Lexus SC430 Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(81)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(81)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Lexus SC430 Car Thermostat Replacement is $251 with $97 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Lexus SC430V8-4.3LService typeCar Thermostat ReplacementEstimate$363.80Shop/Dealer Price$419.06 - $569.23
2010 Lexus SC430V8-4.3LService typeCar Thermostat ReplacementEstimate$353.89Shop/Dealer Price$405.74 - $553.37
2006 Lexus SC430V8-4.3LService typeCar Thermostat ReplacementEstimate$353.89Shop/Dealer Price$405.79 - $553.45
2007 Lexus SC430V8-4.3LService typeCar Thermostat ReplacementEstimate$353.89Shop/Dealer Price$405.79 - $553.45
2005 Lexus SC430V8-4.3LService typeCar Thermostat ReplacementEstimate$353.89Shop/Dealer Price$408.63 - $558.41
2002 Lexus SC430V8-4.3LService typeCar Thermostat ReplacementEstimate$353.89Shop/Dealer Price$406.06 - $553.92
2008 Lexus SC430V8-4.3LService typeCar Thermostat ReplacementEstimate$353.89Shop/Dealer Price$405.82 - $553.50
2004 Lexus SC430V8-4.3LService typeCar Thermostat ReplacementEstimate$353.89Shop/Dealer Price$405.79 - $553.45
Show example Lexus SC430 Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lexus mechanics

Real customer reviews from Lexus owners like you.

Excellent Rating

(81)

Rating Summary
80
1
0
0
0
80
1
0
0
0

William

17 years of experience
48 reviews
William
17 years of experience
SC430 2004 - Serpentine/Drive Belt - Mesa, AZ
What a great service..... William explained my options did the work , very courteous and polite.. Definitely William will be working on our cars in the future..

Jason

0 years of experience
20 reviews
Jason
0 years of experience
SC430 2002 - Radiator - Tampa, FL
Did not go as planned but at the end of the day Jason made everything right.

Kenneth

6 years of experience
808 reviews
Kenneth
6 years of experience
SC430 2005 - Power Steering Fluid Service - Los Angeles, CA
Very good at what he does

Robert

31 years of experience
228 reviews
Robert
31 years of experience
SC430 2006 - Brake System Inspection - Fairburn, GA
Very Kind and Professional . Thank You ...

Excellent Rating

(81)

Rating Summary
80
1
0
0
0
80
1
0
0
0
Number of Lexus SC430 services completed
891+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lexus MECHANICS
1100+
experts on our platform

Recent articles & questions

10 Best Stores to Buy Auto Parts in West Palm Beach, Florida
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in West Palm Beach is Advance Auto Parts.
How to Replace a Driveshaft Center Support Bearing
The center support bearing for the driveshaft is simple in design and function. It can be difficult to replace due to the driveshaft's complex build.
How to Pick an Extended Car Warranty
A A new vehicle comes with a manufacturer’s new car warranty (https://www.yourmechanic.com/article/what-do-manufacturer-warranties-normally-include) that covers defects and unexpected problems that occur. The new vehicle warranty coverage is in place for a set time or mileage, whichever comes first. When the manufacturer’s...

What does it mean when the computer readout said p0606-engine control module/power train control module and p1680-power train mod

You will need to have the battery and charging system checked for a low voltage of 9 volts or below to the engine control module. The engine code is for low voltage to the module. After the battery low voltage...

Gas tank seal from the filler neck hose.

The nozzle I believe your are mentioning is the anti-siphon and roll-over check valve. It does not require a perfect seal to the tank. The rubber filler hose slides over it, sealing in fuel vapors. I hope this helps. Put...

Car won't turn over

Hello there, a no-start condition is a very common fault. The most likely causes for this to happen on your 1999 Plymouth Breeze would be a battery (https://www.yourmechanic.com/services/battery-replacement), starter (https://www.yourmechanic.com/services/starter-replacement), battery cable (https://www.yourmechanic.com/services/battery-cable-replacement), ignition switch (https://www.yourmechanic.com/services/ignition-switch-replacement), wiring harness fault, or...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com