Lexus LS600h Valve Cover Gasket Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(92)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(92)

Valve Cover Gasket Replacement Service

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a Lexus LS600h Valve Cover Gasket Replacement is $379 with $127 for parts and $252 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Lexus LS600hV8-5.0L HybridService typeValve Cover Gasket ReplacementEstimate$533.32Shop/Dealer Price$608.24 - $807.49
2011 Lexus LS600hV8-5.0L HybridService typeValve Cover Gasket ReplacementEstimate$517.10Shop/Dealer Price$586.46 - $781.53
2015 Lexus LS600hV8-5.0L HybridService typeValve Cover Gasket ReplacementEstimate$517.10Shop/Dealer Price$586.54 - $781.67
2008 Lexus LS600hV8-5.0L HybridService typeValve Cover Gasket ReplacementEstimate$517.10Shop/Dealer Price$586.53 - $781.66
2013 Lexus LS600hV8-5.0L HybridService typeValve Cover Gasket ReplacementEstimate$517.10Shop/Dealer Price$591.18 - $789.79
2009 Lexus LS600hV8-5.0L HybridService typeValve Cover Gasket ReplacementEstimate$517.10Shop/Dealer Price$586.98 - $782.44
2014 Lexus LS600hV8-5.0L HybridService typeValve Cover Gasket ReplacementEstimate$517.10Shop/Dealer Price$586.58 - $781.75
2010 Lexus LS600hV8-5.0L HybridService typeValve Cover Gasket ReplacementEstimate$517.10Shop/Dealer Price$586.53 - $781.66
Show example Lexus LS600h Valve Cover Gasket Replacement prices

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

  • Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
  • Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
  • Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

  • Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
  • Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
  • Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
  • Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
  • Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

  • The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
  • Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
  • Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
  • Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lexus mechanics

Real customer reviews from Lexus owners like you.

Excellent Rating

(92)

Rating Summary
87
1
1
0
3
87
1
1
0
3

James

31 years of experience
1039 reviews
James
31 years of experience
Lexus LS600h V8-5.0L Hybrid - Check Engine Light is on Inspection - Winter Park, Florida
5 stars, was the best mechanic I have had work on my car. He is an expert and knows what he is doing. Thanks.

Brian

19 years of experience
109 reviews
Brian
19 years of experience
Lexus LS600h V8-5.0L Hybrid - Axle / CV Shaft Assembly Replacement (Passenger Side Front) - Lawrenceville, Georgia
Brian worked very hard. Test drove the car with me. I recommend that your co not have Brian or others take pictures of interior when it’s not being serviced.

Mazyar

20 years of experience
587 reviews
Mazyar
20 years of experience
Lexus GS300 L6-3.0L - Valve Cover Gasket - Lithonia, Georgia
Mark provided great service and was on time each time. I highly recommend his service.

Michael

17 years of experience
606 reviews
Michael
17 years of experience
Lexus ES330 V6-3.3L - Valve Cover Gasket - Atlanta, Georgia
Michael was excellent and explained everything in detail. Michael is the example of what a real mechanic should be.

Excellent Rating

(92)

Rating Summary
87
1
1
0
3
87
1
1
0
3
Number of Lexus Valve Cover Gasket Replacement services completed
1012+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lexus MECHANICS
1100+
experts on our platform

Recent articles & questions

Signs Your Car Has a Blown Fuse
If you own your car long enough, you can assume that at some point, one or more of your...
How to Buy a Good Quality Radiator
The The numerous moving parts of a vehicle are certain to rub together, causing friction which generates a generous amount of heat. The motor oil that is being pumped in as lubrication can only do so much – it can’t...
How Long Does a Vent Oil Separator Last?
The The engine in your car can only run when the right number of controlled explosions are performed. During the explosions, there are a number of gases that are produced that will then be filtered out of the engine. The...

My car stalls 4 or 5 times when starting cold

Hi, thanks for your question. You should check the MAP sensor (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-manifold-absolute-pressure-sensor-map-sensor) first to see if it is reading the correct altitude for your location. Sometimes the sensor will read that you are at 10000 feet when you are at...

VW Polo overheats on the highway

Intermittent overheating problems can be very frustrating. But it sound like you've already covered half the bases. Usually overheating problems can be attributed to low coolant, thermostats, or radiators. At other times there may be problems with head gasket leakage...

My cars coolant temp, goes up a little past the half way point it's past the half line only when I'm in traffic, it going 1 or 2 lines past the half way point but it's cools down to the half way point when speeding up only by red light or traffic Wil it past

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com