Land Rover Discovery Car starts and then dies Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(117)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(117)

Car starts and then dies Inspection Service

How much does a Car starts and then dies Inspection cost?

On average, the cost for a Land Rover Discovery Car starts and then dies Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2017 Land Rover DiscoveryV6-3.0L TurboService typeCar starts and then dies InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2018 Land Rover DiscoveryV6-3.0L TurboService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2021 Land Rover DiscoveryL4-2.0L Turbo HybridService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2018 Land Rover DiscoveryV6-3.0L Turbo DieselService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2019 Land Rover DiscoveryV6-3.0L Turbo DieselService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2020 Land Rover DiscoveryV6-3.0L Turbo DieselService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2000 Land Rover DiscoveryV8-4.0LService typeCar starts and then dies InspectionEstimate$99.99Shop/Dealer Price$117.28 - $130.25
2019 Land Rover DiscoveryV6-3.0L TurboService typeCar starts and then dies InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Land Rover Discovery Car starts and then dies Inspection prices

Starting a vehicle only to have it quit immediately after can be confusing and annoying for many drivers especially if their vehicle has not experienced this type of issue before. Typically, a vehicle will start and then quit because of an issue with the fuel or electrical system. It is important to monitor fuel levels as well as warning lights which can signal to the driver that a vehicle may quit unexpectedly.

How this system works:

To start a vehicle, the electrical system, composed of the battery and starter, turns the engine over. Once running, the engine requires a constant flow of gasoline and good spark to keep that fuel igniting. If gasoline is not readily available, or if there is not enough spark, the engine will quit. More modern vehicles with sophisticated computers may affect the way the vehicle runs. These computers help the car run efficiently but can also shut a car down if the fuel/air mixture is not correct. While an older vehicle may be less sophisticated and easier to diagnose, the computers on modern cars can provide more specific information when connected to a code scanner/reader.

Common reasons for this to happen:

  • Mass Airflow Sensor: The mass airflow sensor measures how much air is entering the engine and relays this information to the vehicle’s computer so that the right amount of fuel can be delivered from the fuel injectors. When a sensor begins to fail, the vehicle’s computer may generate an error code to indicate that something has gone wrong. An issue with the mass airflow sensor may manifest itself when a car starts and then stalls soon after starting.

  • Fuel Pump Relay: The fuel pump relay functions much like a fuse for an electric fuel pump. The fuel pump relay engages as the vehicle is started and starts the fuel pump. While the vehicle is running, the fuel pump relay turns off and the fuel pump is powered by the oil pressure sending unit. If the vehicle’s computer is unable to keep the fuel pump relay running throughout the starting process, the vehicle may start and quit immediately after starting.

  • Ignition Coil: Your vehicle’s ignition coil takes the low voltage of the battery and provides the thousands of volts needed to create a spark in the spark plugs. When an ignition coil begins to fail, it may struggle to provide consistent spark to the plugs, causing the engine to stall after starting.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why the vehicle starts and then dies. The mechanic will then provide a detailed inspection report outlining why the vehicle quit and the cost of any repairs that need to be made.

How it's done:

A mechanic will begin diagnosing your vehicle’s issue by plugging a code reader/scanner into the vehicle’s computer. The mechanic should be able to get more information from your vehicle’s computer on what component has failed. Using this information, the mechanic can begin necessary repairs.

If your vehicle has a bad or failing mass airflow sensor, the mechanic will begin by finding the sensor in the engine bay and checking for any signs of failure. The mechanic should check the wire harness connected to the sensor to ensure that all of wires are properly connected. After removing the sensor, the mechanic should be able to discover the nature of the failure and replace the sensor.

If the mechanic suspects an issue with the fuel pump relay, he or she should check the vehicle’s computer for a problem. If the vehicle’s computer is having difficulty providing consistent power to the fuel pump relay, the computer may need to be reprogrammed or replaced. If the vehicle’s computer is functioning normally, the mechanic may need to replace the fuel pump relay.

If the mechanic suspects that the ignition coil may be faulty, he or she should first disconnect the battery before beginning work. The mechanic should then begin the process of disconnecting wires from the ignition coil and removing it from the engine bay. The mechanic will then install the new ignition coil and ensure that it is connected properly. The mechanic should then reconnect the battery and test the new coil.

With all repairs, the mechanic will ensure the newly installed parts work properly. The mechanic can then turn off and warning lights that may have come on while the vehicle was not running properly.

How important is this service?

If your vehicle is starting but dying soon after starting, you should have it checked out by a mechanic. Issues involving the fuel management and electrical systems will become worse if not dealt with. Diligence and paying attention to warning lights may help prevent further damage to critical engine component and may save money in repairs. A vehicle that quits after starting can be inconvenient and having a mobile mechanic inspect and repair you vehicle will ensure that you and your vehicle are back on the road soon.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Land Rover mechanics

Real customer reviews from Land Rover owners like you.

Excellent Rating

(117)

Rating Summary
109
5
1
0
2
109
5
1
0
2

Chris

22 years of experience
2223 reviews
Chris
22 years of experience
Land Rover Discovery V8-4.6L - Car starts and then dies - Sun City, California
Chris tried everything that he could, to get the rover working. We are going to donate it to a company. We would like to thanks Chris for all of his efforts, it was truly appreciated. Great job anyway.

Joel

21 years of experience
987 reviews
Joel
21 years of experience
Land Rover Discovery V8-4.0L - Alternator - Jacksonville, Florida
Joel is very professional and knowledgeable. He’s done great work for me each time he’s come out.

Robert

20 years of experience
1089 reviews
Robert
20 years of experience
Land Rover Discovery V8-4.0L - Drive Belt Tensioner Replacement - Denver, Colorado
Punctual and quick. Quality service.

John

27 years of experience
1019 reviews
John
27 years of experience
Land Rover Discovery V8-4.0L - Car is not starting - Houston, Texas
Professional,friendly, knowledgeable in his profession, outgoing, someone who represents his talent in away that one will acquire his services because of his out going personality

Excellent Rating

(117)

Rating Summary
109
5
1
0
2
109
5
1
0
2
Number of Land Rover Discovery services completed
1287+
services done by our mechanics
TOTAL NUMBER OF EXPERT Land Rover MECHANICS
500+
experts on our platform

Recent articles & questions

How Long Does a Low Water Sensor Last?
The The heat that is produced by your engine can be quite harmful if not cooled down. There are a variety of systems in your car that are designed to make sure that the internal temperature of your engine stays...
P2650 OBD-II Trouble Code: “B” Rocker Arm Actuator Control Circuit Open Bank 1
P2650 P2650 trouble code definition “B” Rocker Arm Actuator Control Circuit Open Bank 1 What the P2650 code means P2650 is an OBD-II generic code for the engine control module (ECM) detecting the B rocker arm actuator control circuit for...
P2506 OBD-II Trouble Code: ECM/PCM Power Input Signal Range/Performance
P2506 P2506 code definition ECM/PCM Power Input Signal Range/Performance What the P2506 code means P2506 is an OBD-II generic code for the Engine Control Module (ECM) detecting if the power input signal is not within range or when its performance...

Wheel squeals at high speeds

Hello. Wheel squeals can be caused by a few different things. The most common causes are worn or dirty brakes, or a faulty wheel bearing (https://www.yourmechanic.com/services/wheel-bearings-replacement). If the vehicle's brakes wear low, or become excessively dusty they may vibrate and...

Is Mototehnika a good driveshaft brand?

Hi there. Mototehnika driveshafts are a descent design to have for your vehicle. The best driveshaft to install in the vehicle is an OEM specified driveshaft. There are lots of good reviews about the Mototehnika driveshaft design and a lot...

I have no power at all. No dome light, no radio, nothing. I have replaced the alternator battery and starter and checked all fuses

I suspect your problem is in the power distribution box or in the connections going to it. Chrysler has a fancy name for it, they call it a TIPM for Totally Integrated Power Module. These modules have a lot of...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com