Land Rover LR2 Hazard / Turn Signal Flasher Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(99)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(99)

Hazard / Turn Signal Flasher Replacement Service

How much does a Hazard / Turn Signal Flasher Replacement cost?

On average, the cost for a Land Rover LR2 Hazard / Turn Signal Flasher Replacement is $193 with $98 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Land Rover LR2L6-3.2LService typeHazard / Turn Signal Flasher ReplacementEstimate$311.65Shop/Dealer Price$378.32 - $538.94
2012 Land Rover LR2L6-3.2LService typeHazard / Turn Signal Flasher ReplacementEstimate$291.65Shop/Dealer Price$358.35 - $518.99
2008 Land Rover LR2L6-3.2LService typeHazard / Turn Signal Flasher ReplacementEstimate$291.65Shop/Dealer Price$358.35 - $518.99
2011 Land Rover LR2L6-3.2LService typeHazard / Turn Signal Flasher ReplacementEstimate$291.65Shop/Dealer Price$358.31 - $518.92
2013 Land Rover LR2L4-2.0L TurboService typeHazard / Turn Signal Flasher ReplacementEstimate$291.65Shop/Dealer Price$358.37 - $519.04
2010 Land Rover LR2L6-3.2LService typeHazard / Turn Signal Flasher ReplacementEstimate$291.65Shop/Dealer Price$358.35 - $518.99
2014 Land Rover LR2L4-2.0L TurboService typeHazard / Turn Signal Flasher ReplacementEstimate$296.65Shop/Dealer Price$363.11 - $523.57
2015 Land Rover LR2L4-2.0L TurboService typeHazard / Turn Signal Flasher ReplacementEstimate$296.65Shop/Dealer Price$363.76 - $524.71
Show example Land Rover LR2 Hazard / Turn Signal Flasher Replacement prices

What is the Hazard / Turn Signal Flasher all about?

The hazard / turn signal flasher is a small, electrical device that causes the lights on your vehicle to flash in a rhythmic, steady fashion. It is usually located under the driver’s side of the dash, and is wired in-line with the turn signal lever and hazard switch buttons. When the turn signals or hazard lights are turned on, the circuit’s power is routed through the flasher, which only emits short bursts of power that cause the lights to flash. If the flasher is not working, your hazard or turn signal lights may stay on solid when turned on, not turn on at all, or flash at an undesirable rate.

Keep in mind:

  • Flasher units hardly ever develop problems. Although in older vehicles, the wiring can become compromised.
  • Don’t assume that the problem is with the flasher – it could be something as simple as a blown fuse.
  • Check your bulbs, and replace them if necessary.

How it's done:

  • The vehicle's hood is opened and supported manually
  • The new relays are installed onto a mounting bracket
  • The wiring is connected to the relays and into the vehicle harness
  • The hood manual support is removed
  • The install is verified and the hazard lights are tested for proper operation

Our recommendation:

If your turn signals aren’t working, you will fail a motor vehicle inspection or a roadside check. Examine your fuses to make sure none are discolored – this indicates a blown fuse that could be causing the problem. Check your light bulbs as well. If all are in good working order, then the problem could be the hazard / turn signal flasher, which is part of your car's electrical system. Have one of our expert mechanics inspect and replace the hazard turn signal flasher if required.

What common symptoms indicate you may need to replace the Hazard / Turn Signal Flasher?

  • No turn signals on either side
  • Turn signal on only one side
  • Turn signals light up but don’t flash
  • Turn signal flashes too slow
  • Turn signal flashes too fast
  • Hazard lights don’t work

How important is this service?

Malfunctioning turn signals and hazard lights are critical safety issues. If your turn signals aren’t working, you have no way of communicating your driving intentions to other drivers aside from hand signals. Have one of our expert mechanics check them immediately so that the problem can be diagnosed, and appropriate measures taken, such as replacing your hazard / turn signal flasher.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Land Rover mechanics

Real customer reviews from Land Rover owners like you.

Excellent Rating

(99)

Rating Summary
92
7
0
0
0
92
7
0
0
0

Ben

41 years of experience
1421 reviews
Ben
41 years of experience
Land Rover LR2 L6-3.2L - AC is not working - Houston, Texas
Prompt, thorough and explained issues clearly. Highly recommended!

Matthew

33 years of experience
1229 reviews
Matthew
33 years of experience
Land Rover LR2 L6-3.2L - Battery will not hold a charge - Hampton, Virginia
My go-to mechanic. Always on time or early to meet. Very knowledgeable and able to explain issues in great detail. Quality work and effort. Highly recommend.

Rusty

23 years of experience
515 reviews
Rusty
23 years of experience
Land Rover LR2 L4-2.0L Turbo - Check Engine Light is on - Arlington, Texas
Good.

Ryan

8 years of experience
16 reviews
Ryan
8 years of experience
Land Rover LR2 L6-3.2L - Starter - Philadelphia, Pennsylvania
On time. Quick and painless. Definitely would recommend

Excellent Rating

(99)

Rating Summary
92
7
0
0
0
92
7
0
0
0
Number of Land Rover LR2 services completed
1089+
services done by our mechanics
TOTAL NUMBER OF EXPERT Land Rover MECHANICS
500+
experts on our platform

Recent articles & questions

The Best Used Cars to Buy If You're Over 50
Shopping Shopping for a car when you’re over the age of 50 begins to shift a bit, as your priorities tend to change. Suddenly it’s not so much about what the vehicle looks like, or how much space it has...
P2010 OBD-II Trouble Code: Intake Manifold Runner Control Circuit High Bank 1
P2010 P2010 trouble code definition P2010 is a generic OBD2 trouble code that indicates a fault within the intake manifold runner control circuit. This code is similar to P2005, P2006, P2007, P2008, P2009, P2013 and P2015. What the P2010 code...
High-Paying Mobile Mechanic Jobs Near Me
Our comprehensive guide to finding great-paying mobile mechanic jobs near your location. Nationwide mobile auto technician job opportunities.

On CNG, engine often give a sound of misfiring and got stop, while on petrol no such issue

Hello. The symptoms you are experiencing can be caused by many things. A few things I would look into are the fuel system, the engine management system, and the ignition system. If any of the components, such as the fuel...

The headlights flicker.

The most likely cause for lights flickering would be a bad or loose ground. Make sure battery terminals are tight. Make sure the battery and other engine grounds are tight. Check the connector and harness at each headlight to be...

P0420 code. Jeep wrangler 2011 with 111000 miles. Code disappears after appearing. Light lawnmover sound on acceleration

The P0420 code relates to catalyst efficiency however many of the underlying causes of the code have nothing to do with a fault in the converter itself. To evaluate that code, among the data of interest are long and short...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com