath your vehicle, such as the shafts and universal joints, can gradually wear out over the course of time.

If you feel your steering is tight, chances are your rack is perfectly fine. It’s when your steering feels sloppy, or when you start seeing power steering fluid underneath your vehicle, that an inspection should be done. Also, keep in mind that damage to major suspension parts, such as your CV axles, ball joints, and tie rod ends, can make your steering feel loose and uneven.

This is why it’s a good idea to have your entire steering and suspension system inspected whenever you suspect that there is an issue with your steering.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The tires are removed and tie rods and steering gear disconnected
  • The steering rack and gear box is replaced
  • The system is filled with new fluid, tires reinstalled
  • The vehicle is lowered off of the jack stands

Our recommendation:

If your steering starts to feel clunky or uneven, get it inspected at the earliest possible opportunity. Even a minor issue, such as a cracked seal in between major components, can leak power steering fluid onto your steering rack. This can lead lead to the deterioration or even the complete failure of your steering rack. It’s worth your time to contact one of our top-rated mechanics so that the quickest and most reasonable solution can be pursued for your steering system.

What common symptoms indicate you may need to replace the Steering Rack/Gearbox?

  • Sloppy or uneven steering that takes varying levels of effort.
  • Power steering fluid leaks that are usually at the rear of the engine bay or underneath your car.
  • A hard ‘clunk’ noise when you go over large bumps coupled with a feel of being disconnected to the steering wheel.

How important is this service?

Steering is one of those aspects of driving that you never want to shortchange. Often times, a small issue can be due to little more than a leaking power steering hose or a malfunctioning power steering pump. These both tend to be far less expensive repairs than a steering rack.

However, if your steering rack is in need of replacement the consequences of ignoring it can be dire. The worst accidents tend to happen due to the loss of control on a vehicle and your steering rack is the one component that enables your steering to remain precise. If your steering is giving you trouble, it’s important to address it promptly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mazda mechanics

Real customer reviews from Mazda owners like you.

Excellent Rating

(65)

Rating Summary
60
3
1
0
1
60
3
1
0
1

Richard

22 years of experience
461 reviews
Richard
22 years of experience
Mazda 2 L4-1.5L - Oil Change - Lithia Springs, Georgia
Richard was clear and concise in his explanations and recommendations. And friendly to boot! Appreciated his professionalism.

Whitney

40 years of experience
783 reviews
Whitney
40 years of experience
Mazda 2 L4-1.5L - Oil Change - Burlingame, California

Luther

17 years of experience
57 reviews
Luther
17 years of experience
Mazda 2 L4-1.5L - Oil Change - Atlanta, Georgia
Easy, quick, and convenient! Luther was great!

Nicholas

22 years of experience
354 reviews
Nicholas
22 years of experience
Mazda 2 L4-1.5L - Car is overheating - Denver, Colorado
Awesome, I learned a lot

Excellent Rating

(65)

Rating Summary
60
3
1
0
1
60
3
1
0
1
Number of Mazda 2 services completed
715+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Transfer a Car Title in Mississippi
Because Because a car title proves ownership of the vehicle, it is essential that the title be transferred whenever ownership changes. If you’re buying a car from a private seller in Mississippi, you’ll need to transfer the title to your...
P0651 OBD-II Trouble Code: Sensor Reference Voltage B Circuit Open
P0651 means there is a fault within the sensor reference voltage "B" often due too poor, electrical connection or engine control module.
How to Replace a Door Lock Relay
Electric door locks work via a door lock relay located near the brake pedal, behind the stereo, behind the passenger air bag, or under the hood.

How does the tailgate work?

The tailgate on the vehicle works much like a door does. The key can lock it and unlock it, and lifting the handle will allow it to open. Tip The tailgate is hinged at the bottom, so when it opens...

changed electronic throttle body, wrench lights when stopping hard and taking off fast, lose power

Hi there. The wrench light is a service indicator light that is designed to alert the driver that routine service or maintenance is required. In some cases, this light is illuminated when excessive carbon is detected in the fuel system....

My freestlye is throwing code P0845 how should we resolve this?

Hi There, Code P0845 relates to a pressure sensor that is not functioning properly. When the PCM or TCM receives a signal from this sensor, this information is used to control when shifts are made according to hydraulic pressure in...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com