logo

Lincoln Mark VII Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(7)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

(7)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Lincoln Mark VII Wheel Bearings Replacement is $200 with $18 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Lincoln Mark VIIV8-5.0LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$279.20Shop/Dealer Price$306.82 - $371.23
1991 Lincoln Mark VIIV8-5.0LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$267.49Shop/Dealer Price$291.08 - $352.49
1992 Lincoln Mark VIIV8-5.0LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$241.49Shop/Dealer Price$258.64 - $300.59
1991 Lincoln Mark VIIV8-5.0LService typeWheel Bearings - Driver Side Front ReplacementEstimate$241.49Shop/Dealer Price$258.64 - $300.58
1990 Lincoln Mark VIIV8-5.0LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$267.49Shop/Dealer Price$294.49 - $358.45
1991 Lincoln Mark VIIV8-5.0LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$241.49Shop/Dealer Price$258.96 - $301.14
1990 Lincoln Mark VIIV8-5.0LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$267.49Shop/Dealer Price$291.17 - $352.65
1992 Lincoln Mark VIIV8-5.0LService typeWheel Bearings - Driver Side Front ReplacementEstimate$241.49Shop/Dealer Price$258.64 - $300.58
Show example Lincoln Mark VII Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Number of Lincoln Mark VII services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lincoln MECHANICS
700+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Meet some of our expert Lincoln mechanics

Real customer reviews from Lincoln owners like you.

Excellent Rating

(7)
Rating Summary
6
0
1
0
0
6
0
1
0
0

Jason

18 years of experience
429 reviews
Request Jason
Jason
18 years of experience
Request Jason
by Samir
Lincoln Mark VII V8-5.0L - Electrical components are not working - Fremont, California
Jason is a very knowledgeable and professional Mechanic . An honest and meticulous person ,very friendly and courteous I am sincerely impressed '

Jason

18 years of experience
429 reviews
Request Jason
Jason
18 years of experience
Request Jason
by Samir
Lincoln Mark VII V8-5.0L - Coolant is leaking - Fremont, California
Very Satisfied .Show a lot care and professionalism , very meticulous and Honest . Was really impressed and shall call on you for any kind of help Thank you so much My sincere compliment to Jason. Samir Hamade

Simon

28 years of experience
378 reviews
Request Simon
Simon
28 years of experience
Request Simon
by Charles
Lincoln Mark VII V8-5.0L - Tune-up - Glenn Dale, Maryland
Timely, Professional and knew his business. Went right to work and diagnosed the problem and made the proper recommendations. the best mechanic I have encountered in some time.....

Melvin

15 years of experience
158 reviews
Request Melvin
Melvin
15 years of experience
Request Melvin
by Tony
Lincoln Mark VII V8-5.0L - Pre-purchase Car Inspection - Bear Creek, North Carolina
I live several hour away, so Melvin did a repurchase inspection for me. He's very responsive and very willing to elaborate on the items from his checklist. In the end, his suggesitons felt like those you'd expect from a trusted friend. Thanks Melvin

Excellent Rating

(7)
Rating Summary
6
0
1
0
0
6
0
1
0
0
Number of Lincoln Mark VII services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lincoln MECHANICS
700+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Recent articles & questions

P2002 OBD-II Trouble Code: Diesel Particulate Filter Efficiency Below Threshold Bank 1
P2002 means there is an efficiency issue with the particulate filter in the exhaust, likely due to a faulty filter or sensor, or exhaust leak.
Read more
A Buyer’s Guide to the 2012 BMW X5 xDrive35d
The The 2012 BMW X5 xDrive35d offer contour seats and smooth acceleration. The suspension offers a smooth ride to the driver and passengers in the vehicle, even for long road trips. It can handle tight curves without any problem while...
Read more
How to Troubleshoot a Faulty Car Thermostat
When you are concerned about the routine maintenance of your car, it is natural to get to a point where you will ask yourself,...
Read more

Screeching noise when turning key

This noise may be the starter internal gear reduction making the noise. The starter would need to be replaced to get rid of the noise. The battery should also be checked. I recommend having a mechanic, like the ones from...
Read more

Transmission fluid leak

Hello. If you have transmission fluid coming from the front of your vehicle, then you either have a ruptured cooler line or the radiator has cracked where the cooler lines go. I would start by getting under the vehicle to...
Read more

My 2003 Mitsubishi Outlander sunroof wont work

Hello there, many common faults will cause your 2003 Mitsubishi Outlander sunroof to not function. The most common failure points are the sunroof switch, wiring harness fault, sunroof track, or sunroof motor failure. If no noise is heard at all...
Read more
  1. Home
  2. Estimates
  3. Lincoln
  4. Mark VII
  5. Wheel Bearings Replacement

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com

Read FAQ
GET A QUOTE