Lincoln Mark VIII Brake Master Cylinder Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(32)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(32)

Brake Master Cylinder Replacement Service

How much does a Brake Master Cylinder Replacement cost?

On average, the cost for a Lincoln Mark VIII Brake Master Cylinder Replacement is $287 with $147 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Lincoln Mark VIIIV8-4.6LService typeBrake Master Cylinder ReplacementEstimate$448.10Shop/Dealer Price$527.68 - $752.23
1996 Lincoln Mark VIIIV8-4.6LService typeBrake Master Cylinder ReplacementEstimate$468.29Shop/Dealer Price$545.41 - $768.13
1997 Lincoln Mark VIIIV8-4.6LService typeBrake Master Cylinder ReplacementEstimate$603.80Shop/Dealer Price$701.56 - $983.13
1994 Lincoln Mark VIIIV8-4.6LService typeBrake Master Cylinder ReplacementEstimate$468.29Shop/Dealer Price$545.46 - $768.21
1995 Lincoln Mark VIIIV8-4.6LService typeBrake Master Cylinder ReplacementEstimate$468.29Shop/Dealer Price$548.56 - $773.63
1998 Lincoln Mark VIIIV8-4.6LService typeBrake Master Cylinder ReplacementEstimate$603.80Shop/Dealer Price$701.95 - $983.82
Show example Lincoln Mark VIII Brake Master Cylinder Replacement prices

What is the brake master cylinder and how does it work?

The brake master cylinder has a piston that pressurizes fluid in the brake lines to each wheel cylinder as you apply force to the brake pedal. That pressure moves the pistons that are in the wheel cylinders. As the pistons in those wheel cylinders move, they force the brake pads or shoes tightly against the rotors or drums allowing the car to stop quickly.

The size of the pistons in the master cylinder and in the wheel cylinders are carefully selected when designing a car. This allows drivers to apply moderate pressure on the brake pedal when stopping, but creates tremendous pressure applied at the wheel cylinders. A car can then stop quickly even at high speeds. Depending on how much force is applied to the brake pedal, the pressure in a car’s brake lines will typically be in the range of 800 PSI to 2,000 PSI.

Master Cylinder

When to replace the master cylinder?

  • External fluid leaks. There should be no fluid visible on the external surfaces of any portion of the master cylinder or the plastic fluid reservoir.
  • Low, slowly falling, or spongy brake pedal. Faulty internal seals on the piston can cause internal leaks and also seepage of brake fluid into the power assist brake booster. Internal leaks will typically be accompanied by a low pedal, a spongy brake pedal, or a pedal that slowly sinks as you maintain pressure. In all cases, you will experience reduced braking abilities.
  • Discolored brake fluid. No brake fluids, other than those specified for the year, make, and model, are fully compatible with a car’s internal rubber seals in the master cylinder. Discoloration of brake fluid can also occur due to moisture and particulate contaminants in the fluid.
  • Warning lights on the dash. If the brake system warning light illuminates, there are several potential causes but failure of the master cylinder is in the list of causes that would have to be investigated.

How do mechanics replace the brake master cylinder?

  • On vehicles with power brakes, the master cylinder is bolted to the metal housing of the power brake booster. There is usually an electrical plug connecting to a brake fluid level sensor on the master cylinder reservoir and that plug must be disconnected.
  • Once all steel brake lines are disconnected from the master cylinder, the master cylinder is unbolted from the brake booster and removed from the vehicle.
  • The new master cylinder must be bench-bled to expel air from internal passages that contain the piston. Then the new master cylinder is bolted to the brake booster and the brake lines are reattached. The electrical plug for the fluid level sensor is reconnected.
  • Whenever a new master cylinder is installed, brakes lines to wheel positions must be bled to remove air, old fluid and contaminants. If your vehicle is equipped with anti-lock brakes, the mechanic may use a bidirectional scan tool during brake bleeding to actuate the ABS pump, thus ensuring that all air is removed from the complex valving in the ABS system.
  • All brake line connections that were removed during the master cylinder replacement are inspected for any leakage and the vehicle is road tested to ensure normal operation of the brakes.

Is it safe to drive with a master cylinder problem?

No, any fault in the master cylinder, which is part of the braking system creates a safety risk. A fully operational brake system is essential to quickly stopping your car. Driving a vehicle isn’t safe, if the master cylinder is leaking or has other faults, as braking distances might be longer than normal. The braking system on a vehicle is among the most important safety systems and must be fully functional to safely drive your vehicle.

When replacing the master cylinder keep in mind:

  • The master cylinder is only one component of many in a vehicle’s braking system. During replacement of the master cylinder, all vehicle braking system components should be inspected to ensure maximum braking power is available.
  • The amount of friction material remaining on the brake pads and brake shoes should be verified.
  • Brake lines and flexible rubber hoses at each wheel position should be inspected for corrosion and deterioration.
  • The power brake booster should be evaluated to ensure that power assist is working properly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lincoln mechanics

Real customer reviews from Lincoln owners like you.

Excellent Rating

(32)

Rating Summary
31
1
0
0
0
31
1
0
0
0

Anthony

6 years of experience
4 reviews
Anthony
6 years of experience
Mark VIII 1998 - Coolant is leaking - Glendale, AZ
Great guy! Very knowledgeable and honest with his work. Top notch!

William

30 years of experience
377 reviews
William
30 years of experience
Mark VIII 1998 - Oil Temperature Sensor - Glendale, AZ
Great mechanic!

William

30 years of experience
377 reviews
William
30 years of experience
Mark VIII 1998 - Oil Pressure Sensor - Glendale, AZ
Great mechanic!

Theodore

10 years of experience
1656 reviews
Theodore
10 years of experience
Mark VIII 1997 - Heater is not working - Bothell, WA
Always helpful, honest and quick. A great mechanic! Gives us cost effective choices on an older car to fix it and keep it going!

Excellent Rating

(32)

Rating Summary
31
1
0
0
0
31
1
0
0
0
Number of Lincoln Mark VIII services completed
352+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lincoln MECHANICS
700+
experts on our platform

Recent articles & questions

How Long Does an AC Control Switch Last?
Every Every year, vehicles become more and more complex, with computer components replacing mechanical parts. This is very apparent in your car’s air conditioning system, which relies on an AC control module to deliver the ideal heating and air conditioning...
P0349 OBD-II Trouble Code: Camshaft Position Sensor A Circuit Intermittent (Bank 2)
P0349 P0349 code definition Your vehicle’s PCM has found an improper wave form or voltage reading from the camshaft circuit A in engine bank 2. What the P0349 code means The camshaft position sensor (https://www.yourmechanic.com/services/camshaft-position-sensor-replacement) works with the notches, or...
How to Diagnose Your Brake Issues
Car brake problems can be caused by different things. You can fix your brakes after doing a visual inspection and some brake tests in a safe space.

Radiator hose rubbing on pully or a belt

If the accident caused the hose to move closer to the pulley then you may not have much choice but to get the body shop to pull the frame back. If you can move the hose then you could use...

Car is hard to start early morning - temp is 26 degree celcius.

Most of the time, cold weather starting issues are caused by low cranking amps in the battery. However, if you're able to crank it over rather easily, you may have a throttle body that needs to be cleaned. Sometimes fuel...

Service Engine Soon Light came on yesterday.

While the oxygen sensor may be the cause of the service engine soon light coming on, it's best to have a certified technician correctly diagnose why the service engine light (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) is on. When the service engine soon - or...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com