Kia Rio5 Serpentine/Drive Belt Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(26)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(26)

Serpentine/Drive Belt Replacement Service

How much does a Serpentine/Drive Belt Replacement cost?

On average, the cost for a Kia Rio5 Serpentine/Drive Belt Replacement is $164 with $24 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Kia Rio5L4-1.6LService typeSerpentine/Drive Belt ReplacementEstimate$203.94Shop/Dealer Price$219.78 - $259.18
2007 Kia Rio5L4-1.6LService typeSerpentine/Drive Belt ReplacementEstimate$194.93Shop/Dealer Price$209.00 - $247.08
2010 Kia Rio5L4-1.6LService typeSerpentine/Drive Belt ReplacementEstimate$194.93Shop/Dealer Price$209.02 - $247.12
2011 Kia Rio5L4-1.6LService typeSerpentine/Drive Belt ReplacementEstimate$194.93Shop/Dealer Price$209.02 - $247.12
2009 Kia Rio5L4-1.6LService typeSerpentine/Drive Belt ReplacementEstimate$194.93Shop/Dealer Price$210.50 - $249.70
2006 Kia Rio5L4-1.6LService typeSerpentine/Drive Belt ReplacementEstimate$194.93Shop/Dealer Price$209.16 - $247.37
Show example Kia Rio5 Serpentine/Drive Belt Replacement prices

What is a serpentine belt and how does it work?

A serpentine belt is a relatively long, flat, multi-ribbed belt that is driven by the engine’s crankshaft pulley. The belt drives many, and often all, of the engine accessories such as the alternator, air conditioning compressor, power steering pump, water pump, and air pump. The serpentine belt is tensioned by a hydraulic or spring-loaded automatic tensioner. Some older cars use a serpentine belt to drive most accessories but will also have a shorter v-style belt to drive, for example, the power steering pump.

Belts

When to consider replacing the serpentine belt:

  • Regularly scheduled maintenance. Typically, belt manufacturers recommend belt replacement at 90,000 miles. However, the belt must be inspected for wear or damage at regular intervals prior to this high mileage.
  • Squealing noise, belt slippage, visible belt damage. Should the belt fail or wear out prematurely, you may hear noise or you may see visible signs of deterioration such as missing chunks of rubber, excessive cracking, or a shredded appearance on the edge of the belt.
  • Battery Light. A loose belt, perhaps caused by a defective tensioner, may not drive the alternator at adequate speed and thus the battery may discharge, causing the warning light to illuminate.
  • Engine overheating. Often, the serpentine belt drives the water pump. In those applications, if the belt breaks the engine will overheat in seconds to minutes. If the belt is inadequately tensioned, you may notice higher-than-normal engine operating temperature.

How do mechanics replace the serpentine belt?

  • Prior to removing the belt, the mechanic must run the engine to determine if the idler pulley and the belt tensioner are noise-free. Those rotating components have grease filled bearings and are subject to wear. In addition, the mechanic will ensure that all pulleys and accessories are turning in the same plane. These steps help make sure your new belt will operate trouble-free for its full-service life.
  • The belt’s routing path through the various components is noted. The belt tensioner is released, usually with a wrench or lever, to release the tension from the belt. With the tension off, the belt slides off the pulleys.
  • All rotating components — that is the alternator, air conditioner compressor, etc. — are checked for smooth operation and no noise.
  • If everything checks out, the new belt is slipped over all of the pulleys while holding the tensioner away from the belt. Once the belt is centered on all pulleys, the tensioner is released and the installation is complete. The engine is run to ensure normal operation.

Is it safe to drive with a serpentine belt problem?

No. Should the belt have visible damage, you risk unexpected and sudden breakage that could potentially leave you stranded. Serpentine belt problems that result in the alternator not charging may cause the battery to discharge, which will result in loss of electrical power to the vehicle. Additionally, if a deteriorated belt breaks and that belt drives the water pump, the engine will overheat in a matter of seconds.

When replacing the serpentine belt keep in mind:

  • On many cars, the expected service life of a serpentine belt is around 90,000 miles. Should the belt fail well prior to that, a very careful inspection should be performed to check for out-of-alignment pulleys, a possibly out-of-position crankshaft harmonic balancer on which the drive pulley is mounted, binding pulleys, or a defective belt tensioner.
  • Attention should always be given to serpentine belt routing, since proper routing is critical to proper belt tension, and function of the driven components.
  • Sometimes it is difficult to distinguish serpentine belt related noise from other engine noises. In these cases, a mechanic will determine the origin of the noise by momentarily running the engine without the serpentine belt attached.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Kia mechanics

Real customer reviews from Kia owners like you.

Excellent Rating

(26)

Rating Summary
25
0
0
0
1
25
0
0
0
1

Scott

30 years of experience
531 reviews
Scott
30 years of experience
Rio5 2008 - Canister Purge Solenoid - Denver, CO
Fast, courteous, and knowledgeable.

Joe

0 years of experience
528 reviews
Joe
0 years of experience
Rio5 2011 - Engine hesitates during acceleration - La Vergne, TN
Very professional

Excellent Rating

(26)

Rating Summary
25
0
0
0
1
25
0
0
0
1
Number of Kia Rio5 services completed
286+
services done by our mechanics
TOTAL NUMBER OF EXPERT Kia MECHANICS
1100+
experts on our platform

Recent articles & questions

A Day in the Life of a YourMechanic Mobile Technician
Mark Lenhart has been a mobile technician with YourMechanic since 2014. Follow Mark's day as he repairs transmissions and diagnoses leaking fluids.
P2031 OBD-II Trouble Code: Exhaust Gas Temperature (EGT) Sensor Circuit Bank 1 Sensor 2
P2031 P2031 code definition Exhaust Gas Temperature (EGT) Sensor Circuit Bank 1 Sensor 2 What the P2031 code means P2031 is an OBD-II generic code for when the Engine Control Module (ECM) detects that, during the exhaust gas temperature (EGT)...
Car Features for Parents-To-Be
Congratulations, Congratulations, you have a baby on the way! It’s an exciting time in your life -- once you’ve gotten over the panic of being responsible for a little life, that is. There’s so much to look forward to from...

Car is leaking coolant and overheating

You should not let the engine ever run low on coolant. When you get the system checked the mechanic will pressure test the cooling system and locate the leak (https://www.yourmechanic.com/article/how-to-diagnose-a-fluid-leak-by-mark-vallet) or problem for you. You should not have a hot...

Broken crankshaft position sensor

It depends on where the sensor broke as to whether it can still be removed. In most cases, a professional mechanic would remove multiple components that would make it easier to access. Once it's clear, you can usually use a...

No start

A large voltage drop is going to be a bad cable or connections either at battery or starter and engine grounds. Try doing a voltage drop for the positive and negative cables and also try using a jump to the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com