Lexus IS350 Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(83)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(83)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Lexus IS350 Control Arm Assembly Replacement is $241 with $101 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2011 Lexus IS350V6-3.5LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$574.82Shop/Dealer Price$686.08 - $1005.67
2012 Lexus IS350V6-3.5LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$347.55Shop/Dealer Price$401.15 - $554.73
2006 Lexus IS350V6-3.5LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$467.56Shop/Dealer Price$531.26 - $710.65
2015 Lexus IS350V6-3.5LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$565.81Shop/Dealer Price$674.02 - $991.32
2014 Lexus IS350V6-3.5LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$670.95Shop/Dealer Price$808.02 - $1206.11
2015 Lexus IS350V6-3.5LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$467.56Shop/Dealer Price$531.65 - $711.34
2010 Lexus IS350V6-3.5LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$467.56Shop/Dealer Price$531.31 - $710.72
2015 Lexus IS350V6-3.5LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$292.79Shop/Dealer Price$332.74 - $445.28
Show example Lexus IS350 Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lexus mechanics

Real customer reviews from Lexus owners like you.

Excellent Rating

(83)

Rating Summary
79
2
1
0
1
79
2
1
0
1

Adam

16 years of experience
142 reviews
Adam
16 years of experience
IS350 2006 - Headlight Bulb - Hypoluxo, FL
Great experience using Adam and YourMechanic for the first time. Adam was able to replace both headlight bulbs in a timely manner. Knowledgeable mechanic who I would not hesitate to use again. Great experience at the comfort of my own home. No more waiting around at dealerships for exorbitant prices and services.

Stacy

20 years of experience
330 reviews
Stacy
20 years of experience
IS350 2009 - Electrical components are not working - Fayetteville, GA
Stacy restored my faith in your company!

Carlos

10 years of experience
57 reviews
Carlos
10 years of experience
IS350 2010 - Alternator - Manteca, CA
Wow! Carlos came to my house to install a altanator, talked to me about my Lexus what he was going to do. Carlos is very professional at his job,also on time.i was very very satisfied with his work.Car started right up... checked the charge on the battery to see if the alternator was doing it's Job,and working just fine..thanks to Carlos my mind was also at ease..great job..wish I could give him 10 Stars..

Christopher

20 years of experience
393 reviews
Christopher
20 years of experience
IS350 2006 - Coolant is leaking - Ruskin, FL
Excellent... Very informative

Excellent Rating

(83)

Rating Summary
79
2
1
0
1
79
2
1
0
1
Number of Lexus IS350 services completed
913+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lexus MECHANICS
1100+
experts on our platform

Recent articles & questions

Understanding the Scion Maintenance Required and Service Indicator Lights
Car symbols, or dashboard lights, are a car service reminder. The Scion Maintenance Required light indicates when your car needs service.
How to Replace Your Wiper Blades
Car windshield wiper blades help you see what's ahead when you're driving in bad weather. Use the right size of wiper blade to stay safe on the road.
The Guide to Legal Car Modifications in Nebraska
ARENA Creative / Shutterstock.com If you live in Nebraska or plan to move to the state and you have a modified vehicle, you need to know the laws and regulations to make sure your car or truck...

Changing sensor in 1999 Honda Accord with the check engine light on

Of course. I would try the sensor first. They are cheaper. Realize that oxygen sensor systems are part of a complex computer-driven feedback system. It measures the amount of oxygen in your exhaust, then it gives feedback to your computer...

Need to find the location on the vehicle of TPMS ECU

Hello, and thank you for writing in. There is likely another fuse box on the inside of the cabin at the passenger floorboard. Check there first. Then you can check next to the fuses below the steering column buy the...

Car hesitates and jerks when driving. Check engine code gave maf sensor, but mechanic says the car is too new so he thinks it's th

Hi TR. Thanks for contacting us today. If you could provide us with the exact code that came up, this would be much easier for us to help you locate the possible sources. Just because a code might indicate a...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com