Mazda 2 Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(65)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(65)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Mazda 2 Fuel Injector Replacement is $659 with $519 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2013 Mazda 2L4-1.5LService typeFuel Injector ReplacementEstimate$1733.32Shop/Dealer Price$2131.50 - $3317.94
2011 Mazda 2L4-1.5LService typeFuel Injector ReplacementEstimate$1724.31Shop/Dealer Price$2120.72 - $3305.84
2012 Mazda 2L4-1.5LService typeFuel Injector ReplacementEstimate$1724.31Shop/Dealer Price$2120.75 - $3305.88
2014 Mazda 2L4-1.5LService typeFuel Injector ReplacementEstimate$1184.23Shop/Dealer Price$1445.65 - $2225.72
Show example Mazda 2 Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mazda mechanics

Real customer reviews from Mazda owners like you.

Excellent Rating

(65)

Rating Summary
60
3
1
0
1
60
3
1
0
1

Gary

28 years of experience
226 reviews
Gary
28 years of experience
Mazda 2 L4-1.5L - Pre-purchase Car Inspection - San Pablo, California
Gary performed a pre-purchase analysis and report on a car I was interested in buying. In a nutshell, he saved me a lot of time and money. He also took the time to answer questions I had, and I learned some valuable things in the process. My only regret is that Gary and your service is not available in the Los Angeles area where I reside. I do hope your company expands to Southern California. Thanks, Gary, and thanks, "Your Mechanic.com", for helping me out!

Chris

16 years of experience
312 reviews
Chris
16 years of experience
Mazda 2 L4-1.5L - Oil Change - San Diego, California
Friendly and knowledgable.

Micah

15 years of experience
2 reviews
Micah
15 years of experience
Mazda 2 L4-1.5L - Car is not starting - Fullerton, California
EXTREMELY CAPABLE, DILIGENT AND THOROUGH

Jonathan

19 years of experience
11 reviews
Jonathan
19 years of experience
Mazda 2 L4-1.5L - Strut Assembly Replacement (Front) - San Marcos, California
Jonathan was fantastic to work with. He kept us informed with what was going on with our car the whole time. And kept us in the loop when new charges arose. Very professional. Very clean. Very satisfied.

Excellent Rating

(65)

Rating Summary
60
3
1
0
1
60
3
1
0
1
Number of Mazda 2 services completed
715+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform

Recent articles & questions

Am I Equipped to Be a Mobile Technician?
Automotive technician jobs provide a rewarding career and becoming a mobile technician can improve your auto mechanic salary.
What Does the Low Fuel Level Warning Light Mean?
The low fuel level light warns you when your car is nearing an empty tank of gas. It should be refilled before driving several more miles.
Windshield Laws in Oregon
Motorists Motorists in Oregon are required to follow numerous rules of the road, but there are also additional traffic laws of which they need to be aware. In Oregon, driving a vehicle that does not have the proper equipment, or...

How do I use the front windshield washer?

The windshield washer helps keep your windshield clean. The washer sprays soapy water onto your windshield, and then wipes it away, to rid the windshield of any dirt or debris that had accumulated. Using the front windshield washer is easy:...

How do I use the Unit feature in the driver information center (DIC)?

The Unit feature in the driver information center (DIC) allows you to choose between metric and US measurements for your DIC and cluster displays. Here’s how to change the unit measurement: 1. Press the MENU button until the DIC displays...

I have a overheating problem but I have already changed my water pump and thermostat and had it checked for a blown head gasket

If you do not have a blown headgasket and have a new water pump and thermostat then you must have a blockage in parts of the radiator or the cooling fan or fan clutch is defective. Check fan clutch is...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com